tire MERCEDES-BENZ CLS-Class 2007 W219 Comand Manual

24 At a glance
Multifunction steering wheel
E-Class illustrated
FunctionPage
1 Multifunction display
2 Volume setting:
ç Volume down
æ Volume up
29
29
3 Making calls:
s Answering calls
Redialing
t Ending or refusing
calls
Entering a phone num-
ber:
t Deleting the entire
entry
90
92
91
91
4 Multifunction display
menu change:
è forward
ÿ back
25
25
FunctionPage
5 Radio mode:
j Next station
k Previous station
via station search
via station presets
38
39
5Single CD, CD changer*
and MP3 mode:
j Next track
k Previous track
69
69
5Satellite radio* mode:
j Next station
k Previous station
79
79
5Telephone* mode:
j Next list entry
k Previous list entry
94
94

91 Telephone*
Telephone operation
On the multifunction steering wheel
Presss .
In both cases the call is active. Commu-
nication is conducted via the hands-free
system. The call volume can be adjusted
(
page 29).
For other user functions, see
“Active call” (
page 95).
Ending or refusing a call
On the COMAND control unit
Press4.
On the multifunction steering wheel
Presst .The desired phone number has to be en-
tered when placing an outgoing call.
The following options are available:
entering a phone number directly
(
page 91)
initiating redial (page 92)
selecting an entry in the accepted and
missed calls list (
page 93)
selecting an entry in the dialed calls list
(
page 94)
using speed dial (page 95)
opening the phone book and selecting
an entry (
page 98)
Entering a phone number
Open the Telephone main menu
(
page 89).
Use" - = to enter the phone num-
ber.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the Delete s o f t k e y a s o f t e n a s
required.
or
Press4 on the COMAND con-
trol unit ort on the multifunc-
tion steering wheel.
This deletes the entire entry.
After entering the phone number,
press3.
The telephone dials the entered num-
ber. The call is activated the moment
the other party answers the call. Com-
munication is conducted via the hands-
free system. The volume can be adjust-
ed (
page 29).
For other user functions, see
“Active call” (
page 95).
i
It is also possible to accept, refuse or
end a call from the cellular phone
(
Telephone Operation Guide).
Placing an outgoing call

131 Navigation*
Route guidance
Press any soft key.
The soft key displays appear.
Press the or soft key.
Depending on your selection, the map
will zoom in and display greater detail
or zoom out and show a wider area.
The map scale bar in the status bar will
show the map scale currently selected.
Map orientation
During route guidance, a symbol will ap-
pear on the left of the bottom status bar if
map display is switched ON:
North symbol :
Fixed map orientation, north is always
pointing up;
or
Compass symbol :
Dynamic map orientation, driving direc-
tion is always pointing up.
Map orientation can be set manually
(
page 144).
Changing map display
The map display can be switched between
split-screen mode and full-screen mode
manually or automatically.
Split-screen mode
The map is shown on the left, while in-
formation concerning the next driving
maneuver is shown on the right.
Full-screen mode
The map covers the entire screen.Switching manually
Press6.
Each time 6 is pressed, the system
alternates between split-screen and
full-screen display mode.
Switching automatically
See “Automatic map toggling”
(
page 146).
i
If no soft key is selected within
approx. 8 seconds, the soft key display
will disappear.
i
Depending on the map display setting
(
page 145), in the full-screen mode
the status bar will be display:
the estimated time of arrival/re-
maining distance to the destination
or stopover destination
the position display

134 Navigation*
Route guidance
Route guidance to an off-road destina-
tionCOMAND can guide you to destinations
within the area covered by the digital m ap,
even if a destination is not located at a
road known to the system.
These destinations are shown as off-road
destinations, which you can enter using
the map, for example.
I n t h e s e c a s e s , C O M A N D g u i d e s y o u f o r a s
long as possible with navigation announce-
ments and displays on roads known to the
system.
Shortly before you reach the last known
point in the digitized road network, you will
hear the announcement “The destination is
nearby. Follow the arrow on the display”.
You will then see an arrow that indicates
the direction to the off-road destination.
When the off-road destination is close to
the road,
Area of dest. reached appears in ad-
dition below the arrow.When you leave the last known point in the
digitized road network, direction arrows
showing the compass heading to the desti-
nation guide you. You will also see the
Di-
rection to destination
display.
Route guidance from an off-road loca-
tion to a destination
If there is no road available on map at cur-
rent position of the car, vehicle is off road.
C O M A N D i s a l s o a b l e t o g u i d e y o u t o a d e s -
tination from such a location.
At the start of the route guidance, you will
see the
Off Road message and a direction
arrow. The direction arrow shows the com-
pass heading to the actual destination.
The route is highlighted blue from the near-
est road known to the system.
As soon as the vehicle is back on a road
known to the system, route guidance con-
tinues in the usual way.
Off-road and off-map
WarningG
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver’s sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their ap-
propriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consider-
ation by the COMAND system.

172 System
System settings
A prompt appears asking if resetting
the system and deleting the data is re-
ally intended.
Use# to select the menu item Yes.
Press'.
You are prompted again to confirm if
you really want to reset the system and
delete the data.
Use# to select the menu item Yes.
Press'.
This resets the entire system.
i
If you do not want to reset the system
and not delete the data:
Use $ to select the menu item No.
Press'.
You will exit the reset screen.