ignition MERCEDES-BENZ E-CLASS CABRIOLET 2010 Owners Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2010, Model line: E-CLASS CABRIOLET, Model: MERCEDES-BENZ E-CLASS CABRIOLET 2010Pages: 333, PDF Size: 7.64 MB
Page 26 of 333
Cockpit
i
Illustration: Cabriolet Function Page
:
Automatic transmission:
steering wheel gearshift
paddles
145
;
Cruise control lever 158
=
Instrumen
tcluster 24
?
Horn
A
PARKTRONI
Cwarning dis-
play 174
B
Overhead con
trol panel 29
C
Operate
sTHERMATIC/
THERMOTRONIC 120
D
Ignition lo
ck 135
Start/Stop button
135 Function Page
E
Adjusts the steering wheel
manually
99
F
Adjusts the steering wheel
ele
ctri cally 99
G
Combination swi
tch 108
H
Parking brake 153
I
On-board diag
nostics con-
nection J
Open
sthe bonnet 259
K
Release
sthe parking brake 153
L
Ligh
tswitch 106
M
Headlam
prange adjust-
ment 110Cockpit
23Atag lance
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite23
Page 36 of 333
gered unintentionally
.Never carry out any
modifications on the restraint systems.
Never tamper with electronic components
and their software. SRS (Supplemental Restraint System)
Introd uction SRS reduces the risk of occupants coming
into contact with the vehicle's interio
rinthe
even tofana ccident. It can als oreduce the
effect of the forces to which occupant sare
subjected during an accident.
SRS consists of:
R 6 SRS warning lamp
R airbags
R airbag con trol unit (with crash sensors)
R belt tensioners
R belt force limiters
SRS warning lamp SRS func
tions ar echecked regularly when
you switc honthe ignition and when the
engin eisrunning. Therefore, malfunctions
can be detected in good time.
The 6 SRS warning lamp in the instrument
cluster lights up when the ignition is switched
on. It goes out no later than afew seconds
after the engine is star ted. G
Risk of inju
ry
If SR Sism alfunctioning, individual systems
may be activated unintentionally or may not
be triggered in the event of an accident with
ah igh rate of vehicle deceleration.
Am alfunction has occurred if:
R the 6 SRS warning lamp does not light
up after the ignition is switched on.
R the engine is runnin gand the 6SRS
warning lamp doe snot go out after afew
seconds.
R the engine is runnin gand the 6SRS
warning lamp lights up again. In this case, have SRS checked immediately
at
aq ualified specialist workshop .Mercedes-
Benz recommends that you use aMercedes-
Benz Servic eCentr efor this purpose.
In particular ,work relevant to safet yoron
safety-related systems must be carried out at
aq ualified specialist workshop.
Triggering of belt tensioners, belt force
limiters and airbags In the event of
acollision ,the airbag con trol
unit evaluates important physical data relat-
ing to the vehicle deceleration or acceleration
during the first stage of the collision, such as:
R duration
R direction
R magnitude
Based on the evaluation of this data ,the air-
bag con trol unit pre-emptivel ytriggers the
belt tensioners in th efirst stage.
i The belt tensioners can only be triggered
if the seat belt tongues are correctly
engaged in the seat belt buckles.
The front airbags are also deployed if there is
an even higher rate of vehicle deceleration in
al ongitudinal direction.
Your vehicle has adaptive, dual-stage front
airbags. In the even tofacollision, the airbag
control unit evalu atesthe vehicle decelera-
tion. Whe nthe first deploymen tthreshol dis
reached, th efront airbag is fille dwith enough
gas to reduce the risk of injuries. The front
airbag is fully deployed if asecon ddeploy-
men tthreshold is exceeded withi nafew mil-
liseconds.
Th eb elt tensioner and airbag triggering
thresholds are variable and are adapted to the
rat eofd eceleration of the vehicle. This proc-
ess is pre-emptiv einnature. The triggering
process must take place in good time at the
start of the collision.
i Not all airbags are deployed in an acci-
dent. The different airbag systems work
independently of each other. Occupant safety
33Safety
BA 207ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 33 Z
Page 44 of 333
R
Children less than 1.50 mtall or under 12
years of age cannot wear the seat belts
properly. Therefore, they always should be
secured in asuitable child restraint system
on asuitable vehicle seat. You can find
more information under "Children in the
vehicle" in the "Safety" section of the Own-
er's Manual. Follow the manufac turer's
installatio ninstructions whe nfitting the
child restraint system.
R Do not secure any objects with aseat belt
if the seat belt is also being used by one of
the vehicle's occupants. G
Risk of injury
The seat belt does not offer the intended level
of protection unless the back rest is almost
ver tical. Under certain circumstances, this
coul dcause severe or even fatal injuries in the
event of an accident.
Befor estarting ajourney, mak esure that the
seat is properly adjusted and that the back-
rest is almost vertical. G
Risk of injury
Ad irtyo rdamaged seat belt or aseat belt that
has been subjected to aload in an accident
or which has been modified no longer offers
the intended level of protection. Un dercertain
cir cumstances, this could caus esever eor
even fatal injuries in the even tofanaccident.
For thi sreason, check regularly that the seat
belts are not damaged or dirty.
Alway shaved am aged sea tbelts or seat belts
that have been subjected to aload in an acci-
dent replaced at aqualified specialist work-
shop. Consult aqualified specialist workshop
which has the necessary specialist knowledge
and tools to carry out the work required.
Mercedes -Benz recommends that you use a
Mercedes-Benz Ser vice Centre for thi spur-
pose.
For safety reasons, Mercedes -Benz recom-
mends that you only use seat belts which have
been approved by Mercedes-Benz for your
vehicle. Fastening seat belts The seat-belt extender for the driver and front
passenger helps you fasten your seat belt.
Example: Coupé
Seat-belt extender
:is extended when the
respective door is closed and the key is
tur nedtop osition 1or 2in the ignition lock.
You can also activa teseat -belt extender :
by using the seat-belt extender button in the
centre console. X
Press the seat-belt extender button.
Seat -belt extender :extends. G
Risk of inju
ry
The seat-belt extender must be ret racted
whe nthe vehicle is in motion .Only then can
the sea tbelt fit properly on the body and per-
for mi ts protective function.
Seat-belt extender :is retracted again if:
R the belt tongue is engaged in the sea tbelt
buckle.
R the belt tongue is not engaged in the seat
belt buckle within 60 seconds. Occupant safety
41Safety
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 41 Z
Page 45 of 333
R
the respective door is opened.
R the key is turne dtoposition0in the ignition
lock.
R the backr estis release dand folde dfor-
wards.
R nobod yissitting on the front-p assenger
side after approximat elyf ives econds.
If yo upress th eseat-bel textender button
afte rthis, seat-belt extender :will not
extend. Example: Coupé
X
Adjust the seat and mov ethe backrest to
an almost vertical position (Y page 92).
X Pull the seat belt smoothly out of seat-belt
extender :.
X Withou ttwisting it, place the shoulde rsec-
tion of the seat belt over the centre of the
shoulder and the lap section across the
hips.
X Engage belt tongue ;in buckle =.
Seat belt adjustmen t:if necessary, the driv-
er' sa nd front-passenger sea tbelts auto-
maticall yadjust to the upper body
(Y page 42).
X If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.
The rear seat belts are equipped with achild
seat lock (Y page 45). If you pull out the seat belt fully and then allow the iner
tiar eel to
ret ract it, the child-seat lock is activated. To
deactivate the child-seat lock ,unfasten the
sea tbelt and guide the belt tongue to the belt
sash guide.
For mor einformation about releasing the seat
bel tw ith release button ?,see "Releasing
seat belts" (Y page 42).
Seat belt ad justment The belt adjustment function adjusts the driv-
er' sa nd front-passenger sea tbelt to the
upper body of the occupants. The belt strap
is tightened slightly when:
R you engage the belt tongue in the belt
buckle and you then tur nthe key to position
2 in the ignition lock.
R the key is in position 2in the ignition lock
and you then engage the belt tongue in the
buckle onc ethe seat-belt extender has
ret racted.
Th es eat-belt adjust ment will appl yacertain
tightening for ceif any slack is detected
between the occupan tand the sea tbelt. Do
not hold on to the seat belt tightly while it is
adjusting. You can switc hthe belt adjustment
on and off in the on-boar dcompu ter
( Y page 20 9).
Releasin gseat belts X
Press release button ?(Ypage 41) and
guide belt tongue ;(Ypage 41) back
towards seat belt extender :(Ypage 41).
Belt warning for driver and front
passenger The
7 seat belt warnin glamp in the instru-
ment cluster is areminder for all occupants
to fasten their seat belts. It may light up con-
tinuously or flash. In addition ,ther em ay be a
warning tone.
The 7 seat belt warning lamp goes out and
the warning ton eceases when the driver and
the fron tpassenger have fastened their seat 42
Occupant safetySafety
BA 20
7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 42
Page 46 of 333
belt. If the vehicle is stationar
yand adoor is
opened, the 7seat belt warnin glamp
goes out and the warning ton eceases.
For cer tain countries only: regardless of
whether the driver or the fron tpassenger
have fastened their seat belts, the 7seat
belt warning lamp lights up for 6seconds
after the engin eisstarted. It then goe sout
onc ethe driver and the fron tpassenger have
fastened their seat belts.
i For mor einformation on the 7seat
bel twarning lamp, see "Indicator and warn-
in gl am ps in the instrument cluster ,seat
belt" (Y page 236).
Rear seat belt status indicator The rear-compartment sea
tbelt status indi-
cator tells you if the rear passengers have
their seat belts fastened.
The rear-compartment seat belt status indi-
cator indicates the rear seat on which the belt
is fastened.
The rear-compartment seat belt status indi-
cator appear sint he multifunction displa yfor
around 30 seconds if:
R you drive off and reach aspeed of approx-
imately 10 km/h.
R the rear passengers fasten or unfasten
their seat belts while the vehicle is in
motion.
R someon egets in or out of the vehicle and
the vehicle drives off again. Example: the passenger in the right rea
rseat has
their seat belt fastened
You can also cancel the rear seat belt status
indicator immediately (Y page 210). i
The status indicator for the rear- compart-
ment seat belts is only available for certain
countries.
Bel ttensioners, belt force limiters The seat belts are fitted with belt tensioners.
!
If the front-passenger seat is not occu-
pied, do not engage the seat belt tongue in
the buckle on the front-passenger seat.
Otherwise, the belt tensioner could be trig-
gered in the event of an accident.
The belt tensioners tighten the seat belts in
an accident, pulling them close against the
body.
Belt tensioners do not correct incorrect seat
positions or incorrectly fastened seat belts.
Belt tensioners do not pull vehicle occupants
back towards the backrest.
If the seat belt is also fitted with abelt for ce
limiter and this is triggered, the forc eexerted
by the sea tbelt on the vehicle occupan tis
red uced.
Th ef ront be ltforce limiter sare synchronised
wit hthe front airbags, whic htake on apart of
the deceleration force. Thus, the force exer-
ted on the occupant is distributed over a
greater area.
The belt tensioners can only be activated
when:
R the ignition is switched on
R the restraint systems are operational; see
"SRS warning lamp" (Y page 33)
R the belt tongue is engaged in the buckle on
each of the three-point seat belts in the
front
The belt tensioners on the seats in the rear
compartment are triggered independently of
the lock status of the seat belts.
The belt tensioners are triggered depending
on the type and severity of an accident:
R in the event of ahead-on or rear-end colli-
sion if the vehicle decelerates or acceler- Occupant safety
43Safety
BA 207ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 43 Z
Page 49 of 333
Child seat on th
efront-passenger seat War
ning notic eonthe front-pa ssenger sun visor War
ning symbol for arearward-facing child
restraint system G
Ris
kofi njury
If th efront-p assenger front airbag is not dis-
abled:
R ac hilds ecured in achildr estraint system
on th efront-p assenger seat could be seri-
ously and even fatally injured by the front-
passenger front airbag deploying .This is
especially arisk if the child is in the imme-
diate vicinity of the fron t-passenger front
airba gwhen it deploys.
R never secur eachild on the front-passenger
seat in arearward-facing child restraint sys-
tem. Only secur earearward-facing child
restraint system on asuitable rear seat.
R always move the front-passenger seat to
the rearmost position if you secure achild in
af orward-facing child restraint system
on the front-passenger seat.
The front-passenger front airbag is not disa-
bled:
R on vehicles withou tautomatic child seat
recognition on the front-passenger seat
R on vehicles with automatic child seat rec-
ognition on the front-passenger seat, if
there is no child restraint system with auto-
matic child seat recognition fitted to the
front-passenger seat.
R on vehicles with automatic child seat rec-
ognition on the front-passenger seat, if the
PASSENGER AIRBAG OFF warning lamp
4 is not lit.
To make you aware of this danger, acorre-
spondin gwarning sticker has been affixed on
the dashboard and on both sides of the sun
visor on the front-passenger side.
Infor mation about recommended child
restraint systems is available at any
Mercedes-Benz Service Centre.
Automatic child seat recognitio nonthe
front-passenge rseat If your vehicle does not have automatic child
seat recognition
2
on the fron t-passenger
seat, this is indicated by aspecial sticker. The
sticker is affixed to the side of the dashboard
on the front-passenger side. The sticker is
2 Vehicles withou tautomatic child seat recognition on the front-passenger seat: if you turn the key to position
2int he ignition lock ,PASSENGER AIRBAG OFF warning lamp 4lights up briefly but has no function. It
doe snot indicat ethat ther eisa utomatic child seat recognition on the front-passenger seat. 46
Children in th
evehicleSafety
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 46
Page 53 of 333
Problems wit
hchilds eat recognition Problem Possible causes/consequences and
M Solutions
The
4 PASSENGER
AIRB AGOFF indicator
lam ponthe cen trecon-
sole is lit. As
pecial Mercedes-Benz child seat with automatic child seat rec-
ognition has been fit tedtot he front-passenger seat. The front-
passenger airbag has therefor ebeen disabled as desired. G
Risk of inju
ry
There is no child seat fit tedtot he front-passenger seat. Aut omatic
chil dseat recognition is malfun ctioning.
It is also possible that the 6SRS warnin glamp lights up and/
or the 4PASSENGER AIRBAG OFF warning lamp does not light
up briefly when you switch the ignition on.
X Remove electronic equipment from the front-passenger seat,
e.g.
R
laptop
R mobile phone
R cards with transponde rs,s uch as ski passes or access cards
If the 4 PASSENGER AIRBAG OFF indicator lamp is still on:
X Visit aqualified specialist workshop. 50
Children in th
evehicleSafety
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 50
Page 60 of 333
R
dirt on the sensor sorthe sensor sare cov-
ered
R sno worh eavy rain
R interferenc ebyother radar sources
R strong radar reflections, for example in
multi-storey car parks
BA SP LUS does no treact to people or ani-
mals, oncomin gvehicles and crossin gtraffic.
BAS PLUS may not detect narrow vehicles
such as motorcycle sand vehicles driving on
ad ifferen tline.
Following acollision or collision-related dam-
age to the fron tend of the vehicle, have the
configuratio nand operatio nofthe radar sen-
sors chec kedataM ercedes-Ben zService
Centre.
If BAS PLU Sisn ot available due to amalfunc-
tion in the radar senso rsystem, the brake
syste mremains available with ful lbrake
boostin geffect and BAS. Adaptiv
ebrake lamps
i Adaptive brake lamps are only available in
certain countries.
If you brake sharply from aspeed of more
than 50 km/ horifbraking is assisted by BAS
or BAS PLUS, th ebrake lamp sflash rapidly.
In this way, traffic travelling behind you is
warned in an even more noticeable manner.
If you brake sharply from aspeed of more
than 70 km/ htoastandstill, the hazard warn-
ing lamps are activated automatically .Ifthe
brakes ar eapplied again, the brak elamps
light up continuously .The hazard warning
lamps switc hoff automatically if you travel
faster than 10 km/h .You can also switc hoff
th eh azard warning lamps using the hazard
warning switch button (Y page 110). ESP
®
(Electronic Stability Program)
Important safety notes If ESP
®
detect sthat the vehicle is deviating
from the direction desired by the driver ,one
or more wheels are braked to stabilis ethe
vehicle. If necessary, the engin eoutput is also
modified to keep the vehicle on the desired
course within physical limits. ESP ®
assists
the driver when pulling away on wet or slip-
pery roads. ESP ®
can also stabilise the vehi-
cle during braking.
If ESP ®
intervenes, the äwarning lamp
flashes in the instrument cluster. G
Risk of accident
If the ä warning lamp in the instrument
cluster flashes, proceed as follows:
R do not deactivate ESP ®
under any circum-
stances.
R only depress the accelerator pedal as far as
necessary when pulling away.
R adapt your driving style to suit the prevail-
ing road and weather conditions.
Otherwise ,the vehicle coul dskid.
ESP ®
cannot reduce the risk of an accident if
you drive too fast. ESP ®
cannot override the
laws of physics.
! The ignition must be switched off if you
are towing the vehicl ewith the front/rear
axle raised. Interven tion by ESP ®
coul doth-
erwise damage the brake system.
i Only use wheels with the recommended
tyre sizes. Only then will ESP ®
function
properly.
ETS (Electronic Traction Support) Traction control is part of ESP
®
.
Traction control brakes the drive wheels indi-
viduall yifthey spin. This enables you to pull
away and accelerate on slipper ysurfaces, for
example if the road surface is slippery on one
side. Driving safety systems
57Safety
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafaV ersion: 3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 57 Z
Page 64 of 333
X
To activate with the key: remove the key
from the ignition lock.
X To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
X To deactivate: switch on the ignition.
i The immo biliserisa lway sdeactivated
when yo ustart the engine. ATA (Anti-Theft Alarm system)
Av isual and audible alarm is triggered if the
alarm system is prime dand you ope n:
R ad oor
R the vehicle with the emergency key ele-
ment
R the boot lid
R the bonnet
The alar misnot switched off ,even if you
close th eopen door that has triggere dit, for
example. X
To prime: lock the vehicle with the key or
KEYLESS-GO.
Indicator lamp :flashes. The alarm sys-
tem is primed after approximately 15 sec-
onds.
X To deactivate: unlock the vehicle using the
key or KEYL ESS-GO. X
To stop th ealarm using the key: insert
the key into the ignition lock.
The alarm is switched off.
or
X Press the %or& button on the key.
The alarm is switched off.
X To stop the alarm using KEYLESS-GO:
grasp the outside door handle. The key
must be outside the vehicle.
The alarm is switched off.
or
X Press the Star t/Stop butto nonthe dash-
board. The key must be insid ethe vehicle.
The alar misswitched off. Tow-away protection
An audible and visual alarm is triggered if your
vehicle's angle of inclination is altered while
tow-away protection is primed. This occurs if
the vehicle is jacked up on one side, for exam-
ple.
X To prim etow-away protection: lock the
vehicle with the key or, on vehicles with
KEYL ESS-GO ,bytouching the outside door
handle.
Tow-away protection is primed after
approximately 30 seconds.
X To deactivate tow-awa yprotection:
unlock the vehicle using the key or KEY-
LESS-GO.
Tow-away protection is deactivate dauto-
matically.
To prevent afalse alarm, deactivate tow-away
protection manually if your vehicle:
R is being transported
R is being loaded onto aferr yorc ar trans-
porter, for example
R is parked on amovable surface, e.g. in a
split-leve lgarage Anti-theft systems
61Safety
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 61 Z
Page 65 of 333
X
To deactivate tow-away protection:
remove the key from the ignition lock.
X Press button :.
Indicato rlamp ;lights up briefly.
X Loc kthe vehicle with the key or, if the vehi-
cle has KEYL ESS-GO,bytouching the out-
side door handle.
Tow-away protection remains deactivated
until:
R the vehicle is unlocked again.
R ad oor is opened and closed again.
R the vehicle is locked again. Interior motion sensor
If the interior motion sensor is primed, avis-
ual and audible alarm is triggered when move-
ment is detected in the vehicle interior while
the vehicle is locked. This occur sifsomeone
reaches int othe vehicle interior, for example.
Priming th einterior motion sensor
X Make sure that:
R
the side windows are closed.
R the panorama sliding sunroof is closed
(Coupé).
R there are no objects, e.g. mascots, hang-
ing on the rear-view mirror or on the grab
handles on the roof trim.
This will prevent false alarms.
X Cabriolet: makesure that the roof is
closed.
X Lock the vehicle using the key. On vehicles
with KEYLESS-GO, you can also lock the vehicles by touching the door handle on the
outside.
The interior motion senso
risp rime dafter
approximately 30 seconds.
i Cabrio let: in some countries the interior
motion sensor is primed even if the soft top
is open. The vehicle should only be parked
with the soft top closed, however, to pre-
vent insects or falling leaves ,for example,
from causing false alarms.
Deactivating th einterior motion sensor
X Unlock the vehicle with the key or KEY-
LE SS -GO.
The interio rmotion sensor is deactivated
automatically.
To prevent afalse alarm, deactivate the inte-
rior motion senso rifyou lock your vehicle
and:
R people or animals remain in the vehicle.
R the side window sremai nopen.
R the panorama sliding sunroof remains open
(Coupé).
Deactivating the interio rmotion sensor
X Remove the key from the ignition lock. X
Press button :.
Indicator lamp ;flashes briefly.
X Lock the vehicle using the key. On vehicles
with KEYL ESS-GO,you can also lock the
vehicles by touching the door handle on the
outside.
The interior motion sensor remains deacti-
vated until: 62
Anti-thef
tsystemsSafety
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 62