83 Telephone*
Important notes
Always drive with extreme caution
when operating the telephone hands-
free.
For safety reasons, the cellular phone
handset should not be used to place or
receive a call while driving.
If the signal is very weak (display in the
status bar):
Wait until reception improves before
placing a call.
Close the windows and reduce all ex
-
ternal noise as much as possible when
using hands-free operation.
Make sure that the air vents are not
pointed in the direction of the micro
-
phones located in the overhead control
panel near the rear view mirror. Adjust
air vents and/or reduce blower speed
if necessary.
A brief disconnection from the cellular
network is not a malfunction, as this
can occur when the network switches
areas. The phone automatically at
-
tempts to again sign on with a network.
If the message
Enter
unlock
code
is
displayed, enter the unlock code
( page
88)
. Only then will you be able
to use all the telephone functions. You will still be able to make 911 emer
-
gency calls
( page
85)
if the tele
-
phone is locked.
The telephone cannot, or not yet, be used
in the following situations:
The telephone is already unlocked, but
it is not yet registered with the net
-
work. The message
NO SERV.
appears in the
status bar. The telephone automatical
-
ly attempts to register with a network.
If there is no network available, “911”
emergency calls can NOT be placed.
If you try to place an outgoing call, the
message
Call
not
possible
is dis
-
played temporarily.
If the message
Telephone
being
activated,
please
wait
is displayed,
If the message
Please
insert
phone
is
displayed.
Insert the cellular phone into the
telephone cradle.
iThis Operator's Manual describes op
-
eration of the telephone using the
COMAND control unit and the multi
-
function steering wheel. Unless other
-
wise specified, the descriptions and
the illustrated displays refer to the
COMAND control unit. Operation of the cellular phone and
voice control system* are explained in
separate operation guides.
