MERCEDES-BENZ E-CLASS CABRIOLET 2018 Owner's Manual

00BBMake surethat no engine oil is spilled
next tothefiller opening.
00BBAllow the engine tocool off and thor‐
oughly clean the engine oil from compo‐
nent parts before starting theve hicle.
0075 NO
TEEngine damage causedbyan
incor rect oil filter, incor rect oil or addi‐
tives
00BBDo not use engine oils or oil filters
which do not cor respond tothe specifi‐
cations explicitly prescribed forth e
service inter vals.
00BBDo not alter the engine oil or oil filter in
order toachie velonger change inter vals
th an prescri bed.
00BBDo not use additives.
00BBFollow the instructions in the service
inter val display rega rding the oil
ch ange.
0075 NO
TEDama gecaused bytopping up too
much engine oil
Ad ding too much engine oil can cause dam‐
age tothe engine or the catalytic con verter.
00BBHa ve excess engine oil remo ved at a
qu alified specialist workshop.
00BBTu rn cap 1counter-clockwise and remo ve
it.
00BBAd d engine oil.
00BBReplace cap 1and turn it clockwise as far
as it will go.
00BBCheck the oil le vel again (→page 318).
Checking coolant le vel
0071
WARNING Risk of burn s from hot com‐
ponent parts in the engine compartment
Cer tain component parts in the engine com‐
partment can be very hot, e.g. the engine,
th e cooler and parts of theex haust sy stem.
00BBLet the engine cool down and only
to uch the component parts described
as follo ws .
0071
WARNING Danger of burn s from hot
coolant
The engine cooling sy stem is pressurized,
particularly when the engine is warm. If you
Maintenance and care 31
9

openthe cap, you could bescalded byhot
coolant spr aying out.
00BBLet the mo tor cool down before opening
th e cap.
00BBWhen opening the cap, wearglove s and
pr otective eyew ear.
00BBSlowly turn the cap half a turn toallow
pressure toescape.
00BBPark theve hicle on a le vel sur face.
00BBCheck the coolant temp erature display in the
instrument clus ter.
The coolant temp erature must be below
15 8 °F (70 °C).
00BBSlowly turn cap 1counter-clockwise to
re lie ve ove rpressure.
00BBContinue turning cap 1counter-clockwise
and remo veit.
The coolant le vel is cor rect:
Rifth e engine is cold, up tomar ker bar 2.
Rifth e engine is warm, up to0.6 in (1.5 cm)
ov er mar ker bar 2.
00BBIf necessar y,top up with coolant that has
been appr ovedby Mercedes-Benz.
RFurther information on coolant (→page 391)
Ad ding washer fluid tothe windshield
wa sher sy stem
0071
WARNING Risk of burn s from hot com‐
ponent parts in the engine compartment
Cer tain component parts in the engine com‐
partment can be very hot, e.g. the engine,
th e cooler and parts of theex haust sy stem.
00BBLet the engine cool down and only
to uch the component parts described
as follo ws .
0071
WARNING Danger of burn s when open‐
ing the hood
If yo u open the hood when the engine has
ove rheated or during a fire inthe engine
compartment, you could come into contact
wit h hot gases or other escaping operating
fl uids.
00BBBefore opening the hood, allow the
engine tocool down.
320
Maintenance and care

00BBIntheeve nt of a fire inthe engine com‐
partment, keep the hood closed and
call thefire service.
0071
WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Wi ndshield washer concentrate is highly
fl ammable. It could ignite if it comes into
con tact wi thhot engine component parts or
th eex haust sy stem.
00BBMake sure that no windshield washer
concentrate spills out next tothefiller
opening.
00BBRe mo vecap 1bytheta b.
00BBAd dwa sher fluid.
Cleaning and care
Informa tiononwashing theve hicle in a car
wa sh
0071
WARNING Risk of accident due to
re duced braking ef fect af terwa shing the
ve hicle
The braking ef fect is reduced af terwa shing
th eve hicle.
00BBAfterth eve hicle has been washed,
brake carefully while paying attention to
th e traf fic conditions until the braking
ef fect has been ful lyrestored.
To avo id damage to yourvehicle when using a
car wash, ensure thefo llowing beforehand:
RTo avo id possible water ingress in theve hi‐
cle, it is preferable touse car washes which
allow the high-pressure pre-wash tobe deac‐
tivated (specification forth e con vertible pro‐
gram).
RIt is imperative toavo id a subsequent hot-
wa x treatment.
Maintenance and care 321

RRemo vethe SmartK eyin order toensure that
th e wind deflector on the windshield retracts.
RAc tive Dis tance Assist DISTRONIC and the
HOLD function are deactivated.
RThe 360° Camera or there ar view camera is
switch ed off.
RThe side windo wsand soft top are closed
comple tely.
RTh eblowe rfo rth eve ntilation/heating is
switched off.
RThe windshield wiper switch is in position
005A.
RIn car washes with a towing mechanism: neu‐
tral 005Cis engaged.
RThe SmartK eyis at a dis tance of at least
10 ft(3 m) away from theve hicle, otherwise
th e trunk lid could open unintentionally.
00CE If, af terth e car wash, youre mo vethewa x
from the windshield and wiper rubber, this
will pr event smearing and reduce wiper
noise.
Information on using a high-pre ssure cleaner
0071
WARNING Risk of accident when using
high-pressure cleaning equipment wi th
ro und-spr aynozzles
The wate r jet from a round-spr aynozzle (dirt
grinder) may cause damage totires and sus‐
pension components that is not visible.
Components damaged in this wa yma yfa il
unexpec tedly.
00BBDo not use high-pressure cleaning
equipment wi thround-spr aynozzles to
clean your vehicle.
00BBDamaged tires or suspension compo‐
nents must be replaced immediatel y.
Toavo id damage to yourvehicle, obser vethefo l‐
lowing when using a high-pressure cleaner:
RKe ep the SmartK eyat least 10ft(3 m) away
from theve hicle. Otherwise the trunk lid
could open unintentionall y.
RMaintain a distance of at least 11.8 in
(30 cm) totheve hicle.
RVe hicles with deco rative foil: parts of your
ve hicle are co vered with a decorative foil.
Maintain a dis tance of at least 27.6 in
(70 cm) between thefo il-c ove red parts of the
ve hicle and the nozzle of the high pressure
cleaner. Mo vethe high-pressure cleaner noz‐
zle around whilst cleaning.
RObser vethe information on the cor rect dis‐
ta nce in the equipment manufacturer's oper‐
ating instructions.
RDo not point the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tires, the soft top, the wind deflector net,
slits, electrical component parts, batteries,
light sources and ventilation slot s.
Washing theve hicle byhand
Obser vethe legal requirements, e.g. in a number
of countries, washing byhand is only permitted
in specially designated wash ba ys.
00BBUse a mild cleaning agent, e.g. car shampoo.
322
Maintenance and care

00BBWashtheve hicle with luk ewarmwate r using
a soft car sponge. When doing so, do not
ex pose theve hicle todirect sunlight.00BBCarefully hose theve hicle off with water and
dry using a chamois. Take care not topointthewate r jet directly towa rdsth e air inlet
grille.
Maintenance and care 323

Notes on paintwo rk/matt finish paintwork care
Observethefo llowing information:
Cleaning and car eA voiding paintwork damage
Pa intwork
RInsect remains: soak with insect remo ver and rinse off the
trea ted areas af terw ards.
RBird droppings: soak with water and rinse off af terw ards.
RCoolant, brake fluid, tree resins, oils, fuel and greases:
re mo veby gently rubbing with a clo thsoaked in petroleum
et her or lighter fluid.
RTa rst ains: use tarre mo ver.
RWa x: use silicone remo ver.
RDo not attach sticke rs,fi lms or similar.
RRe mo vedirt immediatel y,where possible.
Matt finish
ROnly use care products appr oved byMercedes-Benz.RDo not polish theve hicle and light-alloy wheels.
ROnly use car washes that cor respond tothe latest engi‐
neering standards.
RDo not use car wash programs with a final hot wax treat‐
ment.
RDo not use paint cleane rs, buf fing or polishing products,
gl oss preser vers, e.g. wax.
RAlw ays ha vepaintwork repairs car ried out at a qualified
specialist workshop.
324
Maintenance and care

Notes on cleaning and care of the soft top
Obser vethefo llowing information:
Note s on cleaning and car eA voiding soft- top damage
Light soiling
RClean the soft top when dr y.
RRinsewit hclean water.
RNever use gasoline, thinners, tarre mo ver or stain remo ver
or other or ganic sol vents.
RRe mo vebird droppings immediatel y,as they are cor rosive
and can therefore cause the soft- topfabric toleak.
RNe ver use a high-pre ssure cleaner.
RDo not use sharp-edged equipment toremo veice and
sno w.
Norm
alto heavy
soiling
RClean the soft top with a brush and clean water.
RClean stains and other dirt with a brush and soft-top
cleaning agents recommended and appr ovedby
Mercedes-Benz.
RAlw ays brush from front toback in the direction of the
fa bric.
Fr equent cleaning reduces the soft top's resist‐
ance todirt. Torestore the ef fect, clean the soft
to p with the care products and cleaning agents
re commended and appr ovedby Mercedes-Benz.
Incor rect cleaning and care, as well as aging,
can cause the soft- top seams toleak. Ha vethe
soft-top seams sealed at a qualified specialist wo
rkshop, e.g. at your Mercedes-Benz service
cen ter.
00CE Place a suitable co verove rth e soft top if you
plan tolea vetheve hicle outside for a long
period of time.Cleaning AI RCAP
Cleaning the wind deflector
Re quirements:
RThe soft top is closed.
RApply the electric parking brake manually.
RThe ignition is switched on.
Maintenance and care 325

RNever use a high-pre ssure cleanertoclean
th e net of the wind deflector.
00BBPull button 1.
The wind deflector between the windshield
and the soft topex tends.
00BBLight soiling: clean wind deflector net 1
with a soft brush or a moist clo th.
00BBHeavier soiling: clean wind deflector net 1
with care products and cleaning agents rec‐
ommended and appr ovedby Mercedes-Benz.
00BBSubsequentl y,rinse off wi thclean water.
Cleaning the wind screen
Re quirements:
RThe soft top is open.
RApply the electric parking brake manually.
RThe ignition is switched on.
00BBPull button 1.
The AIR CAP wind screen mo ves upwards.
326
Maintenance and care

00BBCleanwindscreen net 1with a damp clo th
in conjunction with the care products and
cleaning agents recommended and appr oved
by Mercedes-Benz.
Cleaning thefo lding draft stop
Requirements:RNe ver use a high-pre ssure cleanertoclean
th e net of the wind deflector.
RObser vethe no tes on the cor rect ins tallation
and stow ing location of thefo lding draft stop
(
→page 80).
00BBClean the net of thefo lding draft stop with a
damp clo thin conjunction with the care
products and cleaning agents recommended
and appr ovedby Mercedes-Benz.
Note s on care of vehicle parts
0071
WARNING Risk of entrapment if the
windshield wipers are switch ed on while
th e windshield is being cleaned
If th e windshield wipers are set in motion
while you are cleaning the windshield or
wiper blades, you can be trapped bythe
wiper arm.
00BBAlw ays switch off the windshield wipers
and the ignition before cleaning the
windshield or wiper blades.
0071 WARNING Risk of burn s fromtailpipes
and tailpipe trim
The tailpipe and tailpipe trim can become
ve ry hot. If you come into contact with these
parts of theve hicle, you could burn yourself.
00BBAlw ays be particular lycareful around
th eta ilpipe and theta ilpipe trim.
00BBAllow theve hicle parts tocool down
before youto uch them.
Maintenance and care 327

Observethefo llowing information:
Note s on cleaning and car eA voiding vehicle damage
Wheels/rims Usewate r and acid-free wheel cleaners.
RDo not use acidic wheel cleaners toremo vebrake dust.
This could damage wheel bolts and brake components.
RTo avoid cor rosion of the brake discs and brake pads,
drive theve hicle for a few minutes af ter cleaning before
parking it. The brake discs and brake pads warm up and
dry out.
Wi ndo ws
Cleanthe windo wsonthe inside and outside using a damp
clo thand cleaning agents recommended byMercedes-Benz. Do not use dry clo
ths or abrasive or sol vent-based cleaning
agents toclean the inside of windo ws.
Wi per blades
Fold out the wiper blades and clean them using a damp clo th.D o not clean the wiper blades too of ten.
Ex terior lighting
Cleanthe windo wswith a wet sponge and mild cleaning
agent, e.g. car sha mpoo. Only use cleaning agents or cleaning clo
thsth at are suitable
fo r plast ic covers.
Sensors Cleanthe sensors in the front and rear bumper and in the
ra diator grille with a soft clo thand car shampoo. When using a high-pressure cleaner, mainta
in a minimum dis‐
ta nce of 11.8 in (30 cm).
328
Maintenance and care