turn signal bulb MERCEDES-BENZ CLK COUPE 2004 Owners Manual

299
Practical advice
Display messag esDisplay messages Possible cause
/consequ ence Possible sol
ution .Display faulty
Visit workshop! The lighting display has failed. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre.
Turn signal , rear left
Back-up lamp on! The
rear left tu rnsign alisfau lty. An-
other lamp has taken over this func-
tion. 6
Change the bulb as soon as possible.
Turn signal , rear right
Back-up lamp on! The rear right turn signal is
faulty.
Another lamp has taken over this
function. 6
Change the bulb as soon as possible.
Turn signal in left
mirror The left turn signal in the exterior
mirror is faulty. This message only
appears if all light emitting diodes
have blown. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre.
Turn signal in right
mirror The rig
htturn signal in the exterior
mirror is faulty. This message only
appears if al llight emitting diodes
have blown. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre. 209en_d2.boo Seite
299 Dienstag, 25. Mai 2004 7:26 19

357
Practical advice
Changing bulbs
Bulbs and lamps constitute an important
aspect of vehicle safety. You must there-
fore make sure that all bulbs are in working
order at all times. i
If one of the following bulbs blows, another
bul bw ill ta ke over its function:
! Turn signals
! Brake lamps
! Side lamps
! Tail lamps Fro
ntbulbs Rea
rbulbs
1D 2S-35 W bulbs are requir edfor vehicles with
xenon headlamps*. You mus tnot change xenon
bulbs yourself.
2T he rear foglamp is only activated on thedriver's
side. Changing
bulbs P 54.00-2291-31 Bulb Type
1 Ad
ditional turn sig-
nal LEDs
2 Dipped-beam
headlamps
1 H7 55 W
3 Turn
signals PY
21 W 4 Main-beam head-
lamps H7 55 W
Parking lamps R 5 W
5 Front foglamps /
turning lamps HB4
55 W Bulb Type
6 Third brake lamp LEDs
7 Re
ar foglamp /tail
lamps 2 P 21
/4 W Tail and parking
lamps R 5 W
Re
versing lamps P 21 W
Br
ak e lamps P 21 W
Turn signals P 21 W
8 Licence plate light-
ing C 5 W209en_d2.boo Seite
357 Dienstag, 25. Mai 2004 7:26 19

359
Practical advice
Changing bulbs
Left headlamp, mirro rim age ofright
1 Housing cover for dipped-beam
headlamp /xenon headl amp
2 Housing cover for main-beam hea d-
lamp 3
Bulb holder for turn signal
4 Bulbholder for dipped-beam headlamp
5 Bulbholder for main-beam headlamp
6 Side lamps and parking lamps Changing the front turn signal lamps
6
Switch off the lights.
6 Open the bonnet ( =pa ge 244).
6 Turn bulb holder 3anti-clockwise
along with the bulb and remove the
holder.
6 Press the bulb in, turn it ant i-clockwise
and remove it from the holder. Ch
angi ngthe fron t bulb s P 82.10-2905-31 G
Risk of injury Vehicles with bi-xenon bulbs*:
Do not remove housing cover
1for the xe-
non bulb. Xenonbulbscarry ahigh vo lta ge.
Do not cha nge the xenon bulbs yourself. You
should have them changed at a qualified
specialist workshop which has the neces-
sary specialist knowledge and tools to carry
out the work required. Mercede s-Benz rec-
omm ends that you use a Merc edes-Benz
Service Centre for this purpose. In particu-
la r, work relevant to safety or on safety-
related systems must be carried out at a
qu alified specialist workshop. P 82.10-2906-31
==209en_d2.boo Seite
359 Dienstag, 25. Mai 2004 7:26 19

361
Practical advice
Changing bulbs Tail
lamp cl uster
Left bul bholder, mirror image of right
1 Brake lam ps
2 Turn signals
3 Reversing lamps
4 Side lamps
5 Rear fogl amp/ tail lamps 6
Switch off the lig hts.
6 Open the boot lid ( =page 84).
6 Roll the trim located in the area of the
appropriate tail lamp cluster to the
side.
6 Squeeze the reta ining clips and remove
the bul bholder along with the bulb.
6 Turn the bulb anti-clockwise and
remove it from the hol der.
6 Insert the new bulb into the holder and
turn it clockwise.
6 Replace the bulb holder. Make sure
that you hear the bul bhol der engage in
the retaining clips.
6 Roll the tri mback again. 1
Screws
6 Switch off the lights.
6 Undo the two screws and remove the
lamp unit.
6 Change the bulb and refit the la mpunit.
6 Screw the two screws back in. Ch
anging the rear bulbs P 82.10-2907-31 neu Licence plate
lighti ng P 82.10-2913-31209en
_d2.boo Seite 361 Dienstag, 25. Mai 2004 7:26 19