brake MERCEDES-BENZ E-CLASS COUPE 2009 Manual PDF

In these situations, it is better to get in
touch with
aqualified specialist workshop,
e.g. aMercedes-Benz Service Centre. G
Risk of injury
Remove wristwatches and any jewellery such
as rings or bracelets. You could otherwis eget
caught, injured and damage the vehicle.
Alwaysg rip the soft top at the indicated grip-
ping points when closing the soft top man-
ually. You could otherwis ebeinjured.
X Depress the parking brake.
X Open the side windows.
X Lower the head restraints (automatically:
(Y page 69) or manually:( Ypage 257)).
X Remove the key from the ignition lock.
X Open the boot.
X Take the two straps out of the vehicle tool
kit (Y page 207).
X Take the hex-socket wrench out of the
Owner's Manualw allet and keep it with
you. X
To open the cover on the left hand side
in the boot: turn rotary catch 0046anti-
clockwise and fold down cover 0047. X
Insert hex-socket wrench 008Ainto valve
screw 0088on the hydraulicp ump.
X Turn valve screw 0088on the hydraulicp ump
using hex-socket wrench 008Aone full turn
anti-clockwise. Example: left trim in the boot
X
On both sides of the boot, tear trim 0086
along the perforatio ninthe direction of the
arrow. Example: left trim in the boot
X
On both sides,b ehind the trim, pullo ut
catch 0087as far as it willgoa nd turn it Locking/unlocking in an emergency
251Practical advice
207_AKB; 2; 3, en-GB
mkalafa,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 251 Z

0079
To lock
X Insert the hex-socket wrench into the roof
lock.
X Turn the hex-socket wrench anti-clockwise
0079 as far as possible.
X Have the soft-top mechanism repaired
immediately at aqualified specialist work-
shop, e.g. aMercedes-Benz Service
Centre.
i Press the soft-top compartment cover
again if the boot lid cannot be opened.
! Do not under any circumstances open the
boot lid with the emergenc ykey. You could
otherwise damage the boot lid and the soft-
top compartment cover. Boot
! The boot lid swings upwards when
opened. Therefore, make sure that there is
sufficient clearance above the boot lid.
If the boot can no longer be unlocked with the
key or KEYLESS GO*:
X Remove the emergenc ykey element from
the key (Y page 249). X
Insert the emergenc ykey element into the
boot lid lock as far as the stop.
X Turn the emergenc ykey element anti-
clockwise as far as it will go to position
004A and pull the boot lid handle.
The boot is unlocked.
X Turn the emergenc ykey element back and
remove it. Releasing the parking lock manually
(vehicles with automatic transmis-
sion*)
In the event of an electrical fault, it is possible
to release the selector lever lock manually to
move it out of position P,e.g. if you wish to
tow the vehicle away. X
Depress the parking brake firmly.
X Prise out selector lever gaiter 0046with aflat,
blunt object ,(e. g. ascrewdriver wrapped Locking/unlocking in an emergency
255Practical advice
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 255 Z

Replacing the wiper blades
G
Ris
kofa ccident
The windscreen will not longer be wiped prop-
erl yift he wiper blades are worn. Thi scould
prevent yo ufrom observing the traffic condi-
tions ,thereby causing an accident. Replace
the wiper blades twice ayear, ideall yinspring
and autumn. G
Ris
kofa ccident
The wiper arm scould star tmoving and cause
an injury if yo uleave the windscreen wipers
switched on.
Remove the key from the ignition lock before
replacing the wiper blades.
! To avoid damaging the windscreen wiper
blades, make sure that yo utouch only the
wiper arm of the windscreen wiper. To remove
X Remove the key from the ignition lock or
turn the key to position 0(KEYLESS-GO).
X Fol dthe wiper arm away from the wind-
screen unti litengages.
X Set the wiper blad eatright angle stothe
wiper arm. X
Remove the wiper blad efrom the retainer
on the wiper arm in the direction of the
arrow. Fitting
X Slide the new wiper blad einto the retainer
on the wiper arm in the opposite direction
to the arrow.
X Turn the wiper blad eparalle ltot he wiper
arm.
X Fol dthe wiper arm back onto the wind-
screen. Flat tyre
Flat tyre equipmen
tvariants
Your vehicl emay be equipped with:
R aT IREFIT kit (Y page 207)
R a" Minispare" emergency spare wheel*
(Y page 208)
R the MOExtended run-flat sys-
tem* (Y page 272) Preparing the vehicle
i Vehicl epreparation is not necessary on
vehicles with MOE tyres*.
X Stop the vehicl easfar away as possible
from traffic on solid ,non-slipper yand level
ground.
X Switch on the hazard warning lamps.
X Firmly depres sthe parking brake.
X Vehicles with manual transmission:
engage firs torreverse gear.
X Vehicles with automati ctransmis-
sion*: move the selector lever to P.
X All occupants mus tget ou tofthe vehicle.
Make sure that they are not endangered as
they get ou tofthe vehicle.
X Make sure that no one is nea rthe danger
are aw hilst awheel is being changed .Any-
one wh oisnot directl yassisting in the
wheel change should, for example, stand
behind the barrier.
X Switch off the engine. Flat tyre
263Practical advice
*optional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 263 Z

X
Position jack 008Aat jacking point 0047. X
Make sure that the base of the jack is posi-
tioned directly under jacking point 0047.
X Turn crank 0088until the tyre is raised amax-
imum of 3cmfrom the ground. X
Unscrew the uppermost wheel bolt com-
pletely.
X In place of the wheel bolt, screw centring
pin 0086from the vehicle tool kit into the
thread.
X Unscrew the remaining wheel bolts fully. !
Do not place wheel bolts in sand or dirt.
The threads of the wheel bolts and wheel
hubs could otherwise be damaged when
the bolts are tightened.
X Remove the wheel.
Fitting anew wheel G
Risk of accident
Replace damaged or corroded wheel bolts.
Never oil or grease wheel bolts. This could
cause the bolts to loosen in the wheel hub. G
Risk of accident
If aw heel hub thread is damaged, you must
not drive the vehicle any further .Consult a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use aMercedes-Benz
Servic eCentre or Servic e24h for this pur-
pose. In particular, work relevant to safety or
on safety-related systems must be carried out
at aq ualified specialist workshop. G
Risk of accident
Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety rea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been
approved for Mercedes-Benz vehicles and the
respective wheel. Other wheel bolts could
work loose or damage the brake system.
Do not tighten the wheel bolts completely
while the vehicle is still jacked up. The vehicle
could topple off the jack.
X Clean the wheel and wheel hub contact
surfaces. Flat tyre
271Practical advice
207_AKB; 2; 3, en-GB
mkalafa, Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 271 Z

G
Risk of injury
There is ariskofa cidb urns whe njump-start-
ing avehicle du etothe gases which escape
from the battery .Donot lean over the battery
while the engine is being jump-started. G
Risk of explosion
Gases escaping from the battery during jump-
starting may cause mino rexplosions. Avoid
creating sparks. Kee pnaked flames away
from the battery ,and do not smoke.
Compl ywiths afety precautions and take pro-
tective measures whe nhandling batteries. You will find these under "Battery
"inthe
index.
X Make sure that the two vehicle sdonot
touch.
X Appl ythe parking brake firmly.
X Manual transmission: engage neutral.
X Automatic transmission*: shift the trans-
missio ntoposition P.
X Switch off al lelectrical consumers (e.g.
radio, blower, etc.).
X Ope nthe bonne t(Ypage 180). X
Slide cover 0046of positive terminal 0047in
the direction of the arrow .
X Connect positive terminal 0047on your vehi-
cle to positive terminal 008Aof dono rbattery
0087 using the jump lead ,beginning with your
ow nb attery.
X Start the engine of the dono rvehicle and
run it at idling speed.
X Connect negative terminal 0088of dono rbat-
tery 0087to earth point 0086of your vehicle
using the jump lead ,connecting the jump
lead to dono rbattery 0087first.
X Start the engine. X
First, remove the jump lead from earth
point 0086and negative terminal 0088,then
from positive terminal 0047and positive ter-
minal 008A,eacht ime disconnecting from the
battery on your ow nvehicle first.
X Have the battery checke dataqualified
specialist workshop, e.g. aMercedes-Benz
Service Centre. Jump-starting
277Practical advice
*optional
207_AKB
;2;3,en-GB
mkalafa ,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 277 Z

Towin
gand tow-starting Points to remember
G
Ris
kofa ccident
If yo uhavet he vehicl etowed ,you must us ea
rigid towing ba rif:
R the engine is not running.
R there is abrake system malfunction.
R there is amalfunctio ninthe powe rsupply
or the vehicle's electrical system.
The powe rsteerin gand the brake force boos-
ter do not work when the engine is not run-
ning .Greate rbraking force will the nbe
required and brake peda ltravel will be longer.
If necessary ,dep ress the brake peda lwithf ull
force.
Before towing away ,makes uret ha tthe steer-
ing can be moved and is not locked.
If yo utow or tow-start anothe rvehicle, its
weight must not exceed the maximum per-
missibl egross vehicl eweigh tofy ourvehicle. G
Ris
kofa ccident
The vehicl eisbraked when the HOLD function
or DISTRONI CPLUS* is activated .Therefore,
deactivate HOLD and DISTRONI CPLUSift he
vehicl eistobet owed.
It is better to have the vehicl etransported
tha ntoh aveitt owed.
When towing ,obs erve the lega lrequirements
in al lcountrie sconcerned.
! When towing ,pulla wa yslowly and
smoothly. If the tractiv epower is too high,
the vehicles could be damaged.
! Do not us ethe towing ey efor recovery,
as thi scould damage the vehicle. If in
doubt, recover the vehicl ewithac rane.
! Youm aytow the vehicl efor am aximum
of 50 km. Atowing spee dof50k m/h must
not be exceeded.
For towing distances ove r50km, the entire
vehicl emustbel ifted up and transported. !
On vehicles with KEYLESS-GO *, usethe
key instea dofthe Start/Stop button. Turn
the key to position 2in the ignition lock and
shift the automatic transmission to N.Then
tur nthe key back to 0and leav eitinthe
ignition lock.
! Onlysecur ethe tow cable or towing bar
to the towing eyes .You could otherwise
damage the vehicle.
R Vehicle swithana utomatic transmission*
must not be tow-started.
R If yo uaretowing the vehicl eoveral onger
distance, thi smustbed onew itht he rear
axl eraised.
R Th eign ition must be switched off if yo uare
towing the vehicl ewitht he rea raxler aised.
Otherwise, interventio nbyESP®
could
damage the brake system.
R If the vehicl ehassuffered transmission
damage ,onlyt ow it with the propeller shaft
disconnected.
R If the engine does not start, try jump-start-
ing it (Y page 276).
R If it is not possibl etojump-star tthe vehicle,
have it towed to the neares tqualified spe-
cialist workshop ,e.g.aM ercedes-Benz
Service Centre.
R Th ea utomatic transmission* must be in
position Nwhen the vehicl eisbeing towed.
R Before towing the vehicle, make sure that
the battery is connected and charged. Oth-
erwise:
-yo uc annot switch on the ignition.
- yo uc annot shift the transmission to posi-
tion Non vehicles with automatic trans-
mission*.
- yo uh avenos upport when braking.
i Switch off the automatic locking feature
befor ethe vehicl eistowed (Y page 120).
Otherwise, yo ucould be locked ou twhen
pushing or towing the vehicle. 278
Towin
gand tow-startingPractical advice
*optional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 278

Vehicl
eidentificatio nnumber (VIN)
In additio ntobeing stampe donthe vehicle
identificatio nplate ,t he vehicl eide ntification
numbe r(VIN) is also stampe donto the vehicle
body .Itisloc ate dont he floor in front of the
right-hand front seat. X
Slide the right-hand front sea ttoits rear-
mos tposition.
X Slightl yraise front floor covering 008Aand
fol df loor covering flap 0046upwards.
Yo uw ills ee vehicl eide ntificatio nnumber
(VIN) 0047. Engine number
The engine numbe risstampe donthe crank-
case. Mor einformatio ncan be obtained from
any Mercedes-Benz Service Centre. Servic
eproducts and capacities
Service products includ ethe following:
R fuels (e.g. petrol ,diesel)
R lubricants (e.g. engine oil, transmission oil)
R coolant
R brake fluid
R windscree nwashe rc oncentrate
Mercedes-Benz recommends tha tyou use
products which have been teste dand spe-
ciall yapproved by Mercedes-Benz for your vehicl
eand ar elisted in this Mercedes-Benz
Owner' sManualint he relevant chapte ras:
R parts and service products ar ematched
R damage caused by the us eofnon-approved
service products is not covered by the
implied warranty
Yo uc an recognise service products approved
by Mercedes-Benz by the following inscrip-
tio nont he containers:
R MB-Freigab e(e.g. MB-Freigab e229.51)
R MB Approva l(e.g. MB Approva l229.51)
Othe rdesig nations or recommendations that
relate to alev el of quality or aspecification in
accordance with an MB Shee tnumbe r(such
as MB 229.5) have not necessaril ybeen
approved by Mercedes-Benz.
Yo uc an obtai nfurthe rinformatio nfrom any
Mercedes-Benz Service Centre. G
Ris
kofi njury
Whe nhandling ,storing and disposing of any
service products, please observe the relevant
regulations, as yo ucould otherwise endanger
yoursel fand others.
Kee pservice products away from children.
To protect your health ,donot allo wservice
products to come into contact with your eyes
or open wounds. See adoctor immediatel yif
any service product is swallowed. H
Environmental note
Dispose of service products in an environ-
mentally-responsibl emanner. Fuel
G
Ris
kofe xplosion
Fue lish ighl yf lammable. Fire ,nake dflames
and smoking are therefore prohibited when
handling fuels.
Before refuelling, turn off the engine and the
auxiliary heating *. Service products and capacities
287Technical data
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 287 Z

G
Risk of accident
If the boiling point of the brake fluid is too low,
vapou rpockets may form in the brake system
whe nthe brakes are applie dhard( e.g .when
driving downhill) .Thisw ould impai rbraking
efficiency.
Have the brake fluid renewed every two years
with abrake fluid that ha sbeena pproved by
Mercedes-Benz and have this confirmed in
the Service Booklet.
The warranty is only valid if yo uhavet he vehi-
cle topped up with an antifreeze/corrosion
inhibitor which ha sbeena pproved by
Mercedes-Benz.
i There is usuall yanotice in the engine
compartment to remind yo uwhent he next
brake fluid change is due. Windscree
nwasher system
The headlamp cleaning system* and wind-
scree nwashe rsystem are both supplie dfrom
the washe rfluid reservoir.
Further information on windscreen washer
fluid and its mixing rati o(Ypage 183). Vehicl
edata, E200 CGI BlueEFFI-
CIENCY Vehicl
edimensions Vehicl
elen gth (ECE) Coupé
4698 mm
Cabriolet
4698 mm
Vehicl
ewidth including exterio rmirrors Coupé
2028 mm
Cabriolet
2015 mm Vehicl
edimensions Vehicl
eheight 47 Coupé
1393 mm
Cabriolet
1398 mm
Whee
lbase Coupé
2760 mm
Cabriolet
2760 mm
Vehicl
eweigh ts48 Unladen weight (i
naccordance with EC
Directive), manual transmission Coupé
Cabriolet
Unladen weight (i
naccordance with EC
Directive), automati ctransmission Coupé
Cabriolet
The unladen weigh
tincludes the driver
(68 kg), luggage (7 kg) and al lfluid s(fuel
tank 90% full) .Items of optional equipment
increas ethe unladen weigh tand reduce the
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specific weigh
tinformation can be
found on the vehicle identification plate
(Y page 286). 47
The value sspecified may differ from the actual values, depending on the tyres, load, optional equipment
and the state of the suspension.
48 Missing value sweren ot available at time of going to print. Vehicled
ata,E200 CGI BlueEFFICIENCY
291Technical data
*optional
207_AKB
;2;3,en-GB
mkalafa ,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 291 Z

Trailer loads
Al
lm odels Permissibl
etrailer
load, unbraked 750 kg Al
lm odels Permissibl
etrailer
load, braked 71 1800 kg
Maximum drawbar
noseweight
72 75 kg
Permissibl
erear axl eloa dw hent owin gatrailer Coupé Cabriolet
Manual trans-
mission Automatic
transmission Manual trans-
mission Automatic
transmission E2
00 CGIBlueEFFI-
CIENCY 1130 kg 1135 kg 1190 kg 1205 kg
E2
50 CGIBlueEFFI-
CIENCY – 1140 kg – 1210 kg
E3
5073 – 1150 kg – 1230 kg
E3
50 CGIBlueEFFI-
CIENCY – 1155 kg – 1235 kg
E5
00 – 1170 kg – 1240 kg
E2
20 CDIBlueEFFI-
CIENCY 1155 kg 1160 kg 1225 kg 1235 kg
E2
50 CDIBlueEFFI-
CIENCY 1165 kg 1165 kg 1235 kg 1240 kg
E3
50 CDIBlueEFFI-
CIENCY – 1155 kg – 1235 kg
24-GHz radar sensor system (country
overview)
The 24 GHz rada rsensor system requires
separate approva lfor each country .When
yo ua redriving in acountry in which the radar
sensor system is not approved ,you must
deactivate the system using the on-board
compute r(Ypage 120) .The current country
overview can be obtained fro maMercedes-
Benz Service Centre. The rada
rsensor system is automatically
deactivated nea rradio telescop efacilities .If
Distroni cPlus* or PRE-SAFE ®
Brake* are
activated at thi spoint, acorresponding warn-
ing will appear in the multi-functio ndisplay to
tel lyou tha tthe rada rsen sor system is being
switched off .BAS PLUS* is also no longer
available. If the deactivatio ndoesn ot occur
automatically, yo umustd eactivate the radar
sensor system using the on-board computer
(Y page 120). 304
24-GHz radar sensor system (country overvie
w)Technica ldata
*optional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 304