relay MERCEDES-BENZ CLS500 2008 W219 Owner's Manual

139 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO start/stop button* is in
position1. The control system enables you
to:

call up information about your vehicle

change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the multifunction display, and
much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Trip odometer
3Automatic transmission program mode
4Main odometer
5Current gear selector lever position
Above illustration shows the standard
display.
For more information on menus displayed
in the multifunction display, see “Menus”
(
page 142).
iThe displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.

378 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
DThe cooling fan for the coolant is
malfunctioning.Observe the coolant temperature indicator in the
instrument cluster (
page 26).
If the coolant temperature is under 248°F (120°C),
you may continue driving to an authorized
Mercedes-Benz Center.
Avoid placing heavy loads on the engine (e.g. by
driving uphill) as well as stop-and-go traffic.
Have the fan replaced as soon as possible.
± Display Malfunction
Service RequiredCertain electronic systems are
unable to relay information to
the control system. The follow-
ing systems may have failed:

Coolant temperature display

Tachometer

Cruise control display
Have the electronic systems checked by an autho-
rized Mercedes-Benz Center.
Engine
ServiceThere may be a malfunction in:

the fuel injection system

the ignition system

the exhaust system
Have the engine checked as soon as possible by an
authorized Mercedes-Benz Center.