seats MERCEDES-BENZ E-CLASS CABRIOLET 2010 User Guide
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2010, Model line: E-CLASS CABRIOLET, Model: MERCEDES-BENZ E-CLASS CABRIOLET 2010Pages: 333, PDF Size: 7.64 MB
Page 94 of 333
Vehicl
eequipment .............................. 92
Correct driver' sseat position ............92
Seats .................................................... 93
Steering wheel .................................... 99
Mir rors ............................................... 101
Memor yfunctions ............................. 103 91Seats, steering wheel an
dmirrors
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 91
Page 95 of 333
Vehicl
eequipment
i Thismanua ldesc ribe sallthe standard
and optional equipment of your vehicle
which wa savailable at th etime of pur-
chase. Countr y-specif ic differences are
possible. Bear in mind tha tyour vehicle
ma ynot featur eall function sdescribed
here. Correct driver'
sseat position Observe the safety guidelines on
(Y
page 93).
X Check whether you have adjusted seat =
properly.
Manual and electrical seat adjustment
(Y page 93)
Electrical seat adjustment (Y page 94)
When adjustin gthe seat, make sure:
R you ar easfar away from the driver' sair-
bag as possible.
R you are sitting in anormal upright posi-
tion.
R you can fasten the seat belt properly. R
you have moved the back rest to an
almost ver tical position.
R you have se tthe seat cushion angl eso
that your thighs are gently supported.
R you can depress the pedals properly.
X Check whether the head restraint is adjus-
ted properly (Y page 94).
Whe ndoing so, make sure that you have
adjusted the head restraint so that the back
of your head is supported at eye leve lby
the centr eofthe head restraint.
Observ ethe safety guidelines on
(Y page 99).
X Chec kwhether steering wheel :is adjus-
ted properly.
Adjust the steering wheel manually
(Y page 99)
Adjust the steering wheel electrically
(Y page 10 0)
When adjustin gthe steering wheel, make
sure:
R you can hold the steering wheel with your
arms slightl ybent.
R you can mov eyour legs freely.
R you can see all the display sint he instru-
men tcluster clearly.
Observe the safety guidelines on
(Y page 40).
X Check whether you have fastened seat
belt ;properly (Y page 41).
The seat belt should:
R fit snugly across your body.
R be routed across the middle of your
shoulder.
R be routed in your pelvic area across the
hip joints.
X Befor estarting off, adjust the rear-view mir-
ror and the exterior mirror s(Ypage 10 1)
in such away that you have agood view of
roa dand traffic conditions.
X Vehicles with memory function: save the
seat, steering wheel and exterior mirror
settings (Y page103). 92
Correct driver's seat positionSeats, steering wheel an
dmirrors
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 92
Page 96 of 333
Seats
Important safety notes
G
Ris
kofi njury
The seats can still be adjusted when there is
no key in the ignition lock. For this reason,
children should never be left unsupervised in
the vehicle. They could adjust the seats and
becom etrapped. G
Ris
kofa ccident
Only adjust the driver' sseat when the vehicle
is stationary .You will otherwise be distracted
from the road and traffic condition sand you
could los econtrol of the vehicle as aresult of
the seat moving. This could cause an acci-
dent. G
Risk of injury
Make sure that nobody can becom etrapped
when adjustin gthe seats.
Observ ethe note sonairbags.
Secur echildren as recommended; see the
"Childre ninthe vehicle" section. G
Risk of injury
Make sur ethat the bac kofyour head is sup-
ported at eye level by the cen tralarea of the
head restraint. If your head is not supported
correctly by th ehead restraint ,you coul dsuf-
fer asever eneck injury in the event of an
accident .Never driv eifthe head rest raints are
not engaged and set correctly.
! To avoid damage to the seats and the seat
heating, observe the following information:
R do not spill any liquids on the seats. If
liquid is spilled on the seats, dry them as
soon as possible.
R if the seat cover sare damp or wet, do not
switc hont he seat heating. The seat
heating should also not to be used to dry
the seats. R
clea nthe seat cover sasrecommended;
see the "In terior care" section.
R do not transport heav yloads on the
seats. Do not plac eshar pobjects on the
seat cushions ,e.g. knives, nails or tools.
Th es eats should only be occupied by
passengers, if possible.
R when the seat heatin gisinoperation ,do
not cover the seats with insulating mate-
rials, e.g. blanke ts,c oats, bags, seat cov-
ers, child seats or booster seats.
! When you mov ethe seats, make sur ethat
ther eare no objects in th efootwell or
behind the seats. Otherwise, you could
damage the seats and the objects.
i The head restraint sinthe fron tseats are
fit tedw ith the NECK -PRO system
(Y page 39). For this reason, it is not pos-
sibl etor emov ethe head restraint sfrom
th ef ront seats.
Please contact aMercedes-Ben zService
Cent refor more info rmation.
i Related topics:
R Through-loading feature in the rear
bench seat 19
(folding the rear bench seat
forwards) Adjusting the seats manually and
electrically
:
Backrest angle
; Seat height
19 Only in the Coupé. Seats
93Seats,steering wheel and mirrors
BA 207 ECE ÄJ 201 0/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 93 Z
Page 97 of 333
=
Sea tcushion angle
? Sea tfore-and-aft adjustment
i Adjust the sea tcushion angle so that your
thighs ar elightly supported.
Seat fore-and-af tadjustment X
Lift handle ?and slide the seat forwards
or backwards.
Seat cushio nangle X
Tur nhandwheel =in the desired direction. Adjusting the seat electrically
:
Head restraint height
; Seat cushion angle
= Seat height
? Seat fore-and-aft adjustment
A Backrest angle
i Vehicles with memory function: if PRE-
SAFE ®
has been triggered, the front-
passenger seat will be moved to abetter
position if it was previously in an unfavour-
able position.
i You can store the seat settings using the
memory function (Y page 103).
i Vehicles with the through-loading feature
and memory function: if you fold down a
rear seat backrest ,the respective front
seat is moved forwards slightl yifneces-
sary. i
Vehicles with memory function: when the
seat is moved forwards or backwards, the
headrest is moved up or down automati-
cally. Adjusting the hea
drestraints
Adjusting the head restraints manually Adjusting the head restraint height
X
To raise: pull the head restraint up to the
desired position.
X To lower: press release catch :and push
the head restraint down to the desired posi-
tion.
Adjusting the head restraints electri-
cally X
To adjust the head restraint height: slide
the switch for head restraint adjustment
(Y page 94) up or down in the direction of
the arrow. 94
SeatsSeats, steering wheel and mirrors
BA 20
7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 94
Page 98 of 333
Rear seat head restraints
Lowering and extendin
gthe rear seat
head restrai ntsf rom the fron t(Ca briolet) X
Make sure that the key is in position 2in
the ignition lock.
X To lower: press button :.
The hea drestraints mov etothe lowest
position.
If AIRCAP is activated, the ri ght-hand indi-
cato rlamp on the AIRCAP button goes out.
X To extend: press button :again.
The head rest raints only move into the cen-
tral position if AIRCAP is activated and no
rear seat belt has been fastened.
If AIRCAP is activated, the right-hand indi-
cator lamp on the AIRCAP button comes
on.
i More detailed information about AIRCAP
can be found on (Y page 84). Manu
ally lowering the hea drestraints
in the rear (Cabriolet)
If the head restraints in the rear compar tment
are in the upper position, the soft top cannot
be closed fully. If the head restraint electron-
ics are malfunc tionin gand the adjustment
procedure of the soft top is interrupted leav-
ing the soft top compartment cover open, you
therefor ehave to lower the head restraints in
the rear compartment manually. Lower the head restraints in the rear com-
partmen
tmanually if:
R the head rest raint electronics are malfunc-
tioning
R theo pening or closin gprocedure of the so ft
top is interrupted leaving the soft top com-
partmen tcover open. Cover
;can only be released when the
openin gorclosing procedur eofthe soft top
is interrupte dleaving the soft top compart-
men tcover open.
X Push the emergenc ykey elemen tinto two
openings :between the hea drestraints
until cover ;releases.
X Remov ecover ;. X
Tur nthumbwheel :in the direction of the
front seat to lower the head rest raints. Seats
95Seats, steerin gwhee land mirrors
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 95 Z
Page 99 of 333
Folding th
efront seat backrests
forward/back G
Ris
kofi njury
Mak esure that the back rest engage sfully. If
the back rest is no tengaged ,the message:
Front right seat backrest no tlocked
or Front lef tseatb ackrest not
locked appears in th emultif unctio ndisplay.
Stop the vehicle as soon as road and traffic
condition spermit and rem ove anyobjects
that are blocking the backrest. G
Risk of injury
Make sure that nobody can becom etrapped
when movin gthe seat. If there is arisk of
someon ebecoming trapped, press the seat
adjustmen tswitc honthe door.
With the EASY-EN TRY feature, the seat moves
forward sifyou have folde dthe seat bac krest
forwards and th eseat is in th erear half of the
adjustment range. This makes it convenient
for passengers to get in and out of th erear
compartment.
The head restrai ntalso lowers on vehicles
with electric seat adjustment. Example: Coupé Folding th
ebackres tforwards X
Vehicles withou tmemor yfunction:
rel ease the hea drestra intifn ecessary and
push it down.
X Pull seat release handle :forwards and
fold the backrest forwards, until the seat
backrest engages.
X Push the seat as far forwards as it will go.
X Vehicles with memory function: pull seat
releas ehandle :forwards and fold the
backrest forwards as far as it will go.
The seat moves automatically to the fore-
most position.
Folding back the backrest X
Vehicles without memory function:
push the seat backrest back horizontally
until the seat reaches the position that was
previously set.
X Swing back the seat backrest evenly below
release handle :until it engages ,doing so
in as mooth manner.
X After th eseat back rest has been folded
back, chec kthe position of the head
restraint and set it to the correc tposition.
X Vehicles with memory function: swing
back the seat backrest.
The seat moves automatically to the stored
position. Adjusting th
emulticontour seat
Yo uc an adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides. 96
SeatsSeats
,steering whee land mirrors
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 96
Page 100 of 333
:
To adjust the thigh cushion
; To adjust the backrest contour in the lum-
bar region
= To adjust the backrest contour in the
upper back region
? To adjust the side bolster softhe seat
backrest
X Make sur ethat the key is in position 2in
the ignition lock. Adjusting th
e4-way lumbar support
Yo uc an adjust the contour of the fron tseat
backrest sindividually to provide optimum
support for your back. :
To raise the backres tcontour
; To soften the backrest con tour
= To lower the backrest contour
? To harden the backrest contour i
The setting of the 4-way lumbar support
is automatically checked when:
R the door is unlocked
R the door is opened
R the key is in position 1in the ignition lock
The individual setting is restored. Switching the seat heating on/off
Switching on/off G
Risk of injury
Repeatedl ysetting the seat heating to level
3 may result in excessiv eseat temperatures.
The health of passengers that have limited
temperatur esensitivit yoralimited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3repeatedly.
The three red indicator lamps in the button
indicat ethe heating level you hav eselected.
i If the batter yvoltage is too low, the seat
heatin gmay switch off. Driver's and front-passenger seat
The system automatically switches down
from level
3to level 2after approximately
eigh tminutes.
The system automatically switches down
from level 2to level 1after approximately ten
minutes. Seats
97Seats, steerin gwhee land mirrors
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 97 Z
Page 101 of 333
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X Make sure that the key is in position 1or
2 in the ignition lock.
X To switc hon:press button :repeatedly
until the desired heatin glevel is set.
X To switc hoff:press button :repeatedly
until all th eindicato rlamps go out.
Problems with the seat heating The seat heating has switched itself off pre-
maturely or cannot be switched on. The vehi-
cle's electrical system voltage is too low
because too many electrical consumers are
switched on.
X Switc hoff electrical consumers which you
do not need, such as th erear window heat-
ing or interior lighting. Switching the seat ventilation on/off
Switching on/off The three blue indicator lamps in the buttons
indicate the ven tilation level you have selec-
ted.
i If the battery voltage is too low, the seat
ventilation may switch off. X
Make sure that the key is in position 1or
2 in the ignition lock.
X To switch on: press button:repeatedly
until the desired ventilation level is set. i
Coupé: you can open the side windows
and the panoram asliding sunroof with the
key (Y page 75). The seat ventilation of the
driver's seat automatically switches to the
highes tlevel.
Cabriolet: you can open the soft top and the
rear side windows with the key
(Y page 78). The seat ven tilation of the
driver's seat automatically switches to the
highes tlevel.
X To switc hoff:press button :repeatedly
until all th eindicato rlamps go out.
Problems with the seat ventilation The seat ventilation has switched itself off
prematurely or cannot be switched on. The
vehicle's electrical system voltage is too low
because too many electrical consumers are
switched on.
X Switc hoff electrical consumers which you
do not need, such as th erear window heat-
ing or interior lighting. AIRSCARF (Cabriolet)
Switching on/off G
Risk of inju
ry
Very hot air can flow out of the AIRSCARF
ven tsin the head restraints when AIRSCARF
is in operation. This can cause burns on unpro-
tected skin near the AIRSCARF vents. Lower
the heating output in good time, when neces-
sary.
The AIRSCARF func tion warms the head and
nec karea of vehicl eoccupants with warm air.
Th ew arm air flows out of the hole sinthe head
rest raints.
The three red indicator lamps in the button
indicate the heating level you have selected. 98
SeatsSeats, steerin
gwhee land mirrors
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 98
Page 102 of 333
X
Make sur ethat the key is in position 2in
the ignition lock.
X To activate: press button :.
Three red indicator lamps in the button light
up. The blower starts up after apreheating
phas eofseven seconds.
X Press button :repeatedly until the
desired heatin glevel is set.
X To switc hoff:press button :repeatedly
until all th eindicato rlamps go out.
You can use the adjustable fins on the head
restraint to adjust the height of the current of
air blown out according to your height.
Make sure that there are no objects covering
the intake grille on the back of the driver's
seat backrest.
i The blower continues running for seven
seconds to cool down the heating ele-
ments.
i If the battery voltage is too low, AIRSCARF
may switch off. Steering wheel
Important safety notes
G
Risk of injury
The electrically adjustable steering wheel can
still be adjusted when there is no key in the
ignition lock. Therefore, do not leave children
unsupervised in the vehicle, as they could
become trapped if the steering wheel is adjus-
ted. G
Risk of accident
Only adjust the steering wheel when the vehi-
cle is stationary and do not pull away until the
steering wheel adjustment mechanism is
locked in position. You might otherwise drive
without the steering wheel adjustment mech-
anism being locked in position. As aresult,
you could be distracted from road and traffic
condition sbyanunintentional movement of
the steering wheel and thereby cause an acci-
dent.
However, the steerability of the vehicl eisnot
affected. Adjusting th
esteerin gwheel man-
ually :
Release lever
; To adjus tthe steering wheel height
= To adjust the steering wheel position
(fore-and-af tadjustment)
X Push release lever :down completely.
The steerin gcolum nisu nlocked.
X Adjus tthe steering wheel to the desired
position.
X Push release lever :up completely.
The steering column is locked.
X Chec kifthe steering column is locked.
When doing so, tr ytopush the steering
wheel up or down or try to move it in the
fore-and-aft direction. Steering wheel
99Seats, steeringwhee land mirrors
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 99 Z
Page 103 of 333
Adjusting th
esteering wheel electri-
cally :
To adjust th esteering whee lheight
; To adjust th esteering whee lposi tion
(fore-and-af tadjustment)
i Related topics:
R EASY-ENTRY/EXIT feature
(Y page 100)
R storing setting s(Ypage 103) Steering whee
lEASY ENTRY/EXIT fea-
ture G
Ris
kofi njury
Mak esuret hat nob ody can become trapped
when you activa tethe EASY-ENTRY/EXIT fea-
ture.
If there is arisk of someon ebecoming trap-
ped, stop th eadjustmen tprocedure. To ha lt
the procedure:
R move the switch for steering whee ladjust-
ment in the opposite direction to that in
which the steerin gwheel is moving.
R press one of the memory function position
buttons.
Never leave children unsu pervis edin the vehi-
cle. They could open the driver's door and
thereby unintentionally activate the EASY-
ENTRY/EXIT featur eand become trapped.
The EASY-ENTRY/EXIT feature makes getting
in and out of you rvehicle easier. The steering wheel swings upwards when
you:
R
remove the key from the ignition lock
R open the driver' sdoor and the key is in
position 0or 1in the ignition lock
i The steering wheel only moves upwards if
it has not already reached the upper end
stop.
If you inser tthe key int othe ignition lock with
the driver's door closed ,the steering wheel is
automatically moved to the previously set
position.
The last position of the steering wheel is
stored after eac hmanual setting or when you
store the setting with the memory function
(Y page 103).
You can activate and deactivat ethe EASY-
ENTRY/ EXIT feature in th eon-board com-
puter (Y page208).
i If the crash-responsive EASY-EXIT feature
is trigge redinana ccident,the steering col-
um nw ill move upwards when the driver's
door is opened. This occur sirrespective of
th ep osition of the key in the ignition lock.
This makes it easier to exit the vehicle and
rescue the occupants.
The crash-responsive EASY- EXIT feature is
only operational afte ranaccidentif the
EASY-EXIT/ENTRY featur eisactivate din
the on-board computer. 100
Steerin
gwheelSeats, steering wheel an dmirrors
BA 207ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 100