ESP MERCEDES-BENZ CLK COUPE 2004 User Guide

41
Getting started
Driving
6 Press the combination switch in the
direction of arrow 1or2.
The cor responding turn signal indicator
lamp flashes in the instrument cluster.
The combination switch moves back to
its basic position automatically after
large steering wheel movements.
i Press the switch briefly to signal a minor
change in direction. The appropriate turn signal
flashes three times. The combination switch is located on the
left of the steering column.
Com
bination switch
1 Single wipe
2 To switch on the windscreen wipers
6 Make sure that the ignition is switched
on. Switching on the windscre
enwipers
6 Turn the combinatio nswitch to the cor-
re ct setting, depending on how heavy
the rain is.
0 Windscreen wipers off
I Intermittent wipe
II Normal wipe
III Rapid wipe
i Vehicles without a rain sensor*:
The winds cree nw iper s are swi tcheddown a
sp eed automatically when the vehicle is station-
ary. If intermitten twipe has been selecte d,the
wipe interval incre ases.
Ve hicles with arain sensor*:
Yo uc an use position Ias the universal position.
Th erain sensor automatically adjusts wiping fre-
quency depending onhow much rai nfalls on the
wiper sensor.
The rai nsensor is an advanced int elligent int er-
mitt ent function which shoul donlybe activated
wh en it is raining. Werecommend that you do
not acti vate the rai nsensor indry weather as dirt
or ooptical effects may cause inadv ertent wiper
sweeps. Windscreen wipers
P 54.25-3804-31 neu209en_d2.
boo Seite 41Diens tag, 25 .Mai 2004 7:26 19

48 Safety
Occupant safety Do not se
cure any object s with a seat belt if
it is also being used by one of the vehi cle's
occupa nts.
Avoid wearing bulky clothing, e.g. a winter
coat.
Do not rout ethe seat belt strap over sharp-
edged or fragile objects, especially if these
ar e on orinyour cl othing, e.g. spectac les,
pencils or keys.
The belt strap could otherwise tear and you
or other vehicl eoccupa nts could be injured
as aresult.
Onl yone person should use each seat belt
at anyo ne time.
On no account should chil dren travel sitting
on the lap of anotheroccupa nt. It wou ldnot
be possible to restrain the children and they
and other vehicle occupan tscou ldbe seri-
ously injured in the event of abrupt braking
or fatally injured in th eevent of an accident. Persons less than 1.50 m
tall or children
un der twelve years of agecannot wear their
seat belts properly. The yth ere fore require
additio nal restraint systems installed on
suitable vehicle seats for protection in an
accident. Always observe the installation
instructions issued by the manufactu rer of
the child re straint systems. G
Risk of injury The seat belt onl
yprovides its intended
degree of protection if the seat bac krest is
positioned as close to the vertical as possi-
ble, allowing the occupant to sit upright.
Avoid seat positions that do not allow the
seat belt to be routed correctly. To do so,
position the backrest as close to th evertical
as possible. Never drive with the backrest
recli ned too far back. You could otherwise
be serio uslyor even fatally injured in the
event of an accident or abrupt bra king. G
Risk ofinjury The seat belt cannot perform its protective
function
correctly if the seat belt strap or
buckle are dirty or damaged. For this rea-
son, keep the seat belt strap and buckle
clean, otherwise the belt tongu eca nnot
engage correctly.
Chec kthe seat belts regularly that they:
! arenot damag ed
! are not routed over sharp edges
! are not trapped
The seat belt strap could oth erwi se tear in
an accident.
Yo u or ot hers could be seriously or fatally
injured.
Have seat belts replaced and their anchor-
ages checked if the belts have been dam-
age dors ubjected to a heavyloa din an
accid ent.
For safety reasons, Mercedes-Benz recom-
mends that you only use seat belts which
have been specially approved for your vehi-
cl e by Mercedes-Be nz.209en_d2.boo Seite
48Diens tag, 25 .Mai 2004 7:26 19

53
Safety
Occupant safety Ai
rb ag syst em G
Risk ofinjury If the belt tensi
onersha ve bee ntriggered,
have them replaced ata qualified specialist
workshop which has th eneces sary special-
ist knowledge and tools to carry out the
work required. Mercedes -Benz recommends
that you use a Mercedes-Be nzService
Centre for this purpose.
In particular, work rele vant to safety or on
safe ty-re lated systems mustbe carried out
at a qualified spec ialist workshop.
Ob serve the safety regulations for th edis-
posal of belt tensioners. Any Mercedes-B enz
Service Centre can provide detail sof these
regulations. G
Risk of injury To reduce the risk of serious or fata
linjury in
an accident with a high rate of deceleration,
e.g. injuries caused by an airbaginflating
within milliseconds or in the ev ent of abrupt
br aking, please observe the following
inst ructions:
! Allve hicle occupants must select a seat
position in which it is possible to wear
the seat belt correctl ybut which is as far
back from the airba gas possible. The
position of the driver's seat must allow
the driver to drive th evehicle safely. The
driver's arms shou ldbe slightly bent
when holding the steering wheel. The
distance from th edriver's seat to the
pedals must be such that the dr iver can
fully depress the pedals.
! Vehicle occupants should wear their
seat belt correctly at all times and lean
back against the bac krest, which should
be positioned almost vertically. The
head restraint should support the back
of yo urhead at abo uteye level. !
Move the front- passenger seat as far to
the rear as possible, especially if a child
is secured in a restraint system installed
on this sea t.
! Never secure a rearward-facing child
restraint system on the front-pass enger
seat if the front-passenger front airbag
is not deactivate d.In the CLK-Class, the
fr ont-passen ger fro ntairbag is deacti-
vated if a child restraint system with
automatic child seat recognition is
secured to a front-passenger seat and
the AIRBAG OFF lamp is lit. If the auto-
matic child seat rec ognition is defective,
children must be secured in a child
restraint system ins talled on a suitable
re ar seat. If you are using aforward-f ac-
in g child seat on the fro nt-pa ssen ger
seat, the front-passenger seat must be
moved as far to the rear as possibl e. 209en_d2.boo Seite
53Diens tag, 25 .Mai 2004 7:26 19

55
Safety
Occupant safety
Front airbags
The front airbags increase the protection
afforded to the driver and front passenger
against head and chest in juries. The
driver's front airbag and front-passenger
front airbag are triggered:
! inthe first stages of an accident with
high forces of vehicle deceleration or
acceleration in a longi tudinal direction
! ifthe system foresees that airbag
deployment can offer additional pro-
tection to that provided by the seat belt !
depending on the use of the seat belt
! independently of other airbags in the
vehicle
! rarely if the vehicle overturns, unless
high forces of vehicle deceleration in a
long itudinal direction are detected
The dri ver's front airbag is located inthe
steering wheel. The front-passenge rfront
airbag is fitted above the glove compart-
ment.
Front airbags
1 Driver's front airbag
2 Front-passenger front airbag G
Risk ofinjury Af
ter an airbag has bee ntriggered:
! airbag parts are hot. Do not touch them,
oth erwi se you could be burnt
! have the airbags replaced at a qualified
specialist workshop whic hhas the nec-
essary specialist knowledge and tools to
carry out the work required. Mercedes-
Ben zrecom mends that you use a
Mercedes -Benz Serv ice Centre for
this purpose. Inparticular, work rele-
vant to safety or on safety-relate dsys-
tems must be carried out at a qualified
specialist workshop G
Risk of injury A small
amount of finepowder is released as
an airbag inflates. Thi spowder does not
constitute a health hazard, nor does it imply
that fire has brok enout in the vehicle. This
po wder could cause short-term breathing
dif ficu lties for persons suffering from
as thma or oth errespiratory conditions. In
order to prev ent these breathing difficulties,
leave the vehicle immediately when you are
certain it is safe to do so or open the win-
do ws to allow fresh air to enter the ve hicle.
P91.60-2392-31 209en_d2.boo Seite
55Diens tag, 25 .Mai 2004 7:26 19

68 Safety
Driving safety
systems
In this section, you will find information
about the following driving safety system s:
! ABS(A nti-lock B raking S ystem)
! BAS (B rake As sist)
! ESP (E lectronic S tability P rogram)
i In wintry conditions, use winter tyres (M+S
tyres), with snow chains if ne cessary. The maxi-
mu m effect of ABS, BAS, ESP and SBC can only
be ac hievedin this way. ABS regulates the brake
pressure insuch a
way that the wheels do not lock when you
brake. This allows you to continue steer-
ing.
ABS works from a speed of approxi mately
8 km /hupwards, regardless of road sur-
face conditions.
ABS works on slip pery road surfaces, even
when you only brake gent ly.
The - indicator lamp in the instrument
cluster ( =page 12 )light s up when you
turn the keyto position 2in the ignition
lock. It goes out when the engine isrun-
ning. This indicates that ABS is opera-
tional. Dr
iving safety systems G
Risk of accident The risk of an acci
dent increases especially if
you:
! drive too fast, particularly when cornering
and ona wet or slippery road surfa ce
! drive too close to th evehicle in front
The driving safety systems described in this
section are unable to reduce this risk or over-
ride the laws of physics.
For this reason, always adapt your driving
style to suit the current road and weather con-
ditions and maintain asuffici en tdistanc efrom
other road users and objectsonthe road. ABS
G
Risk of accident Do not depress the brake pedal several times
in
qu ick succession (pumping). Depress the
brake firmly and evenly .Pumping the brake
ped alreduces the braking effect. 209en_d2.boo Seite
68Diens tag, 25 .Mai 2004 7:26 19

69
Safety
Driving safety systems Braking
If ABS cuts in while you are braking, you
will feel:
!
the vehicle vibrating
! the brake pedal pulsating
This will indicate to you that ABS has been
acti vated. Always adapt your driving style
to suit the prevai ling road and weather
conditions.
6 Continue to depress the brake pedal,
even when ABS has been activ ated. Brake Assist operates
inemergency brak-
ing situation s.If you depress the brake
pedal quickly, BAS boosts the braking
force automatically and thus shortens the
stopping distance.
6 Depress the brake pedal firm lyuntil the
emergency-braking situation is ove r.
ABS prevents the wheels from locking.
When you release the brake pedal, the
brakes work as norm al again. BAS is then
deactivated. The Electronic Stabilit
y Program monitors
the traction, i.e. the power transmission
between the tyres and the road, and the
stability of the vehicle.
ESP detects when a wheel is spinning or
when the vehicle has begun to skid. ESP
stabilises the vehicle by applying specific
braking to individual wheels and limiting
the engine power output. ESP assists you
in particular when pulling away on a wet or
slip pery road surface.
If ESP cuts in, the vwarning lamp
flashes in the speedometer.
The v ESP warning lamp in the instru-
ment cluster lights up when you turn the
key to po sition 2in the ignition lock. It
goes out when the engine is running. This
ind icates that ESP is operational. G
Risk of accident Always adapt your driving style to suit the
prevailin
groad and weather conditions and
maintain a suffi cient distance from other
road users and objects onthe road. BAS
G
Risk of accident If BAS malfunctions, the brake system is still
available with the full brake boosting effect.
In an emer
gency braking situation, however,
th e braking fo rce is not automatically
bo osted and may lengthen the stopping dis-
tance. ESP209en_d2.boo Seite
69Diens tag, 25 .Mai 2004 7:26 19

70 Safety
Driving safety
systems
! ESP only functions prop erly if whe els with
the recommended tyre sizes are used
( =
page 399).
The engine must not be running if:
! the parking brake is being teste dusing a
dynamometer
! the vehicle is being towed with the front axle
ra ised
Appli cation of the brakes by ESP may otherw ise
des troy the braking system on therear axl e. i
Only use wheels with the recommended tyre
si zes. Only then wil lESP function properly. Activating
/deactivating ESP
It may be best to deactivate ESP in the
following situations:
! if snow chains are being used
! in deep snow
! on sand or gra vel When you deactivate ESP:
! ESP no longer improves driving stability
! the engine's torque isthen no longer
limited and the drive wheels could spin.
This res ults in a cutting action ofthe
spinning wheels for better grip
! traction control is still activated
! you can still brake with support from
ESP
i Thev warning lamp in the instrument
clus ter flashes if ESP isdeactivated and one or
mor ewhe els start to spin. ESP doe snot then sta-
bil ise the vehic le. G
Risk of accident Proceed as follows if the
vwarning lamp
in the speedometer flashes:
! under no circumsta nces should you
de activate ESP
! onlydepress the accelerator pedal as
far as necessary when pulling away
! donot keep your foot onthe ac celerator
while you are driv ing
! adapt your driving sty leto suit the road
and weather conditions
Otherwise ,the vehicle could begin toskid.
ESP cannot reduce the risk of an accident if
you drive too fast. G
Riskofaccident Activate ESP as soon as th
esituations
described above no longer apply. ESP will
ot he rwi sebe unable to stabilise the vehicle
if the vehicle starts to skid or when a wheel
spins. 209en_d2.
boo Seite 70Diens tag, 25 .Mai 2004 7:26 19

71
Safety
Driving safety systems
Deactivating ESP
The button islocated on the centre con-
sole.
1 To ac tivate /deactivate ESP
6 Press and hold button 1until the
v warning lamp in the instrument
cluster comes on.
ESP is deactivated. Ac
tivating ESP
6 Press button 1.
The v warning lamp in the instru-
ment cluster goes out.
ESP is react ivat ed.
P54.25-3805-31 G
Risk of accident ES
Pis deactivated if the vwarning lamp
in th e instrument cluster lights up continu-
ously when the engine is running .The risk of
you r vehicle skidding is then increased in
certa insituations.
Always adapt your driving style to suit the
pr evailing road and weather conditions. 209en_d2.boo Seite
71Diens tag, 25 .Mai 2004 7:26 19

97
Controls in detail
Storing settings* (memory package)
You can store up to three different settings
for each key using the memory function.
With KEYLESS GO*, it is possib leto store a
furthe r three settings for both KEYLESS
GO keys* together. Thes ethree settings
are activated for each KEYLESS GO key* if
you operate the vehicle us ing KE YLESS
GO*.
The following settings are stored:
! Seat, backrest and head restraint
pos ition
! Driver's side: steering wheel position
! Driver's side: exterior mirror position
i Each additional key has the same settings as
KE YLESS GO*. You can deactivate key-dependent set-
tings using the operating system
(=
pag e130).
The memory button and storage position
sw itch are located in the door control
panel.
1 Mmemory button
2 Storage positions 1, 2, 3 6
Make sure that:
! the ignition is switched on
or ! the respective door is open
6 Adjust the seat.
6 On the driver's side, also adjust the
steering wheel and the mirrors
(=
page 25).
6 Turn storage position switch 2to the
required memory position 1, 2or3.
6 Pres s the Mmemory button.
6 Pres s the storage position switch
wi thin three seconds.
The settings are stored in this storage
position. Storing settings* (memory package)
G
Risk of accident Only
call up the memory functions onthe
driver's side when the vehicle is stationary.
You could otherwise be distracted inthe
event of an unexpected steering wheel and
seat move ment. P
54.25-2600-31 neu Storing209en_d2.boo Seite
97Diens tag, 25 .Mai 2004 7:26 19

101
Controls in detail
Lighting
6 Turn the light switch to U.
The side lamps are sw itched on /off
automatically when the key is in posi-
tion 1in the ignition lock (
=page 23). The dipped-beam headlamps, side
la
mps and licence plate lightin gare
switched on /off automatically when
the eng ine is running. Fr
ont foglamp s/rear foglamp
i When the light switch is set to U, you
ca nnot switch on the front or rear foglamps. To
swit chon the front foglamps, you must first turn
th e light switch to B. Switchi
ngon th e front foglamps
6 Make sure that the Bdipped-beam
headlamps are switched on.
6 Pull the light switch to the first stop.
The green ‡indicator lamp nextto
the switch lights up.
Switching on the rear foglamp 6 Make sure that the Bdipped-beam
headlamps are switched on.
6 Pull the light swi tch to the second stop.
The yellow †indicator lamp next to
the switch lights up. G
Risk of accident If the light switch is set to
U:
! theheadlamps could automatically
switch of ftemporarily as a consequen ce
of strong glare (e.g. fro mon comi ng traf-
fic).
! the lights do not switch on automatically
in foggy conditions.
Set the light switch to Bingood time.
You will otherwise endanger yourself and
others.
For this reason ,only move the light switch
from U toB when it is dark if the
vehicle is stationary. You could otherwise
cause an accident if the headlamps were to
switch off temporarily.
The automatic headlamp fe ature is onlyan
aid. You are responsible for the vehic le's
lighting at all times. G
Risk of accident Set the light switch:
!
from U toB when it is dark only
if the vehicle is stationary
! toB before dri ving in what you
expect to be foggy cond itions
You could otherwise cause an accident if the
he adlamps were to switch off temporarily. 209en_d2.boo Seite
101 Dienstag, 25. Mai 2004 7:26 19