technical data MERCEDES-BENZ CLS500 2006 W219 Owner's Guide

466 Technical dataFuels, coolants, lubricants etc.In areas where carbon deposits may be
encountered due to lack of availability of
gasolines which contain these additives,
Mercedes-Benz recommends the use of
additives approved by us for use on
Mercedes-Benz vehicles. Refer to Factory
Approved Service Products Pamphlet for a
listing of approved product(s). Follow di-
rections on product label.
Do not blend other fuel additives with fuel.
This only results in unnecessary costs and
may be harmful to the engine operation.
Damage or malfunction resulting from
poor fuel quality or from blending addition-
al fuel additives other than those tested
and approved by us for use on
Mercedes-Benz vehicles listed in the Fac-
tory Approved Service Products pamphlet
are not covered by the Mercedes-Benz
Limited Warranty.
Fuel requirements
Only use premium unleaded gasoline
meeting ASTM standard D 439.
The octane number (posted at the pump)
m u s t b e 9 1 m i n . I t i s a n a v e r a g e o f b o t h t h e
Research (R) Octane Number and the Mo-
tor (M) Octane Number: (R+M)/2). This is
also known as the ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not exceed
10%; MTBE must not exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains 10%
ethanol and 90% unleaded gasoline, can be
used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure, etc.
Coolants
The engine coolant is a mixture of water
and anticorrosion/antifreeze, which pro-
vides:

Corrosion protection


Freeze protection


Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -22°F (-30°C) and corro-
sion protection.

467 Technical data
Fuels, coolants, lubricants etc.
If the antifreeze mixture is effective to
-22°F (-30°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).
The coolant solution must be used
year-round to provide the necessary corro-
sion protection and increase boil-over pro-
tection. Refer to Maintenance Booklet for
replacement interval.
Coolant system design and coolant used
determine the replacement interval. The
replacement interval published in the
Maintenance Booklet is only applicable if
MB 325.0 anticorrosion/antifreeze solu-
tion or other Mercedes-Benz approved
products of equal specification (see
Factory Approved Service Products pam-
phlet) are used to renew the coolant con-
centration or bring it back up to the proper
level.To provide important corrosion protection,
the solution must be at least 45% anticor-
rosion/antifreeze [equivalent to freeze
protection to approximately - 22°F
(-30°C)]. If you use a solution that is more
than 55% anticorrosion/antifreeze [freeze
protection to approximately - 49°F
(-45°C)], the engine temperature will in-
crease due to the lower heat transfer capa-
bility of the solution. Therefore, do not use
more than this amount of anticorro-
sion/antifreeze.If the coolant level is low, water and
MB 325.0 anticorrosion/antifreeze should
be used to bring it up to the proper level
(have cooling system checked for signs of
leakage). Please make sure the mixture is
in accordance with label instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult your authorized Mercedes-Benz
Center.

468 Technical dataFuels, coolants, lubricants etc.Anticorrosion/antifreeze
Your vehicle contains a number of alumi-
num parts. The use of aluminum compo-
nents in motor vehicle engines
necessitates that anticorrosion/antifreeze
coolant used in such engines be specifical-
ly formulated to protect the aluminum
parts. (Failure to use such anticorro-
sion/antifreeze coolant will result in a sig-
nificantly shortened service life.)Therefore, the following product is strongly
recommended for use in your vehicle:
MB 325.0 anticorrosion/antifreeze agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is also
regularly checked each time you bring your
vehicle to your authorized Mercedes-Benz
Center for service.

469 Technical data
Fuels, coolants, lubricants etc.
Anticorrosion/antifreeze quantityModel
Approx. freeze protection– 35°F (– 37°C)
– 49°F (– 45°C)
CLS 500
6.0 US qt (5.7 l)
6.6 US qt (6.2 l)
CLS 55 AMG
7.0 US qt (6.55 l)
7.7 US qt (7.2 l)

470 Technical dataFuels, coolants, lubricants etc.Windshield and headlamp washer system
Both the windshield and headlamp washer
systems are supplied from the windshield
washer fluid reservoir.
The washer fluid reservoir has a capacity of
approximately 7.4 US qt. (7.0 l).

Refill the reservoir with MB Windshield
Washer Concentrate and water (or con-
centrate and commercially available
premixed windshield washer sol-
vent/antifreeze, depending on ambient
temperatures).Windshield and headlamp washer fluid
mixing ratio
For temperatures above “freezing point”,
use MB Windshield Washer Concentrate
“S” and water:


1 part “S” to 100 parts water
(1.34 floz [40 ml] “S” to 1 gallon [4.0 l] wa-
ter).
For temperatures below “freezing point”
use MB Windshield Washer Concentrate
“S” and commercially available premixed
windshield washer solvent/antifreeze:


1 part “S” to 100 parts solvent
(1.34 floz [40 ml “S” to 1 gallon [4.0 l] sol-
vent).
Warning!
G
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may ignite
and burn. You can be seriously burned.

472 Technical termsBar
(
page 332)
BAS
(Brake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
Bead
(
page 332)
Bi-Xenon headlamps*
Headlamps which use an electric arc as
a light source and produce a more in-
tense light than filament headlamps.
Bi-Xenon headlamps produce low
beam and high beam.CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service
center which can help you with any
questions about your vehicle and pro-
vide assistance in the event of a break-
down.
CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control
vehicle functions such as door locking
or windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.Cold tire inflation pressure
(
page 332)
Collapsible tire
An especially compact spare tire that
must be inflated with a provided air
pump before using. It should only be
used to bring the vehicle to the nearest
service station.
COMAND
(Cockpit M
anagement and D
ata
System)
Information and operating center for
vehicle sound and communications
systems, including the radio and navi-
gation system, as well as other optional
equipment (CD changer, telephone,
etc.).

483 Index
Door
Entry lamps 143
Message in display 382
Remote door unlock (Tele Aid) 269
Door control panel 32
Door handle 32
Doors
Opening from inside vehicle 111
DOT 332, 473
Drinking and driving 279
Drive-dynamic seat* 127
Driving
Abroad 287
Hydroplaning 283
In winter 285
Instructions 46
Problems 56
Safety systems 84
Systems 222
Through standing water 287
Driving hints
Electro-hydraulic brake system 92
Driving instructions 279
Driving off 282Driving safety systems
ABS 84
BAS 86
Electro-hydraulic brake system 89
ESP
®
86, 473
Driving systems 222
Airmatic DC 238
Cruise control 222
Distronic* 226
Driving safety systems 84
Vehicle level control 239
DTR see Distronic*
Dual control
Airmatic DC 238
E
Easy-entry/exit feature* 42
Electric air pump 427
Electrical fuses see fuses
Electrical system, Technical data 458Electro-hydraulic brake system 89, 476
Activation 90
Deactivation 91
Driving hints 92
Messages in display 375, 376
Self-check 91
Warning lamp 89
Electronic Stability Program see ESP
®
Emergency calls
Tele Aid calls 263
Emergency operation
(Limp-Home Mode) 190
Emergency operations 406
Fuel filler flap 404
Gear selector lever, Unlocking 404
Locking/unlocking the vehicle 402
Power tilt/sliding sunroof,
manual operation 406
Remote door unlock 269
Trunk lid, Releasing trunk from
inside 120
Trunk lid, Unlocking 403
Emergency tensioning device see ETD

484 IndexEmission control 289
Emission control information label 446
Emission control system warranties 10
Emission control vacuum line routing
diagram label 446
Engine 448
Belt layout 447
Block heater* (Canada only) 337
Break-in recommendations 278
Cleaning 344
Compartment 293
Malfunction indicator lamp 355
Maximum engine speed 448
Number 473
Starting 49
Technical data 448
Turning off with the key 60
Engine compartment
Hood 293Engine oil
Adding 296
Additives 464
Changing 464
Checking level 294
Consumption 294
Filler neck 297
Messages in display 295, 382, 383
Recommended engine oils rand
oil filters 464
Viscosity 473
Engine oil level 295
ESP
®
86, 473
Synchronizing 368
Warning lamp 353
ETD 73, 473
Safety guidelines 68
Exterior lamp switch 134
Exterior rear view mirrors 44
Parking position 169, 192F
First aid kit 398
Flat tire 419
Collapsible tire 426, 427
Jacking up the vehicle 425
Lowering the vehicle 429
Mounting the spare wheel 423, 426
Preparing the vehicle 419
Spare wheel 423
TIREFIT kit* 419
Flexible Service System
(Canada vehicles) 339
Flexible Service System (FSS) 474
Floormats 260
Fog lamp, rear 138
Fog lamps
Messages in display 387, 388, 389,
390
Fog lamps, front
Switching on 137
Front lamps 412
Replacing bulbs 414
Switching on 134

493 Index
SmartKey with KEYLESS-GO* 103
Battery check lamp 107
Changing 409
Global locking and unlocking 107
Loss of 111
Messages in display 385, 386, 389
Remote controls 103
Turning off the engine 60
Unlocking with 35
Snow chains 337
Spare fuses 441
Spare wheel 398, 457
Speed settings
Cruise control 225
Speedometer
Displays 228
Speedometer display mode
Selecting 160
Sporty driving style 238
SRS 477
Indicator lamp 25, 64, 359
Messages in display 393
Standing lamps 134
Standing water, Driving through 287Starter switch 36
Positions 36
Starting difficulties 51
Starting the engine 49
Steering wheel
Cleaning 349, 350
Storage compartments 30, 251
Center armrest 252
Center console 252
Glove box 251
Seat 253
Storing
Tires 303
Storing (Memory function*)
Positions into memory 132
Submenus
Selecting 158
Settings menu 158
Sun visors 193
Supplemental Restraint System
(SRS) 477
Suspension tuning
For comfortable driving style 238
For sporty driving style 238T
Tachometer 146
Overspeed range 146
Tail lamps
Cleaning lenses 346
Replacing bulbs 416
Taillamps
Messages in display 390
Tar stains 343
Technical data
Rims and tires 449
Tele Aid 261
Call priority 268
Emergency calls 263
Hands-free microphone 29
Information 267
Initiating an emergency call
manually 264
Messages in display 393
Remote door unlock 269
Roadside assistance 265
SOS button 264
Stolen vehicle Recovery services 269
System self-check 263

Service and Literature
Your authorized Mercedes-Benz Center has trained technicians and original Mercedes-Benz parts to service your vehicle properly. For
expert advice and quality service, contact your authorized Mercedes-Benz Center.
If you are interested in obtaining service literature for your vehicle, please contact your authorized Mercedes-Benz Center. We consider
this the best way for you to obtain accurate information for your vehicle.
For further information you can find us on the Mercedes-Benz web-site www.mbusa.com or www.mercedes-benz.ca.
We reserve the right to modify the technical details of the vehicle as given in the data and illustrations of this Operator’s Manual.
Reprinting, translation and copying, even of excerpts, is not permitted without our prior authorization in writing.
Press time August 16, 2005
GSP / TIP
Printed in Germany
Warning
G
To help avoid personal injury, be extremely careful when performing any service work or repairs. Improper or incomplete service or the use of
incorrect or inappropriate parts or materials may damage the vehicle or its equipment, which may in turn result in personal injury.
If you have any questions about carrying out any type of service, turn to the advice of an authorized Mercedes-Benz Center.