phone MERCEDES-BENZ CLS 2014 User Guide

Text fieldshows the selected menu or
submenu as well as display messages.
The following messages may appear in the
multifunction display:
\nShift recommendation (Ypage 161)
 Active Parking Assist (Ypage 196)
Adaptive Highbeam Assist
(Ypage 122)
ECO start/stop function
(Ypage 150)
HOLD function (Ypage 186)
Menus and submenus
Menu overview
Press the\norbutton on the
steeringwheel to call up the menu bar and
selectamenu.
Operating the on-board computer
(Ypage 220).
Dependingonthe equipment installed in the
vehicle, you can call up the following menus:
RTripmenu (Ypage 222)
RNavimenu (navigation instructions)
(Ypage 224)
RAudiomenu (Ypage 225)
RTelmenu (telephone) (Ypage 226)
RDriveAssistmenu (assistance)
(Ypage 227)
RServ.menu (Ypage 229)
RSettingsmenu (settings) (Ypage 229)
RAMGmenu in AMG vehicles (Ypage 234)
Trip menu
Standard display
XPress and hold thebutton on the
steeringwheel until theTripmenu with
trip odometerand odometeris
shown.
Trip computer "From Start" or "From
Reset"
Example: trip computer "From Start"
Distance
Time
$Average speed
!Average fuel consumption
XPress the\norbutton on the
steeringwheel to select theTripmenu.
XPressorto selectFrom Start
orFrom Reset.
The values in theFrom Startsubmenu are
calculated from the start ofajourney whilst
the values in theFrom Resetsubmenu are
calculated from the last time the submenu
was reset (Ypage 223).
TheFrom Starttrip computer is
automatically reset when:
Rthe ignition has been switched off for more
than four hours.
R999 hours have been exceeded.
R9,999 miles have been exceeded.
222Menus and submenus
On-board computer and displays

VideoDVD operation
Example:CD/DVD changerdisplay
Currentscene
XSwitch on COMANDand select video DVD;
see the separate operating instructions.
XPress the\norbutton on the
steering wheeltoselect theAudiomenu.
XTo select the next/previous scene:
brieflypress theorbutton.
XTo selectascene from thescene list
(rapid scrolling):press and hold the
orbuttonuntil desired
scenehasbeenreached.
Telephonemenu
Introduction
GWARNING
If youoperate informationsystems and
communication equipmentintegratedin the
vehiclewhile driving, you will be distracted
from traffic conditions. You could also lose
control of thevehicle. There isariskofan
accident.
Only operate theequipmentwhen the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the
equipment when the vehicle is stationary.
When telephoning, you must observe the
legal requirements for the countryinwhich
you are currently driving.
XSwitch on the mobile phone (see the
separate operating instructions).
XSwitch on COMAND (see the separate
operating instructions).
XEstablishaBluetooth®connection to
COMAND; see the separate operating
instructions.
XPress the\norbutton on the
steering wheel to select theTelmenu.
You will see one of the following display
messages in the multifunction display:
RPhone READYor the name of the network
provider: the mobile phone has found a
network and is ready to receive.
RPhone No Service:there is no network
available or the mobile phone is searching
foranetwork.
Acceptingacall
Example: incoming call
XPress thebutton on the steering
wheel to acceptanincoming call.
If someone calls youwhenyouareinthe
Telmenu,adisplay message appearsinthe
multifunctiondisplay.
You can acceptacall even if you are not in
theTelmenu.
Rejecting or endingacall
XPress thebutton on the steering
wheel.
You can end or rejectacall even if you are not
in theTelmenu.
Dialinganumberfrom the phone book
XPress the\norbutton on the
steering wheel to select theTelmenu.
XPress the,orbutton to
switch to the phone book.
226Menus and submenus
On-board computer and displays

XPress theorbutton to select the
desired name.
or
XTo begin rapid scrolling:press and hold
theorbutton for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
XIf only one telephone number is stored
foraname:press theorbutton
to start dialing.
or
XIf thereismore thanone number for a
particular name:press theor
button to display the numbers.
XPress theorbutton to select the
number you want to dial.
XPress theorbutton to start
dialing.
or
XTo exit the telephone book:press the
orbutton.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
XPress the\norbutton on the
steeringwheel to select theTelmenu.
XPress thebutton to switch to the
redial memory.
XPress theorbutton to select the
desired name or number.
XPress theorbutton to start
dialing.
or
XTo exit the redial memory:press the
orbutton.
Assistance menu
Introduction
In theDriveAssistmenu, you have the
following options:
RDisplaying the assistancegraphic
(Ypage 227)
RActivating/deactivating
ESP®(Ypage 227)
RActivating/deactivating PRE-SAFE®Brake
(Ypage 228)
RActivating/deactivating ATTENTION
ASSIST (Ypage 228)
RActivating/deactivating Blind Spot Assist
or Active Blind Spot Assist (Ypage 228)
RActivating/deactivating Lane Keeping
Assist or Active Lane Keeping Assist
(Ypage 229)
Displaying the assistance graphic
XPress the\norbutton on the
steeringwheel to select theDriveAssist
menu.
XPress theorbutton to select
Assist. Graphic.
XPress thebutton.
The DISTRONIC PLUS assistancegraphic
appears in the multifunction display
(Ypage 184).
Deactivating/activating ESP®
iObserve the "Importantsafetynotes"
sectioninthedescription of ESP
(Ypage 68).
Menusand submenus227
On-boar dc omputer and displays
Z

Display messagesPossible causes/consequences andSolutions

Power Steering
Malfunction See
Operator'sManual
The powersteering is malfunctioning.
Awarning tone also sounds.
GWARNING
You will need to use moreforce to steer.
Thereisariskofanaccident.
XCheck whetheryou are able to apply the extraforce required.
XIf you are able to steer safely:carefully drive on toaqualified
specialist workshop.
XIf you are unable to steer safely:do not drive on. Contact the
nearest qualified specialist workshop.
Phone No ServiceYour vehicle is outside the network provider's transmitter/
receiver range.
XWait until the mobile phone operational readiness symbol
appears in the multifunction display.

Check Washer Fluid
The washer fluid level in the washer fluid reservoir has dropped
below the minimum.
XAdd washer fluid (Ypage 309).
SmartKey
Display messagesPossible causes/consequences andSolutions

Key Does Not
Belong to Vehicle
You have put the wrong SmartKey in the ignition lock.
XUse the correctSmartKey.

TakeYourKeyfrom
Ignition
The SmartKey is in the ignition lock.
XRemove the SmartKey.

ObtainaNew Key
The SmartKey needs to be replaced.
XVisitaqualified specialist workshop.

ReplaceKeyBattery
The batteries of the KEYLESS-GO key are discharged.
XChange the batteries (Ypage 79).
262Display messages
On-board computer and displays

AMG vehicles
Your attention must always be focused on the
traffic conditions. Only usethe cigarette
lighterwhen road and traffic conditions
permit.
XTurn the SmartKey to position2in the
ignition lock (Ypage 147).
XTo open:briefly press the trim on
cover.
The stowage compartmentopens.
XPress in cigarette lighter.
Cigarettelighterwill pop out
automatically when the heatingelementis
red-hot.
12Vsockets
General notes
XTurn theSmartKey to position1in the
ignitionlock (Ypage 147).
The socketscan be used for accessories with
amaximum draw of 180W(15 A).
Accessories include such items as lamps or
chargers for mobile phones.
If you use the socketsfor long periods when
the engine is switched off, the battery may
discharge.
iAn emergencycut-out ensures that the
on-board voltage does not drop too low. If
the on-board voltage is too low, the power
to the socketsisautomatically cut. This
ensures that there is sufficient power to
start the engine.
Socket under the armrest
XOpen the stowage compartment under the
armrest (Ypage 280).
XLift up the cover of socket.
Socket in the front-compartment center
console
All vehicles (except AMG)
XTo open:slide coverforwards until it
engages.
XLift up the cover of socket.
XTo close:briefly press coverat the
front.
The cover moves back.
Features289
Stowage and features
Z

AMG vehicles
XTo open:brieflypress the trim on
cover.
The stowagecompartment opens.
XLiftupthe coverofsocket.
XTo close:folddowncover.
Socket in the rear-compartment center
console
XSlide coverforwards.
XLift up the cover of socket.
Socket in the trunk
XLift up the cover of socket.
mbrace
Important safety notes
!You must havealicense agreement to
activate the mbrace service. Make sure
that your system is activated and ready for
use. To register, press theMB Info call
button.Ifany of the steps mentioned are
not carried out, the system may not be
activated.
If you have questions about the activation,
contact one of the following telephone
hotlines:
RUSA:Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
(1-800-367-6372)or1-866-990-9007
RCanada:Customer Serviceat
1-888-923-8367
Shortly after successfully registeringwith the
service,auser ID and password will be sent
to you by post. USA only: you can use this
password to log ontothe mbrace area under
"Owners Online" athttp://
www.mbusa.com.
The system is available if:
Rit has been activated and is operational
Rthe corresponding mobile phone network
is available for transmitting data to the
Customer Center
290Features
Stowage and features

Raservicesubscription is available
Rthestarter battery is sufficiently charged
iDetermining thelocationofthe vehicle on
amap is only possible if:
RGPS reception is available.
Rthe vehicle position can be forwarded to
the Customer AssistanceCenter.
The mbrace system
To adjust the volume duringacall, proceed
as follows:
XPress theor button on the
multifunction steering wheel.
or
XUse the volume controller of the audio
system/COMAND.
The system offers various services, e.g:
RAutomatic and manual emergency call
RRoadside Assistancecall
RMB Info call
USA only: you can find information and a
description of all available features under
"Owners Online" at http://www.mbusa.com.
System self-test
After you have switched on the ignition, the
system carries outaself-diagnosis.
Amalfunction in thesystem has been
detected if oneofthefollowingoccurs:
RThe indicator lamp in theSOS button does
notcomeonduringthesystem self-test.
RThe indicator lamp in theRoadside
Assistancebuttondoes not light up during
self-diagnosis of the system.
RThe indicator lamp in theMB Info call
button does not light up during self-
diagnosis of the system.
RThe indicator lamp in one or more of the
following buttonscontinues to light up red
after the system self-diagnosis:
-SOS button
-Roadside Assistance call button
-MB Info call button
Rafter the system self-diagnosis, the
InoperativeorService Not
Activatedmessage appears in the
multifunction display.
Ifamalfunction is indicated as outlined
above, the system may not operate as
expected. In the event of an emergency, help
will have to be summoned by other means.
Have the system checked at the nearest
authorized Mercedes-Benz Center or contact
the following service hotlines:
RUSA:Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
RCanada:Customer Serviceat
1-888-923-8367
Emergency call
Important safety notes
!You must havealicense agreement to
activate the mbrace service. Make sure
that your system is activated and ready for
use. To register, press theMB Info call
button.Ifany of the steps mentioned are
not carried out, the system may not be
activated.
If you have questions about the activation,
contact one of the following telephone
hotlines:
RUSA:Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
(1-800-367-6372)or1-866-990-9007
RCanada:Customer Serviceat
1-888-923-8367
Features291
Stowage and features
Z

General notes
An emergency call is dialed automatically if
an air bag or Emergency Tensioning Device is
triggered.
iYou cannot end an automatically
triggered emergency call yourself.
An emergency call can alsobeinitiated
manually.
As soon as the emergency call has been
initiated, the indicator lamp in the SOS button
flashes. The multifunction display shows the
Connecting Callmessage.
The audio outputismuted.
Once the connection has been made, the
Call Connectedmessage appears in the
multifunction display.
All important information on the emergency
is transmitted, for example:
RCurrent location of the vehicle (as
determined by the GPS system)
RVehicle identification number
RInformation on the severity of the accident
Shortly after the emergency call has been
initiated,avoice connection is automatically
established between the Mercedes-Benz
Customer Assistance Center and the vehicle
occupants.
RIf the vehicle occupants respond, the
Mercedes-Benz Customer Assistance
Center attempts to get more information
on the emergency.
RIf there is no response from the vehicle
occupants, an ambulance is immediately
sent to the vehicle.
If no voice connection can be established to
the response center, the system was unable
to initiate an emergency call. This can occur
for instance if the relevant mobile phone
network is not available. The indicator lamp
in the SOS button flashes continuously.
TheCall Failedmessage appears in the
multifunction displayand must be confirmed.
In this case, summon assistance by other
means.
Making an emergency call
GWARNING
It can be dangerous to remain in the vehicle,
even if you have pressed the SOS button in an
emergency if:
Ryou see smoke inside or outside of the
vehicle, e.g. if there isafire after an
accident
Rthe vehicle is onadangerous section of
road
Rthe vehicle is not visible or cannot easilybe
seen by other road users, particularly when
dark or in poor visibility conditions
There isarisk of an accident and injury.
Leave the vehicle immediately in this or
similar situations as soon as it is safe to do
so. Move toasafe location along with other
vehicle occupants. In such situations, secure
the vehicle in accordance with national
regulations, e. g. withawarning triangle.
XTo initiate an emergency call
manually:press coverbriefly to open.
XPress SOS buttonbriefly.
The indicator lamp in SOS button
flashes until the emergency call is
concluded.
XWait foravoice connection to the
Mercedes-Benz Customer Assistance
Center.
XAfter the emergency call, close cover.
iIf the mobile phone network is
unavailable, mbrace will not be able to
make the emergency call. If you leave the
292Features
Stowage and features

vehicleimmediatelyafter pressing the SOS
button, you willnot know whethermbrace
placed the emergency call. In this case,
always summon assistance by other
means.
Roadside Assistance button
XPress Roadside Assistance button.
This initiatesacall to the Mercedes-Benz
Customer Assistance Center. The indicator
lamp in Roadside Assistance button
flashes while the call is active. The
multifunction display shows the
Connecting Callmessage. The audio
output is muted.
Ifaconnection can be made, theCall
Connectedmessage appears in the
multifunction display.
Ifamobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
RCurrent location of the vehicle
RVehicle identification number
iThe COMAND display indicates thatacall
is active. Duringthe call, you can changeto
the navigation menu by pressingthe NAVI
button on COMAND,for example.
Voice output is not available.
Avoice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants.
From the vehicle remote malfunction
diagnosis, the Mercedes-Benz Customer
Assistance Center can ascertain the nature of
the problem (Ypage 297).
The Mercedes-Benz Customer Assistance
Center either sendsaqualified Mercedes-
Benz technician or arranges for your vehicle
to be transported to the nearest authorized
Mercedes-Benz Center. You may be charged
for services such as repair work and/or
towing.
Further details are available in your mbrace
manual.
iThe system has not been able to initiate
aroadside assistance call, if:
Rthe indicator lamp for Roadside
Assistance call buttonis flashing
continuously.
Rno voice connection to the Mercedes-
Benz Customer Assistance Center was
established.
This may be because the corresponding
mobile phone network is not available.
TheCall Failedmessage appears in the
multifunction display.
XTo endacall:press thebutton on the
multifunctionsteering wheel.
or
XPress the corresponding button for ending
aphone callonCOMAND.
MB Info call button
Features293
Sto wag ea nd featur es
Z

XPress MB Infocall button.
This initiatesacall to the Mercedes-Benz
Customer Assistance Center. The indicator
lamp in MB Infocall buttonflashes while
the connection is being made. The
ConnectingCallmessage appears in the
multifunction display and COMAND is
muted.
Ifaconnection can be made, theCall
Connectedmessage appears in the
multifunction display.
Ifamobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
RCurrent location of the vehicle
RVehicle identification number
iThe COMAND display indicates thatacall
is active. During the call, you can change to
the navigation menu by pressing the NAVI
button on COMAND,for example.
Voice output is not available.
Avoice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants. You can
obtain information on how to operate your
vehicle's systems, on the location of the
nearest authorized Mercedes-Benz Center,
and on further products and services offered
by Mercedes-Benz USA.
USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
iThe system has not been able to initiate
an MB Info call, if:
Rthe indicator lamp in MB Info call
buttonis flashing continuously.
Rno voice connection to the Mercedes-
Benz Customer Assistance Center was
established.
This may be because the corresponding
mobile phone network is not available.
TheCall Failedmessage appears in the
multifunction display.
XTo endacall:press thebutton on the
multifunctionsteering wheel.
or
XPress the corresponding button for ending
aphone callonCOMAND.
Call priority
When service calls areactive, e.g.Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an
emergencycall will take priority and override
all other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Mercedes-
Benz Customer Assistance Center.
All other calls can be ended by pressing:
Rthebutton on the multifunction
steeringwheel
Ror the corresponding COMAND button for
endingatelephone call
iWhenacall is initiated, the audio system
is muted. The mobile phone is no longer
connected to COMAND. However, if you
want to use your mobile phone, do so only
when the vehicle is stationary and inasafe
location.
Downloading destinations in COMAND
Downloading destinations
Destination Download gives you access to a
data bank with over 15 million Points of
Interest (POIs). These can be downloaded on
the navigation system in your vehicle. If you
know the destination,the address can be
downloaded. Alternatively, you can obtain the
location of Points of Interest (POIs)/
important destinationsinthe vicinity.
Furthermore, you can download routes with
up to 20 way points.
You are prompted to confirm route guidance
to the address entered.
294Features
Stowage and features