phone MERCEDES-BENZ CL-CLASS 2007 Workshop Manual

215 Control systems
COMAND address book
Calling up the address book
Select “Telephone”
“Telephone”

“Address Book”.
The main address book display ap-
pears. If the address book already con-
tains entries, you will see the data of an
entry.
Illustration: address book entry
Selecting an entry in the main address
book display
Slide omp or rotate ymz until the
main area is selected.
Creating a new address book entry
Select “Telephone”
“Telephone”

“Address Book”
“New Entry”.
The input menu appears with the data
fields and the input characters.
Illustration: input menu for private data
1To switch between work and home
data ( or symbol)
2Selected data field with input mark
(cursor)
3Display of set data type – in example
display, home data is set ( symbol
and “Home” display)
4Input characters
iFor phone book entries in the mobile phone
that contain a name and a telephone number,
you will see the name and the number. If a phone
book entry in the mobile phone contains several
telephone numbers, you will see the message
“Multiple Numbers” instead of a telephone num-
ber.
iPlease observe the following when creating
a new address book entry:
You can define your own address in the destina-
tion memory in navigation mode. When defining
the address, you can transfer data already en-
tered as an address book entry.
In the address book entry, the town/city and
street must be spelled in the same way as the
destination entry so that the data matches the
digital map data.
In order for the state (province) to match the
map data, its complete name or abbreviation
may be entered.
Examples:

Florida or FL

Colorado or CO

Alberta or AB

Ontario or ON
ProCarManuals.com

217 Control systems
COMAND address book
Deleting an entry
Search for desired entry (page 217).
Select “Options”
“Delete”.
A deletion prompt appears.
Select “Yes” or “No”.
The entry will either be deleted or not,
depending on your selection.
Searching for an address book entry
Select “Telephone”
“Telephone”

“Address Book”
“Search”.
The search menu appears with the
smart speller.
1Symbol for complete address data
from the navigation system
2Symbol for summarized entries
from the mobile phone with the same
name but different telephone numbers
3Category symbol
4Smart speller
5Symbol for voice entry
6Back to the main address book displayEntries with category symbol 3 come
from the mobile phone. The following cate-
gory symbols are possible:

= symbol for “Mobile” category

= symbol for “Home” category

= symbol for “Work” category

= symbol for “Fax” category

= symbol for “Pager” category

= symbol for “Main” category or for
unknown category or for phone entries
that are saved on the SIM card of a
GSM mobile phone
Entries without a category symbol or with
the or symbols come from the
COMAND address book. All other entries
come from the mobile phone and are only
visible when the mobile phone is in the cra-
dle*.
It is possible to add voice entries. Entries
with the symbol contain a voice entry
(
page 224).
iYou cannot delete phone book entries from
the mobile phone.
ProCarManuals.com

219 Control systems
COMAND address book
Displaying a complete address book
entry
Searching for the desired entry
Search for an address book entry
(
page 217).
or
Select an address book entry in the
main address book menu
(
page 215).
Press n.
The detailed view appears.
Illustration: detailed view for private data
1To go back to the previous menu
2To switch between work and home
data ( symbol or )
3Selected data field
4Display of set data type – in example
display, home data is set ( symbol
and “Home” display)
5To call up options
iThe options available under “Options” menu
item 4 depend on which data field 3 is select-
ed. The following options may be available:

Displaying abbreviated content in full
(
page 220)

Changing an address book entry
((
page 221)

Changing the description of a telephone
number data field (
page 221)

Adding a telephone number data field
(
page 222)

Calling a number saved in an entry
(
page 222)

Starting route guidance to an entry
(
page 223)

Options for voice entries (page 224)
ProCarManuals.com

220 Control systems
COMAND address book
Switching between private or business
data
Select symbol 2.
The display switches to private or busi-
ness data, depending on the previous
status.
Selecting a different data field
Rotate ymz or slide qmr.
Displaying abbreviated content in full
Select “Options”
“Details”.
The display is shown in full.
Closing entire display: Slide qmr or
omp or pressn.
Closing the detailed view
Select “Back”.Displaying of a complete phone book
entry in the mobile phone
Searching for the desired entry
Search for phone book entry in mobile
phone (
page 217).
or
Select a phone book entry from the
mobile phone using the COMAND
address book menu (
page 215).
Press n.
The detailed view appears.1To go back to the previous menu
2Category symbol
3Display for phone book entry in mobile
phone
4To call up options
iThe mobile phone must be inserted in the
cradle*.
iIf a phone book entry in the mobile phone
has more than one telephone number, you will
see all telephone numbers with the respective
category symbol 2 in the detailed view.
ProCarManuals.com

221 Control systems
COMAND address book
Closing the detailed view
Select “Back”.
Changing an entry
Changing an address book entry
Search for an address book entry
(
page 217) then, select “Options”

“Change”.
or
Display the details of an address book
entry (
page 219) then, select “Op-
tions”
“Change Content”.
The input menu appears with the data
fields.
Proceed as described in the “Switching
between private and business data”
paragraph in the “Creating a new ad-
dress book entry” section
(
page 215).Changing the description of a tele-
phone number data field
Display the details of an entry and high-
light the telephone number data field
(
page 219).
Select “Options”
“Change Entry
Name”.
Select a number category, e.g. “Home”.
Select a telephone category, e.g. “Land
Line”.
Select “Save”.
COMAND saves the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
Otherwise, you will see a prompt ask-
ing whether one of the existing num-
bers should be overwritten.
iThe options available under “Options” menu
item 4 depend on which data field 3 is select-
ed. The following options may be available:

Changing a a phone book entry in the mobile
phone (
page 221)

Calling a number saved in an entry
((
page 222)

Saving a phone book entry from mobile
phone in the address book (
page 225)
iYou cannot change address book entries
that come from the phone book in the mobile
phone. iThis function is not possible for phone book
entries in the mobile phone.

ProCarManuals.com

222 Control systems
COMAND address book
Select “Yes” or “No”.
If you select “Yes”, a selection list will
appear containing the four existing
numbers.
Select number to be overwritten.
COMAND overwrites the selected num-
ber with the new data.
Adding to a telephone number data
field
Display the details of an entry and high-
light the telephone number data field
(
page 219).
Select “Options”
“Add Number”.
Select a number category, e.g. “Home”.
Select a telephone category, e.g. “Land
Line”.
Select “Save”.
COMAND adds the data field to the entry if
there are fewer than four numbers as-
signed to the entry in the selected number
category. You can now enter a number into
the data field.
Proceed as described from the “Enter-
ing data into a field” operating step in
the “Creating a new address book en-
try” section (
page 215).
If four numbers are already saved for the
entry in the selected number category, a
prompt will appear asking whether one of
the data fields should be overwritten.
Select “Yes” or “No”.
If you select “Yes”, a selection list will
appear containing the four data fields.
Select field to be overwritten.
COMAND deletes the number of the se-
lected field. You can now enter a new
number into the data field.
Proceed as described from the “Enter-
ing data into a field” operating step in
the “Creating a new address book en-
try” section (
page 215).
Calling a number saved in an entry
Display the details of an entry and high-
light the telephone number data field
(
page 219).
Press n.
or
Select “Options”
“Call”.
In both cases, the telephone* connects
the call. The COMAND display is show-
ing the telephone mode screen.
iOne address book entry may contain up to
four data fields for private telephone numbers
and four data fields for business telephone num-
bers.
This function is not possible for phone book en-
tries in the mobile phone.
iTo do this, COMAND must be equipped with
a telephone*. The mobile phone must be insert-
ed in the cradle*.

ProCarManuals.com

224 Control systems
COMAND address book
If all data is available and matches the dig-
ital map data, the navigation system starts
the route calculation.
Voice entries
Adding or changing a voice entry
Search for the address book entry with
or without a voice entry (
page 217).
Select “Options”
“Voice Name”

“Add” or “Change”.
Subsequent operation is controlled by
voice. Voice Control guides you
through the dialogs.Deleting a voice entry
Search for the address book entry with
a voice entry (
page 217).
Select “Options”
“Voice Name”

“Delete”.
A deletion prompt appears.
Select “Yes” or “No”.
COMAND deletes the voice entry de-
pending on your selection.
Listening to a voice entry
Search for the address book entry with
a voice entry (
page 217).
Select “Options”
“Voice Name”

“Read Aloud”.
You will hear the voice entry.
iIf you have added data, COMAND saves your
additions. This means that you do not need to
re-enter this additional data later on.
The COMAND memory saves the additional data
in a special field, which cannot be displayed. The
data, which you have entered in the address
book initially in the display, remains unchanged.
iFor voice entries, your vehicle must be
equipped with Voice Control. You can not add
voice entries to address book entries that have
been read-in from the phone book of the mobile
phone.
iYou can add one voice entry per address
book entry.

ProCarManuals.com

225 Control systems
COMAND address book
Saving a phone book entry from mobile
phone in the COMAND address book
Saving a phone book entry from mobile
phone as new address book entry
Search for phone book entry in mobile
phone (
page 217).
or
Display details of a phone book entry in
the mobile phone (
page 219).
Select “Options”
“Save”
“New En-
try”.
Select a number category, e.g. “Work”.
Select a telephone category, e.g. “Mo-
bile”.
Select “Save”.
The input menu appears with the data
fields. The name and the telephone
number are entered automatically.
1Data field
2Input mark (cursor)
3Input characters
Proceed as described in the “Changing
a data field” paragraph in the “Creating
a new address book entry” section
(
page 215).Saving a phone book entry from the
mobile phone in an existing address
book entry
Search for a phone book entry in the
mobile phone (
page 217).
or
Display details of a phone book entry in
the mobile phone (
page 219).
Select “Options”
“Save”
“Add”.
Select a number category, e.g. “Home”.
Select a telephone category, e.g. “Land
Line”.
Select “Save”.
The search menu for address book en-
tries appears.
Search for desired entry.
iThe mobile phone must be inserted in the
cradle* and the COMAND have read out the mo-
bile phone book data. This can take several min-
utes, depending on how many entries each
phone book contains.
iThe mobile phone must be inserted in the
cradle*.
ProCarManuals.com

232 Control systems
COMAND system settings
Bluetooth® settings
General information about Bluetooth
®
Bluetooth® technology is the standard for
short-range wireless technologies, suitable
for transmitting voice and data. It is possi-
ble to connect Bluetooth
® devices wire-
lessly. Bluetooth® can be used to
exchange vCards or make calls using a
headset.
Bluetooth
® technology uses the freely
available ISM (Industrial Scientific Medi-
cal) wireless network that works at
2.45 GHz. Ranges of up to ten meters are
possible with Bluetooth
®.
Activate or deactivate Bluetooth
®
Select “Vehicle”
“System Settings”

“Services”
“Deactivate Blue-
tooth”.
You have activated or deactivated
Bluetooth
®. A checkmark appears
when Bluetooth® is deactivated.Connecting Bluetooth
® devices
It is possible to establish a Bluetooth
® con-
nection between COMAND and the follow-
ing types of device:

Mobile phone (only for transferring
business cards)

Headset

Laptop/PDA
You can connect up to twelve devices to
COMAND but only one device can be ac-
tive at a time.
The connection process includes search-
ing for the device and its subsequent au-
thorization.Calling up the Bluetooth
® device list
and searching for devices
Calling up the list: Select “Vehicle”

“System Settings”
“Services”

“Search for Bluetooth devices”.
When you call up the list for the first
time after switching on COMAND, the
search for devices in the reception
range starts automatically. You will see
a display to this effect.
The device list appears after a short
while.
Canceling search:
Select “Cancel”.
The second time you call up the list, and
each time thereafter, the device list ap-
pears immediately if COMAND has not
been switched off and on again in the
meantime.
Starting search manually:
select “Update”.
iTo connect a Bluetooth® device, the
Bluetooth® function must be activated in
COMAND and in the device concerned. The
Bluetooth
® device must also be set to “visible”
or “findable” in order for COMAND to find and
display it. For the setting procedures, please see
the operating instructions for the Bluetooth
®
device.
ProCarManuals.com

258 Control systems
Instrument cluster control system
Menus
Trip (page 260)Navi (page 261)Audio (page 263)Telephone* (page 265)
Commands/submenus
Standard displayShowing route guidance in-
structions, current direction
traveledSelecting radio stationDialing a number from the
phone book
Fuel consumption statistics
since startSelecting satellite radio chan-
nel (USA only)Redialing
Fuel consumption statistics
since the last resetOperating DVD changer/ audio
CD/ audio DVD/MP3Answering a call
Resetting fuel consumption
statisticsEnding a call or rejecting an in-
coming call
Distance to empty
Digital speedometer
ProCarManuals.com