navigation update MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

113 Navigation
Important notes
Navigation main menu
Destination input
Route guidance
During route guidance
Last destinations and destination memory
POIs
Software updates

158 NavigationLast destinations and destination memoryOption
Allocate
to
Entry

Use H, h, g and G to select an
entry to which you wish to assign the
destination address.

Press E.

Press g or G to select one of the
categories
Home Address
and
Work
Address
.

Press E.
The selected entry is updated with the
new address.
The system updates the entry in the
Destinations memory and in the
address book. After that, the Start
Route Guidance menu or the
Last
Destinations
memory reappear.
Activating the destination memory

Activate the Navigation main menu
(page 118).

Press g or G to select menu item Destination Memory
.

Press E.
The destination memory will appear.Selecting a destination from the
destination memory

Activate the destination memory.

Press H, h, g and G to select
the desired entry.
Now you can

start route guidance to the selected
destination

delete the selected destination

view details on the selected
destination (if available)

To do this, press the
Details
soft key.

166 NavigationSoftware Updates

Software UpdatesYou can update the system with a new
navigation DVD. The new DVD may include
new maps and/or new device software.
Starting an update
Switch the COMAND on (
page 27).
DVDs are loaded and ejected at the
navigation computer.Ejecting

Press l.
The navigation computer ejects the
DVD.
Loading

Insert the new navigation DVD into the
DVD slot with the label side up.
The message
Navigation Being
Activated Please Wait
will
appear.After that, the COMAND loads the
software on the DVD.
Shortly after that, the progress bar
appears. After some time, the progress
bar reaches 100%.
The update is completed. You can now
operate the navigation system again.
The message
Navigation Being
Activated Please Wait
appears after
the system is switched on:

for a short time
The update is completed. You can now
operate the navigation system again.

for a longer time
COMAND was unable to update the
software.
iUpdating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.
After updating, the car should remain
outside under open sky for 10 minutes
with the ignition on.iThe navigation computer is located on
the left side in the trunk (
page 115).
iIf you do not remove the DVD from
the slot within around 15 seconds, the
COMAND will pull the DVD into the
drive.