turn signal bulb MERCEDES-BENZ CLK500 2006 C209 Owner's Manual

407 Practical hints
What to do if …?
Display symbol
Display message
Possible cause/consequence
Possible solution
.
Side marker lamp
front left
The front left side marker lamp is malfunc-
tioning.

Visit an authorized Mercedes-Benz
Center as soon as possible.
Side marker lamp
front right
The front right side marker lamp is mal-
functioning.

Visit an authorized Mercedes-Benz
Center as soon as possible.
Tail lamp left
back-up lamp on

The left tail lamp is malfunctioning. A
back-up bulb is being used.

Visit an authorized Mercedes-Benz
Center as soon as possible.
Tail lamp right
back-up lamp on

The right tail lamp is malfunctioning. A
back-up bulb is being used.

Visit an authorized Mercedes-Benz
Center as soon as possible.
Turn off lamps
Lamps have been turned on although the
SmartKey in the starter switch is in posi-
tion 0.

Turn off the headlamps.
Turn signal,
front left
The left front turn signal lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
Turn signal,
front right

The right front turn signal lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
Turn signal,
left mirror
The left turn signal in the side mirror is
malfunctioning. This message will only ap-
pear if all light emitting diodes have
stopped working.

Have the LEDs replaced as soon as
possible.

408 Practical hintsWhat to do if …?Display symbol
Display message
Possible cause/consequence
Possible solution
.
Turn signal,
right mirror
The right turn signal in the side mirror is
malfunctioning. This message will only ap-
pear if all light emitting diodes have
stopped working.

Have the LEDs replaced as soon as
possible.
Turn signal rear left
back-up lamp on

The left rear turn signal lamp is malfunc-
tioning. A back-up bulb is being used.

Replace the bulb as soon as possible.
Turn signal rear right
back-up lamp on

The right rear turn signal lamp is malfunc-
tioning. A back-up bulb is being used.

Replace the bulb as soon as possible.
Please engage
roll-over bar
The roll bar is malfunctioning.

Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Please release
roll-over bar
The roll bar is malfunctioning.

Operate the roll bars manually
(page 423).

Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.

438 Practical hintsReplacing bulbsSafe vehicle operation depends on proper
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp
assemblies are in good working order at all
times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. See an authorized
Mercedes-Benz Center for headlamp
adjustment.
Bulbs Front lamps
iIf the headlamps or front fog lamps are
fogged up on the inside as a result of
high humidity, driving the vehicle a
distance with the lights on should clear
up the fogging.iBack-up bulbs will be brought into use
when lamps malfunction. Observe the
messages in the multifunction display
(page 404).
Lamp
Type
1
Additional turn signal
lamp
LED
2
Turn signal lamp
1156 NA
3
Halogen headlamp:
Low beam
Bi-Xenon* headlamp:
Low and high beam
1
1Vehicles with Bi-Xenon headlamps* do not replace
the Bi-Xenon bulbs yourself.
H7 (55 W)
D2S-35 W
4
Halogen headlamp:
High beam/high beam
flasher
Bi-Xenon* headlamp:
High beam flasher
H7 (55 W)
H7 (55 W)
Parking and standing
lamp
W 5 W
5
Front fog lamp
Corner-illuminating
front fog lamp*
HB4 (51 W)
H7 (55 W)
6
Side marker lamp
W 5 W

439 Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement


Only use 12 volt bulbs of the same type
and with the specified watt rating.


Switch lights off before changing a bulb
to prevent short circuits.


Always use a clean lint-free cloth when
handling bulbs.


Your hands should be dry and free of oil
and grease.


If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center.


Additional turn signal lamps in the exte-
rior rear view mirrors


High mounted brake lamp


Bi-Xenon* lamps


Front fog lamps


Front side marker lamps
Lamp
Type
7
High mounted brake
lamp
LED
8
Brake lamp
P 21 W
9
Turn signal lamp
P 21 W
a
Tail, parking and stand-
ing lamp, side marker
P 21/4 W
W 5 W
b
Backup lamp
P 21 W
c
License plate lamps
C 5 W
d
Rear fog lamp, driver’s
side
P 21/4 W
Warning!
G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas. A
bulb can explode if you:

touch or move it when hot


drop the bulb


scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.iHave the headlamp adjustment
checked regularly.

440 Practical hintsReplacing bulbsReplacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 127).

Open the hood (
page 321).
Front lamps halogen-type
1Housing cover for low beam headlamp
2Housing cover for high beam head-
lamp, parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb holder of low beam bulb
5Bulb holder of high beam bulb
6Bulb socket for parking and standing
lamp bulb
Low beam bulb

Turn housing cover1 counterclock-
wise and remove it.

Turn bulb holder4 with the bulb coun-
terclockwise and remove it.

Pull the bulb at its socket out of bulb
holder4.

Insert the new bulb so that its socket
locates in the recess of bulb holder4
and is level to it.

Reinsert bulb holder4 with the bulb in
the lamp and turn clockwise.

Align housing cover1 and turn it
clockwise.
High beam bulb

Turn housing cover2 counterclock-
wise and remove it.

Turn bulb holder5 with the bulb coun-
terclockwise and remove it.

Pull the bulb at its socket out of bulb
holder5.

Insert the new bulb so that its socket
locates in the recess of bulb holder5
and is level to it.

Reinsert bulb holder5 with the bulb in
the lamp and turn clockwise.

Align housing cover2 and turn it
clockwise.

441 Practical hints
Replacing bulbs
Front turn signal lamp bulb
Turn bulb socket3 counterclockwise
and remove it.

Press gently onto the bulb and turn
counterclockwise out of bulb
socket3.

Press the new bulb gently into bulb
socket3 and turn clockwise until it
engages.

Place bulb socket3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb

Turn housing cover2 counterclock-
wise and remove it.

Pull out bulb socket6 with the bulb.

Pull the bulb out of the bulb socket6.

Press the new bulb into bulb socket6.

Press bulb socket6 back into the
lamp.

Align housing cover2 and turn it
clockwise.Front lamps Bi-Xenon*-type
1Bulb socket for turn signal lamp
2Housing cover for high beam flasher,
parking and standing lamp
3Housing cover for Bi-Xenon* headlamp4Bulb holder for high beam flasher bulb
5Bulb socket for parking and standing
lamp bulb
Warning!
G
Do not remove the cover
3
for the Bi-Xe-
non* headlamp. Because of high voltage in
xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.

442 Practical hintsReplacing bulbsHigh beam bulb for high beam flasher
Turn housing cover2 counterclock-
wise and remove it.

Turn bulb holder4 with the bulb coun-
terclockwise and remove it.

Pull the bulb at its socket out of bulb
holder4.

Insert the new bulb so that its socket
locates in the recess of bulb holder4
and is level to it.

Reinsert bulb holder4 with the bulb in
the lamp and turn clockwise.

Align housing cover2 and turn it
clockwise.Front turn signal lamp bulb

Turn bulb socket1 counterclockwise
and remove it.

Press gently onto the bulb and turn
counterclockwise out of bulb
socket1.

Press the new bulb gently into bulb
socket1 and turn clockwise until it
engages.

Place bulb socket1 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb

Turn housing cover2 counterclock-
wise and remove it.

Pull out bulb socket5 with the bulb.

Pull the bulb out of the bulb socket5.

Press the new bulb into bulb socket5.

Press bulb socket5 back into the
lamp.

Align housing cover2 and turn it
clockwise.Additional turn signal lamps
The additional turn signal lamps in the ex-
terior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the additional turn signal unit
replaced by an authorized Mercedes-Benz
Center.
Front side marker lamp
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.

443 Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 127).
Tail lamp unit

Open trunk lid.

Swing the trim panel covering the cor-
responding rear lights to the side.
1Connector
2Tab

Disconnect electrical connector1.

Pull tab2 in the direction of the ar-
row.

Remove the bulb carrier.

Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.

Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
1Brake lamp
2Turn signal lamp
3Backup lamp
4Standing and side marker lamp
5Rear fog lamp (driver’s side)/tail

Reinstall the bulb carrier.
Let tab2 engage.

Connect the electrical connector1
until it engage.

Reinstall trim panel.
License plate lamp
1Screws

Loosen both screws1.

Remove the license plate lamp.

Replace the tubular lamp.

Reinstall the license plate lamp.

Retighten the screws1.

502 Index
Fuel reserve 25, 379
High beam headlamp 25
Instrument cluster 374–380
Low beam headlamp 25
Maintenance service 361
Parktronic system*
warning indicators 271
Roll bar 379
Seat belt telltale 25, 71, 379
Seat belts 379
SRS 25, 63, 380
Turn signals 25
Language, Setting 151
LATCH-type child seat anchors see
Children in the vehicle
License plate lamps
Messages in display 405
Replacing bulbs 439, 443
Light alloy wheels, cleaning 370
Light sensor see Lamp sensor
Lighter see Cigarette lighter
Lighting, Exterior and interior 127
Limp Home Mode 180
Loading
Ski sack* (Canada only) 273
Loading see Vehicle loadingLoading the vehicle 333
Locator lighting 129, 157
Lock buttons
Door handle (KEYLESS-GO*) 60, 104
Trunk lid (KEYLESS-GO*) 106
Lock knob 489
Locking 60
Loss of keys 100, 106
Loss of Service and
Warranty Information Booklet 467
Low beam headlamps
Indicator lamp 25
Messages in display 406
Replacing bulbs (Bi-Xenon*) 438
Replacing bulbs (Halogen) 438, 440
Switching on 52
Lubricants 479
Luggage cover 262
Folding back 273
M
Maintenance 12, 361
Calling up service indicator 362
Clearing service indicator 362
FSS (Canada vehicles) 361
Maintenance System
(U.S. vehicles) 361Resetting service indicator 363
Service indicator 361
Service term exceeded 362
Maintenance system
(U.S. vehicles) 361, 489
Manual headlamp mode see Headlamps
Manual shift program 178
MAXCOOL maximum cooling 202
Maximum load rating, Tires 356
Maximum loaded vehicle weight,
Tire inflation pressure 356
Maximum tire inflation pressure 356
Mechanical key 419
Memory function see Seats, Power
Menus see Control system menus
Microphone, Hands-free 29
Minispare wheel see Spare wheel
Mirrors
Adjusting 43
Antiglare position 181
Auto-dimming 182
Exterior rear view mirrors 43
Parking position 126, 161, 183
Interior rear view mirror 43
MOE see MOExtended
MOE tires see MOExtended system*

505 Index
Passenger safety see Occupant safety
Pedals 307
Phone see Telephone
Plastic and rubber parts, Cleaning 371
Poly-V-belt drive 490
Layout 469
Positions (Memory function) see
Seats, Power
Power assistance 307
Power seat see Seats, Power
Power train 490
Power washer 365
Power windows 249
Cleaning 370
Convenience closing feature 253
Express opening/closing 251
Opening with soft top switch 254
Operating 249
Rear side windows,
Blocking operation 85
Summer opening feature 252
Synchronizing 251
Practical hints 373
Premium unleaded gasoline 482
Problems
While driving 56With vehicle 17
Product information 9
Production options weight 356
Program mode
Automatic shift program 172
Manual shift program 178
Program mode
selector switch 172, 178, 490
PSI 356
R
Radio
Operation 217
Selecting stations 145
Selecting stations (satellite*) 145
Radio transmitters 315
Range (distance to empty) 163
Reading lamp 29, 135
Rear fog lamp see Fog lamps
Rear lamps see Tail lamps
Rear seat ashtray see Ashtrays
Rear seat head restraints see
Head restraints
Rear side windows
Blocking operation 85
Rear side-impact air bags* 68
Rear view mirrors see MirrorsRear window defroster 185
Recommended
engine oils and oil filter 481
Recommended
tire inflation pressure 356
Recovery services,
Stolen vehicle (Tele Aid) 296
Refrigerant, Air conditioning 481
Refueling 318
Regular checks 320
Reminder, Seat belt see Seat belts, Telltale
Remote control
SmartKey 96, 100
SmartKey with KEYLESS-GO* 100
Remote door unlock (Tele Aid) 295
Removing
Ski sack* (Canada only) 276
Replacing bulbs 438
Additional turn signals 438, 439
Backup lamps 439, 443
Brake lamps 439, 443
Corner-illuminating
front fog lamps* 438, 439
Fog lamps 438, 439, 443
Headlamp bulbs 440
Headlamps 438