navigation system MERCEDES-BENZ E-Class 2006 W211 Comand Manual

141 Navigation*
During route guidance
Press the Details soft key, if you want to
see details of the selected destination.
The details disappear again after
approx. 3 seconds, or when pressing
the
Details soft key again.
Press  to confirm the selection of a
destination.
The system begins to calculate the
route to the selected stop-over destina-
tion.
Changing/deleting stop-over destina-
tions
Show the soft key displays
(
page 135).
.
Press the St-over soft key.
The menu for deleting or changing the
stop-over destination appears.
Use to select the
Delete active stopover entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination;
or
Use to select the
Replace active stopover entry.
Press .
The stop-over is deleted, a new stop-
over destination can be entered
(
page 139).
i
A stop-over destination can be
changed or deleted only while the route
guidance to this stop-over is active (in-
dicated by ).
i
If no route guidance to a stop-over des-
tination is active yet (
page 139).

142 Navigation*
During route guidance
Show the soft key displays
(
page 135).
Press the Display soft key.
The Display menu appears.
Selectable soft keys:
Symbols soft key
Provides access to setting the symbols
display (
page 142).
View soft key
Provides access to setting the map ori-
entation (
page 143).
GPS soft key
Provides access to the Position Display
menu (
page 144).
Auto soft key
Provides access to the Automatic Map
Switching menu (
page 145).
Zoom soft key
Provides access to the definition of the
scales for full-screen and split-screen
map display (
page 145).
You can select which POIs will appear as
symbols on the map.
In the Display menu (page 142)
press the
Symbols soft key.
The available options appear.
Use  or to select an option.
Press.
The selected option is activated. A solid
circle designates an activated op-
tion.
Standard option:
The symbols for the system default
setting are displayed on the map.
Defining route guidance displays
Setting symbols displays
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale (
page 133).

145 Navigation*
During route guidance
Depending on the previous setting,
GPS position display will be switched
ON or OFF.
Finally, press the Back soft key or wait
for the screen to change.
If you have set the map view to full screen
(
page 134) and the automatic map tog-
gling function is activated, then the follow-
ing happens:
The system automatically switches to
the split-screen map display when a
driving maneuver is announced.
As soon as the driving maneuver is
completed, the system automatically
returns to full-screen map display.
Switching automatic toggling ON/OFF
In the Display menu (page 142),
press the
Auto soft key.The Options
On and Off appear.
Use  or to select the desired
option.
Press .
Depending on the previous setting, au-
tomatic map toggling will be switched
ON or OFF.
Finally, press the Back soft key or wait
for the screen to change.
You can select whether the full-screen and
split-screen map scales are to be set to-
gether (default setting) or individually.
In the Display menu, press the
(
page 142) Zoom soft key.
The
Standard setting and Manual options
appear.
Automatic map toggling
i
The solid circle shows the current
setting.
Scales for full-screen and
split-screen map display


149 Navigation*
Last destinations and destination memory
Starting route guidance to a destina-
tion stored in the destination memory
Select a destination.
Press .
The Start Route Guidance menu ap-
pears.
Press if you want to start route
guidance, otherwise press the
Back soft
key.
Deleting a destination from the destina-
tion memory
Select a destination (page 148).
Press the Delete soft key.
A delete entry prompt appears.
Use  to select the menu item Yes.
Press .
The system deletes the entry from the
destination memory.Storing a destination
In the Start Route Guidance menu
(
page 130), press the Save soft key;
or
Select a destination from the Last
destinations memory (page 147) and
press the
Save soft key.
The system automatically shows a de-
fault name (the city if applicable) as
Destination name; however a different
name can be entered.
Storing under the default name
Press and hold  for approx. 2 sec-
onds;
or
Use or  to select the sym-
bol and press .
The system will store the address un-
der the default name.Storing under a different name
Press the Delete soft key to delete the
default name.
Upper and lower case characters, accent-
ed characters, special characters and
numbers can be entered.
To select lower or upper case or to select
special characters, the following shift sym-
bols on the display are available:
 = upper case
 = lower case
 = special characters
ok
i
The name must have at least one char-
acter.
i
Symbol “ ” represents a space.
ABC
abc
...


150 Navigation*
Last destinations and destination memory
If necessary, use,  or to se-
lect one of the shift fields.
Press.
The characters are shifted.
Use , , , ,  or  to
select the characters. Press  after
each selection.
If necessary, press the Delete soft key
to delete the character last entered.
Upon completion of the name entry
press and hold  for approx. 2 sec-
onds;
or
Use or  to select the sym-
bol and press .
The system will store the address.
i
Do not confuse the Delete soft key (de-
letion of the last character) with the
Back soft key (deletion of the complete
entry).ok

163 System
System settings
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances
correct navigation for routes with time-
dependent traffic guidance, and
correct calculation of the estimated
time of arrival.
Use or  to select the hours or
the minutes.
Press or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.
Press the Back soft key.
The new setting is stored.Setting the date
Use or  to select the day, the
month or the year.
Press or .
Depending on the selection, the day,
the month, or the year is set.
Press the Back soft key.
The new setting is stored.
Setting the date/Time format
Press the Format soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
i
There is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
i
The date can be set only if GPS recep-
tion is available.


164 System
System settings
Setting the format:
Use or  to select a format.
Press.
The appropriate format is selected.
Press the Back soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.
In the System menu (page 162),
press the
Lang. soft key.
The language list is displayed.The following options are available:
Instr. cluster settings:
The system switches to the lan-
guage already set in the vehicle in-
strument cluster (
Vehicle
Operator’s manual).
All other options:
The system switches to the re-
quested language.
i
List entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set
Setting the language

169 System
System settings
Canceling individualization
You can cancel individualization at any
time during either the first or second
stage. All existing data remains un-
changed.
During any individualization stage,
press the
Cancel soft key.
Individualization is cancelled.
Deleting individualization
From the Individualization menu,
press to select menu item
Delete
individualization
.
Press.
A prompt appears, which asks if you re-
ally want to delete the data.
Press to select Yes.
Press.
The individualization is deleted.Actuating the Reset function resets
COMAND to the factory settings.
In addition, it deletes:
SMS: All SMS messages.
Navigation*: All entries in the Destina-
tion memory and in the Last destina-
tion memory.
Reset activation
Call up the System menu (page 162).
Press the Reset soft key.
i
This function is not available if no indi-
vidualization data has been saved.
Reset function


171 Glossary
Autostore
Enters the stations with the best recep-
tion (signal strength) into the autostore
memory in order of their reception
quality (from strong to weak).
Balance
Volume adjustment between left and
right speakers.
Bit
(Bi
nary digit)
The smallest unit of digital information.
Bit rate
Measurement of transmission speed.
Indicates the number of ->bits trans-
mitted per time unit.
CD
(C
ompact Disc)
Digital storage medium in disc form.
CD-R
(CD
Recordable)
->CD which can be read and written but
not deleted.CD-RW
(CD
Rewriteable)
->CD which can be read, written and
deleted.
COMAND
(Co
ckpit Management and Data Sys-
tem)
Information and operating center for
vehicle sound and communication sys-
tems, including the radio and CD play-
er, as well as for other optional
equipment (CD changer*, telephone*,
satellite radio*, navigation*).
Coordinates
Indicate the geographical position on
the earth's surface.
DVD
(D
igital Versatile Disc)
Digital storage medium in disc form for
storing large volumes of data.Fader
(Fader control)
Volume control between front and rear
speakers.
Folder
Alternative designation for directories.
Data saved on a storage medium can
be organized into directories for im-
proved clarity. Can be likened to a filing
cabinet containing a number of folders,
each of which holds a number of docu-
ments.
Greenwich meridian
A specific north-south line running
through Greenwich, England.
GPS
(G
lobal Positioning System)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs DVD digital maps for
navigation.
Glossary

175 Index
A
Accepted calls (telephone). . . . . . . . 93
Accessing CD changer. . . . . . . . . . . . 61
Adding spoken names to a phone
book entry . . . . . . . . . . . . . . . . . . . . 100
Answering call (telephone). . . . . . . . 91
Audio AUX mode . . . . . . . . . . . . . . . . 72
switching to . . . . . . . . . . . . . . . . . . . 72
Automatic volume control . . . . . . . . 31
Autostore (in Radio mode) . 39, 43, 171
B
Balance. . . . . . . . . . . . . . . . . . . . 31, 171
for navigation announcements . . . . 112
Bass. . . . . . . . . . . . . . . . . . . . . . . . . . . 32
for navigation announcements . . . . 112
Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Bit rate (MP3). . . . . . . . . . . . . . . . . . 171
permissible rates . . . . . . . . . . . . . . . 52
C
Call (Telephone)
answering . . . . . . . . . . . . . . . . . . . . . 91
ending . . . . . . . . . . . . . . . . . . . . . 91, 96
outgoing calls . . . . . . . . . . . . . . . . . . 94
placing an outgoing call . . . . . . . . . . 91
refusing . . . . . . . . . . . . . . . . . . . . . . . 91
CALL NOT POSSIBLE . . . . . . . . . . . . . 84
Calling up Destination memory . . . 148
Cancelling
navigation announcements . . . . . . . 131
route guidance . . . . . . . . . . . . . . . . 134
Caring for CDs . . . . . . . . . . . . 44, 50, 60
Category list (satellite radio) . . . . . . 77
CD . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
see also MP3 CD
copy protection . . . . . . . . . . . . . . 45, 62
ejecting . . . . . . . . . . . . . . . . . . . . 46, 65
loading . . . . . . . . . . . . . . . . . . . . 45, 61
random CD (CD changer mode) . . . . 71
repeat (CD changer mode) . . . . . . . . 71
selecting . . . . . . . . . . . . . . . . . . . . . . 67CD changer
accessing . . . . . . . . . . . . . . . . . . . . . 61
retracting . . . . . . . . . . . . . . . . . . . . . 61
CD changer mode. . . . . . . . . . . . . . . . 60
controls . . . . . . . . . . . . . . . . . . . . . . . 18
Safety Instructions . . . . . . . . . . . . . . 60
switching to. . . . . . . . . . . . . . . . . . . . 61
CD slot
CD changer . . . . . . . . . . . . . . 62, 64, 65
MP3. . . . . . . . . . . . . . . . . . . . . . . . . . 17
single CD . . . . . . . . . . . . . . . . . . . . . . 15
CD-R. . . . . . . . . . . . . . . . . . . . . . . 51, 171
CD-RW . . . . . . . . . . . . . . . . . . . . . 51, 171
Changing
detour (navigation) . . . . . . . . . . . . . 138
map scale . . . . . . . . . . . . . . . . . . . . 133
stop-over destination . . . . . . . . . . . 141
CHANNEL UNAVAILABLE. . . . . . . . . . 77
COMAND. . . . . . . . . . . . . . . . . . . . . . 171
switching ON/OFF . . . . . . . . . . . . . . 30
system settings . . . . . . . . . . . . . . . . 162
Index