jump start MERCEDES-BENZ CLS-Class 2013 W218 Owner's Manual

Service message ............................ 302
Special service requirements .........
302
ATA (Anti-Theft Alarm system)
Activating/deactivating ................... 71
Function ........................................... 71
Switching off the alarm .................... 71
ATTENTION ASSIST
Activating/deactivating ................. 218
Display message ............................ 242
Function/notes ............................. 191
Audio system
see separate operating instructions
Authorized Centers
see Qualified specialist workshop
Authorized Mercedes-Benz Center
see Qualified specialist workshop
Authorized workshops
see Qualified specialist workshop
AUTO lights
Display message ............................ 238
see Lights
Automatic engine start (ECO start/
stop function) .................................... 144
Automatic engine switch-off (ECO
start/stop function) .......................... 143
Automatic headlamp mode ..............111
Automatic transmission Automatic drive program ............... 150
Changing gear ............................... 149
DIRECT SELECT lever .....................146
Display message ............................ 251
Drive program display ....................147
Driving tips .................................... 149
Emergency running mode ..............154
Engaging drive position .................. 148
Engaging neutral ............................ 148
Engaging park position (AMG
vehicles) ........................................ 147
Engaging reverse gear ................... 147
Engaging the park position ............ 147
Kickdown ....................................... 149
Manual drive program ....................152
Overview ........................................ 146
Problem (malfunction) ...................154
Program selector button ................149
Pulling away ................................... 141
Selector lever ................................ 146
Shift ranges ................................... 151Starting the engine ........................
141
Steering wheel paddle shifters ......150
Transmission position display ........ 146
Transmission position display
(DIRECT SELECT lever) ................... 147
Transmission positions .................. 148
Automatic transmission
emergency mode ............................... 154 B
Backup lamp Changing bulbs

.............................. 120
Bag hook ............................................ 275
BAS (Brake Assist System) ................. 64
BAS PLUS (Brake Assist System
PLUS) .................................................... 65
Battery (SmartKey) Checking .......................................... 77
Important safety notes .................... 77
Replacing ......................................... 77
Battery (vehicle)
Charging ........................................ 316
Display message ............................ 241
Important safety notes .................. 314
Jump starting ................................. 317
Blind Spot Assist
Activating/deactivating ................. 219
Display message ............................ 245
Notes/function .............................. 195
see Active Blind Spot Assist
Bottle holder ...................................... 277
Brake Assist see BAS (Brake Assist System)
Brake fluid
Display message ............................ 231
Notes ............................................. 369
Brake lamps
Display message ............................ 237
Brakes
ABS .................................................. 64
BAS .................................................. 64
BAS PLUS ........................................ 65
Brake fluid (notes) .........................369
Display message ............................ 229
Driving tips .................................... 162
High-performance brake system .... 163
Important safety notes .................. 162 Index
5

Driving in winter ............................. 164
Driving on flooded roads
................164
Driving on wet roads ...................... 164
Exhaust check
............................... 160
Fuel ................................................ 159
General .......................................... 159
Hydroplaning ................................. 164
Icy road surfaces ........................... 164
Limited braking efficiency on
salted roads ................................... 162
Pedals ............................................ 160
Snow chains .................................. 329
Symmetrical low beam .................. 110
Wet road surface ........................... 162
Drowsiness detection assistance
system
see ATTENTION ASSIST
DVD audio
Operating (on-board computer) ..... 215
DVD video
Operating (on-board computer) ..... 216E
EASY-ENTRY feature Activating/deactivating

.................223
Function/notes ............................. 104
EASY-EXIT feature
Crash-responsive ........................... 105
Function/notes ............................. 104
Switching on/off ........................... 223
EBD (electronic brake force
distribution)
Display message ............................ 231
Function/notes ................................ 69
ECO display
Function/notes ............................. 160
On-board computer ....................... 213
ECO start/stop function
Deactivating/activating ................. 143
General information ....................... 142
Electronic Stability Program
see ESP ®
(Electronic Stability Program)
Electronic Traction System
see ETS/4ETS (Electronic
Traction System) Emergency release
Driver's door .................................... 82
Fuel filler flap

................................. 155
Trunk ............................................... 86
Vehicle ............................................. 82
Emergency spare wheel
Important safety notes .................. 357
Points to remember .......................358
Removing ....................................... 358
Storage location ............................ 358
Stowing .......................................... 359
Technical data ............................... 361
Emergency Tensioning Devices
Function ........................................... 57
Safety guidelines ............................. 40
Emissions control
Service and warranty information .... 21
Engine
Check Engine warning lamp ........... 264
Display message ............................ 239
ECO start/stop function ................ 142
Engine number ............................... 366
Irregular running ............................ 145
Jump-starting ................................. 317
Starting problems .......................... 145
Starting the engine with the
SmartKey ....................................... 141
Starting with KEYLESS-GO ............. 141
Switching off .................................. 158
Tow-starting (vehicle) ..................... 321
Engine electronics
Problem (malfunction) ...................145
Engine oil
Adding ........................................... 300
Additives ........................................ 369
Checking the oil level ..................... 299
Checking the oil level using the
dipstick .......................................... 299
Display message ............................ 241
Filling capacity ............................... 369
Notes about oil grades ................... 368
Notes on oil level/consumption .... 299
Temperature (on-board computer) . 224
Viscosity ........................................ 369 Index
9

Head bags
Display message ............................ 233
Headlamps
Adding fluid to cleaning system .....301
Cleaning system (capacity) ............ 371
Cleaning system (function) ............ 114
Cleaning system (notes) ................370
Fogging up ..................................... 117
see Automatic headlamp mode
Head restraints
Adjusting ......................................... 99
Adjusting (electrically) .....................99
Adjusting (rear) ................................ 99
Installing/removing (rear) .............. 100
Luxury .............................................. 99
Heating
see Climate control
High-beam headlamps
Display message ............................ 237
Switching Adaptive Highbeam
Assist on/off ................................. 116
Switching on/off ........................... 113
Hill start assist .................................. 142
HOLD function Display message ............................ 243
Function/notes ............................. 178
Hood
Closing ........................................... 299
Display message ............................ 252
Opening ......................................... 298
Hydroplaning ..................................... 164I
Ignition lock see Key positions


Immobilizer .......................................... 71
Indicator lamps see Warning and indicator lamps
Instrument cluster
Overview .................................. 29, 209
Settings ......................................... 220
Warning and indicator
lamps ....................................... 30, 255
Instrument cluster lighting .............. 220
Interior lighting ................................. 117
Automatic control .......................... 118Delayed switch-off (on-board
computer) ......................................
222
Emergency lighting ........................ 118
Manual control ...............................

118
Overview ........................................ 117
Reading lamp ................................. 117
Setting the brightness of the
ambient lighting (on-board
computer) ...................................... 221
Setting the brightness of the
display/switch (on-board
computer) ...................................... 220
Setting the color of the ambient
lighting (on-board computer) ......... 221 J
Jack Storage location ............................ 312
Using ............................................. 350
Jump-start (engine)
see Jump starting (engine)


Jump starting (engine) ...................... 317 K
KEYLESS-GO Convenience closing feature ............ 88
Display message

............................ 254
Locking ............................................ 75
Start/Stop button .......................... 139
Starting the engine ........................ 141
Unlocking ......................................... 75
Key positions
KEYLESS-GO .................................. 139
SmartKey ....................................... 139
Kickdown
Driving tips .................................... 149
Manual drive program ....................152
Knee bag .............................................. 43 L
Lamps see Warning and indicator lamps


Lane detection (automatic)
see Lane Keeping Assist Index
11

Problem Possible causes/consequences and
M SolutionsThe engine cannot be
started using the
SmartKey. The on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating or interior
lighting, and try to start the engine again.
If this does not work:
X Check the starter battery and charge it if necessary
(Y page 316).
or
X Jump-start the vehicle (Y page 317).
or
X Consult a qualified specialist workshop. The engine cannot be
started
using KEYLESS-
GO. The SmartKey is in
the vehicle. A door is open. Therefore, the SmartKey cannot be detected as
easily.
X
Close the door and try to start the vehicle again. There is interference from a powerful source of radio waves.
X
Start your vehicle with the SmartKey in the ignition lock. Doors
Important safety notes
G
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unsupervised in the
vehicle, even if they are secured in a child
restraint

system, and do not give them access
to an unlocked vehicle. A child's unsupervised
access to a vehicle could result in an accident
and/or serious personal injury. They could:
R injure themselves on vehicle parts
R be seriously or fatally injured by extreme
heat or cold
R injure themselves or have an accident with
vehicle equipment that may still be in
operation even after the SmartKey has
been removed from the ignition, such as the
seat adjustment, steering wheel
adjustment or memory function. If children open a door, they could cause
severe

or even fatal injury to other persons; if
they get out of the vehicle, they could injure
themselves when doing so or be seriously or
even fatally injured by any passing traffic.
Do not expose the child restraint system to
direct sunlight. The child restraint system's
metal parts, for example, could become very
hot, and a child could be burned on these
parts. G
WARNING
Do not carry heavy or hard objects in the
passenger
compartment or trunk unless they
are firmly secured in place.
Unsecured or improperly positioned cargo
increases a child's risk of injury in the event
of
R strong braking maneuvers
R sudden changes of direction
R an accident80
Doors
Opening/closing

Problems with the engine
Problem Possible causes/consequences and
M SolutionsThe engine does not
start.
The starter motor
can be heard. R
There is a malfunction in the engine electronics.
R There is a malfunction in the fuel supply.
X Before attempting to start the engine again, turn the SmartKey
in

the ignition back to position 0 or press the Start/Stop button
repeatedly until all indicator lamps in the instrument cluster go
out.
X Try to start the engine again (Y page 141). Avoid excessively
long

and frequent attempts to start the engine as these will drain
the battery.
If the engine does not start after several attempts:
X Consult a qualified specialist workshop. The engine does not
start. You cannot hear
the starter motor. The on-board voltage is too low because the battery is too weak
or discharged.
X
Jump-start the vehicle (Y page 317).
If the engine does not start despite attempts to jump-start it:
X Consult a qualified specialist workshop. The starter motor was exposed to a thermal load that was too high.
X
Allow the starter motor to cool down for approximately two
minutes.
X Try to start the engine again.
If the engine still does not start:
X Consult a qualified specialist workshop. The engine is not
running smoothly and
is misfiring. There is a malfunction in the engine electronics or in a mechanical
component of the engine management system.
X
Only depress the accelerator pedal slightly.
X Have the cause rectified immediately at a qualified specialist
workshop.
Otherwise, non-combusted fuel may get into the catalytic
converter and damage it. The coolant
temperature gauge
shows a value above
248 ‡

(120 †). The coolant level is too low. The coolant is too hot and the engine
is no longer being cooled sufficiently.
X
Stop as soon as possible and allow the engine and the coolant
to cool down.
X Check the coolant level (Y page 300). Observe the warning
notes as you do so and add coolant if necessary. Driving
145
Driving and parking Z

Useful information ............................
312
Where will I find...? ........................... 312
Flat tire .............................................. 313
Battery (vehicle) ................................ 314
Jump-starting .................................... 317
Towing and tow-starting .................. 318
Fuses .................................................. 322 311Breakdown assistance

workshop if you wish to leave your vehicle
parked up for a long period of time.
i
Remove the SmartKey if you park the
vehicle and do not require any electrical
consumers. The vehicle will then use very
little energy, thus conserving battery
power.
i If
the power supply has been interrupted,
e.g. if you reconnect the battery, you will
have to:
R set the clock. Information on setting the
clock can be found in the separate
operating instructions.
On vehicles with COMAND and a
navigation system, the clock is set
automatically.
R reset the function for folding the exterior
mirrors in/out automatically, by folding
the mirrors out once ( Y page 105).Charging the battery
G
WARNING
Never charge a battery still installed in the
vehicle
unless a battery charger unit approved
by Mercedes-Benz is being used. Gases may
escape during charging and cause explosions
that may result in paint damage, corrosion or
personal injury.
A battery charger unit specially adapted for
Mercedes-Benz vehicles and tested and
approved by Mercedes-Benz is available as an
accessory. It permits the charging of the
battery in its installed position. Contact an
authorized Mercedes-Benz Center for further
information and availability.
Charge the battery in accordance with the
separate instructions for the battery charger. G
WARNING
There is a risk of acid burns during the
charging process due to the gases which
escape

from the battery. Do not lean over the
battery during the charging process. G
WARNING
Battery acid is caustic. Avoid contact with the
skin, eyes or clothing.
! Only use battery chargers with a
maximum charging voltage of 14.8 V.
! Only charge the battery using the jump-
starting connection point.
The jump-starting connection point is in the
engine compartment

(Y page 317).
Read the battery charger's operating
instructions before charging the battery.
X Open the hood (Y page 298).
X Connect the battery charger to the positive
terminal and ground point in the same
order as when connecting the donor
battery in the jump-starting procedure
(Y page 317).316
Battery (vehicle)
Breakdown assistance

Jump-starting
G
WARNING
Failure to follow these directions will cause damage to the electronic components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries while connecting or jump starting. You might get injured.
Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or
clothing. In case it does, immediately flush affected area with water, and seek medical help if
necessary.
A battery will also produce hydrogen gas, which is flammable and explosive. Keep flames or
sparks away from battery, avoid improper connection of jumper cables, smoking, etc.
Attempting to jump start a frozen battery can result in it exploding, causing personal injury.
Read all instructions before proceeding. G
WARNING
Non-combusted fuel can collect in the exhaust system and ignite. There is a risk of fire. Avoid
repeated and lengthy starting attempts.
! Vehicles with a gasoline engine: avoid repeated and lengthy starting attempts.
Otherwise, the catalytic converter could be damaged by non-combusted fuel.
Do
not start the vehicle using a rapid charging device. If your vehicle's battery is discharged,
the engine can be jump-started from another vehicle or from a second battery using jumper
cables. Observe the following points:
R The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible,
jump-start the vehicle using a second battery or a jump-starting device.
R Vehicles with a gasoline engine: only jump-start the vehicle when the engine and exhaust
system are cold.
R Do not start the engine if the battery is frozen. Let the battery thaw first.
R Only jump-start from batteries with a 12 V voltage rating.
R Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R If the battery is fully discharged, leave the battery that is being used to jump-start connected
for a few minutes before attempting to start. This charges the empty battery a little.
R Make sure that the two vehicles do not touch.
Make sure that:
R the jumper leads are not damaged.
R when the jumper cables are connected to the battery, uninsulated sections of the terminal
clamp do not come into contact with other metal sections.
R the jumper cables cannot come into contact with parts such as the V-belt pulley or the fan.
These parts move when the engine is started and while it is running.
X Apply the parking brake firmly.
X Shift the transmission to position P.
X Switch off all electrical consumers (e.g. radio, blower, etc.).
X Open the hood (Y page 298). Jump-starting
317
Breakdown assistance Z

Position number
B identifies the charged battery of the other vehicle or an equivalent jump-
starting device. X
Slide cover : of positive terminal ; in the direction of the arrow.
X Connect positive terminal ; on your vehicle to positive terminal = of donor battery B
using the jumper cable, always begin with positive terminal ; on your own vehicle first.
X Start the engine of the donor vehicle and run it at idling speed.
X Connect negative terminal ?
of donor battery B to ground point A of your vehicle using
the jumper cable, connecting the jumper cable to donor battery B first.
X Start the engine.
X Before disconnecting the jumper cables, let the engine run for several minutes.
X First, remove the jumper cables from ground point A
and negative terminal ?, then from
positive terminal ; and positive terminal =, each time beginning at the contacts on your
own vehicle first.
X Close cover : of positive terminal ; after removing the jumper cables.
X Have the battery checked at a qualified specialist workshop.
i Jump-starting is not considered to be a normal operating condition.
i Jumper cables and further information regarding jump starting can be obtained at any
qualified specialist workshop. Towing and tow-starting
Important safety notes
G
WARNING
If you tow the vehicle, you must use a rigid
towing bar if: R
the engine is not running.
R there is a brake system malfunction.
R there is a malfunction in the power supply
or the vehicle's electrical system.
The

power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will need more 318
Towing and tow-starting
Breakdown assistance

It is important that you observe the safety
instructions when towing away your vehicle
(Y page 318).
The automatic transmission automatically
shifts
to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
X Make sure that the vehicle is stationary and
the SmartKey in the ignition lock is in
position 0.
X Turn the SmartKey to position 2 in the
ignition lock.
On vehicles with KEYLESS-GO, use the
SmartKey

instead of the Start/Stop button
(Y page 139).
X Depress and hold the brake pedal.
X Shift the automatic transmission to
position N.
X Release the brake pedal.
X Release the parking brake.
X Switch on the hazard warning lamps
(Y page 114).
X Leave the SmartKey in position 2 in the
ignition lock.
i When towing with the hazard warning
lamps switched on, use the combination
switch as usual to signal a change of
direction.

In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again. Transporting the vehicle
! Only

lash the vehicle down by the wheels
or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes. X
Turn the SmartKey to position 2 in the
ignition lock.
X Shift the automatic transmission to
position N.
As soon as the vehicle is loaded:
X Prevent the vehicle from rolling away by
applying the parking brake.
X Shift the automatic transmission to
position P.
X Turn the SmartKey to position 0 in the
ignition lock and remove the SmartKey
from the ignition lock.
X Secure the vehicle. Notes for 4MATIC vehicles
! Vehicles

with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
If the vehicle has transmission damage or
damage to the front or rear axle, have it
transported on a transporter or trailer.
In the event of damage to the electrical
system
If the battery is defective, the automatic
transmission will be locked in position P. To
shift the automatic transmission to position
N, you must provide power to the vehicle's
electrical system in the same way as when
jump-starting (Y page 317).
Have the vehicle transported on a transporter
or trailer. Tow-starting (emergency starting)
! Vehicles with automatic transmission
must not be started by tow-starting. This
could otherwise damage the transmission.
You can find information on "Jump-starting"
at (Y page 317). Towing and tow-starting
321
Breakdown assistance Z