charging MERCEDES-BENZ E-CLASS ESTATE 2021 Owner's Manual

T
T
ype 2 v
ype 2 v ehicle soc ket
ehicle soc ket #
Unlo cktheve hicle.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Remo vethech arging cable connector from
th eve hicle soc ket within 30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again and thech arging
process will resume.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop. #
Char
Char ging at a mains soc ke
ging at a mains soc ket (mode 2):
t (mode 2): discon-
nect the mains plug from the mains soc ket
and st owthech arging cable safely in theve hi-
cle (/ page 210). #
Char
Char ging at a w
ging at a w allbo
allbox/c
x/char
harging st
ging st ation (mode
ation (mode
3) wit
3) wit hout pr
hout pr e-inst
e-installed c
alled c har
harging cable:
ging cable:
re mo vethech arging cable connector from the
wa llbox soc ket and st owthech arging cable
safely in theve hicle (/ page 210). #
Close the soc ket co ver and the soc ket 0ap.
% ATer thech arging cable connector has been
disconnected, the leT % indicator lamp 1
on theve hicle soc ketre mains lit for some
time before switching o.. F
F
unction of t
unction of t he c
he charg
harg e lev
e lev el displa
el displa y in t
y in t he Ins
he Instr tru-
u-
ment Display
ment Display 1
Current charge level
2 Time at which comple tely ch arged
3 Predicted charge leve l at pre-selected depar-
ture time
4 Current charging capacity
When theve hicle is connected tothe mains sup-
ply and is switched o., the Instrument Display
sho ws th ech arge leve l display for appr oximately
two minutes.
The value for cur rent charging capacity 4may
di.er from the display on thech arging station. At Driving and parking
221 221

%
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R
R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
clus ter goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment clus ter. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a park ed
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, forex ample, in a
two-s tore yga rage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact, for
ex ample, if an outside mir ror is torn o. or the
paint is damaged byakey
R an impact occurs at low speed R
the electric parking brake is not applied N No
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
% Further information can be obtained at a
qu ali/ed specialist workshop. S
S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion.
St andby mode is characterised bythefo llowing:
R The star ter battery is preser ved.
R The maximum non-operational time appears in
the media displa y.228 228
Driving and parking

#
Do not lock or unlock theve hicle. R
R
eq
eq uir
uir ements:
ements:
R The ball neck is extended and engaged in a
securely loc ked position.
R All-T
All-T err
errain v
ain v ehicles:
ehicles: couple up the trailer in the
Comfort drive prog ram A. (/ page 197)
R All-T
All-T err
errain v
ain v ehicles:
ehicles: ensuretheve hicle is at
th e normal le vel. (/ page 266)
Tr ailers with a 7-pin plug can be connected tothe
ve hicle with thefo llowing adap ters:
R Adapter plug
R Adapter cable
The trailer will be cor rectly de tected bytheve hi-
cle only if thefo llowing conditions are met:
R The trailer is connected cor rectl y.
R The trailer lighting system is in working order.
The functions of thefo llowing systems will be
a.ec tedbya cor rectly connected trailer:
R ESP ®
trailer stabilisation
R Trailer Manoeuvering Assist R
Active Lane Keeping Assist
R Parking Assist PARKTRONIC
R Active Parking Assist
R Blind Spot Assist or Active Blind Spot Assist
R Drive Away Assist
R Cross Tra1c Ale rt
R Reversing camera
R 360° camera
R AIR BODY CONTROL
Coupling up a tr
Coupling up a tr ailer
ailer
* NO
NOTE
TEDamage tothe star ter battery due
to full dis charge Charging
the trailer battery using the po wer
supply of the trailer can damage the star ter
batter y. #
Do not use theve hicle's po wer supply to
ch arge the trailer batter y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. #
Position the trailer on a le vel sur face behind
th eve hicle and couple it up totheve hicle. #
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. Driving and parking
291
291

Plug-in h
Plug-in h
ybr
ybr id se
id se ttings
ttings Con/gur
Con/gur
ing
ingse
settings f
ttings f or plug-in h
or plug-in h ybr
ybrid v
id v ehicles
ehicles Multimedia system:
4 © 5
EQ
Se
Se tting t
tting t he c
he char
harging pr
ging pr ocess
ocess #
Select Departure time.
The following charging times can be selected:
R Once
R Week profile #
Select a setting.
Se
Se tting a single depar
tting a single depar tur
ture time
e time #
Select Departure time . #
Select Edit single time . #
Set a departure time.
Se
Se tting t
tting t he w
he week
eekpr
pro/le
o/le #
Select Departure time . #
Select Edit week profile. #
Add new time #
Set the desired departure times, e.g. every
day at 8 a.m. #
Select a.
Se
Se tting t
tting t he maximum c
he maximum c har
harging curr
ging curr ent
ent #
Select Maximum charge current. #
Select Maximum, 8 ampsor6 amps.
When the battery is charge d, thech arging cur-
re nt is limi tedto the selected amperage.
% For saf etyre asons, only use thech arging
cable supplied with theve hicle or an original
Mercedes-Benz charging cable. Mercedes-
Benz thoroughly tests these original charging
cables forth eir suitability forth e high-voltage
ch arging of your vehicle. Pur chase these parts
from your Mercedes-Benz Service Centre and
obtain advice there.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating r
ating rout
oute-based oper
e-based oper ating
ating
mode s
mode str trat
at egy
egy #
Select Electric in city .
Depending on the pr evious status, the func-
tion is activated or deactivated. Calling up t
Calling up t
he ener
he energy
gy0ow
0ow display
display Multimedia system:
4 © 5
EQ #
Select Energy flow.
The visualisation of the energy 0ow in theve hi-
cle is displ ayed.
In addition tothe energy 0o w,information on the
status of thehy brid system and the cur rent state
of charge ofthe high-voltage battery is also dis-
pla yed. MBUX multimedia system
341
341

can
restrict functions releva nt for saf ety sys-
te ms and impair the operating saf ety of your
ve hicle.
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R when braking
R intheev ent of abrupt steering manoeuvres
and/or when theve hicle's speed is not
adap tedto thero ad conditions #
Intheev ent of a short circuit or a similar
incident, contact a quali/ed specialist
wo rkshop immediatel y. #
Do not drive on. #
Always ha veworkon the battery car ried
out at a quali/ed specialist workshop. R
Further information on ABS (/ page 231)
R Further information on ESP ®
(/ page 232)
Fo r saf etyre asons, Mercedes-Benz recommends
th at you only use batteries which ha vebeen tes-
te d and appr ovedfo ryo ur vehicle byMercedes-
Benz. All v
All v ehicles ex
ehicles excep
cep t v
t vehicles wit
ehicles wit h a lit
h a lithium-ion bat-
hium-ion bat-
t
t ery
ery &
W
WARNING
ARNING Risk ofexplosion due toelec-
trostatic charge
Electrostatic charge can ignite the highly
ex plosive gas mixtu reinthe batter y. #
Todischar geany elect rostatic charge
th at may ha vebuilt up, touch the me tal
ve hicle body before handling the batter y. The high
ly0ammable gas mixtu reis created while
th e battery is charging and during starting assis-
ta nce. &
W
WARNI NG
ARNI NGDanger of chemical burns from
th e battery acid
Battery acid is caustic. #
Avoid contact with the skin, eyes or
clo thing. #
Do not lean overth e batter y. #
Do not inhale battery gases. #
Keep children away from the batter y. #
Immediately rinse bat tery acid o. thor-
oughly with plenty of clean water and
seek medical attention immediatel y. All v
All v
ehicles
ehicles
+ ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmental
damage due toimproper disposal of bat-
te ries Batteries contain pollutants. It is
illegal todispose of them with the household
ru bbish. #
Dispose of batteries in an
environmentally responsible manner.
Ta ke dischar ged batteries toaqu ali/ed
specialist workshop or toa collection
point for used batteries. Breakdown assistance
397
397

If
yo u ha vetodisconnect the 12 V batter y,con-
ta ct a quali/ed specialist workshop.
Comply with saf ety no tes and take protective
measures when handling batteries. Risk of
explosion. Fire
, naked 0ames and smoking are
prohibi ted when handling the batter y.
Av oid creating spar ks. Electrolyte or battery acid is cor
rosive.
Av oid contact with the skin, eyes or
clo thing. Wear suitable pr otective
clo thing, in particular glo ves, an apron
and a face mask. Immediately rinse
electrolyte or acid splashes o. with
clean water. Consult a doctor if neces-
sar y. We
ar saf ety glasses. Ke
ep children away. Obser
vethis Owner's Manual.
Obser vethefo llowing if you do not intend touse
th eve hicle over an extended period of time:
R Activate standby mode.
R Alternativel y:connect the battery toa battery
ch arge r appr ovedby Mercedes-Benz or con-
sult a quali/ed specialist workshop todiscon-
nect the batter y. N N
o
ot
tes on st
es on st ar
arting assist
ting assist ance and c
ance and c har
harging t
ging t he 12
he 12
V batt
V batt ery
ery All v All v
ehicles
ehicles
When charging the battery and during starting
assistance, alw ays use the jump-start connection
point in the engine compartment. *
N
NOOTE
TE Damage tothe battery from over-
vo ltage When
charging using a battery charge r without
a re striction of the maximum charging voltage,
th e battery or the on-board electronics can be
damaged. #
Only use battery charge rs with a maxi-
mum charging voltage of 14.8 V. &
W
WARNI NG
ARNI NGRisk of explosion due tohydro-
ge nga s igniting
If, when charging a batter y,there is a short
circuit or spar ksstart toform ,th ere is a dan-
ge r of hydrogen gas igniting. #
Take care that the positive clamp con-
nected toa battery does not come into
contact with vehicle parts. #
Never place me tal objects or tools on a
batter y. #
When connecting and disconnecting the
batter y,alw ays obser vethe sequence of
battery clamps described. 398
398
Breakdown assistance

#
Take care toonly connect battery term i-
nals of identical polarity when receiving
starting assistance. #
Obser vethe sequence described for
connecting and disconnecting the jump
leads when receiving starting assistance. #
Do not connect or disconnect the bat-
te ry term inals while the engine is run-
ning. &
W
W ARNI NG
ARNI NGRisk of explosion due toexplo-
sive mixture of gases
An explosive mixture of gases can escape
from the battery during charging and starting
assis tance. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Make sure there is adequate ventilation. #
Do not stand overth e batter y. &
W
WARNI NG
ARNI NGRisk of explosion from a frozen
battery
A dischar ged battery may freeze at temp era-
tures slightly abo veor below freezing point.
During starting assistance or battery charging,
battery gas can be released. #
Always allow a battery tothaw before
ch arging it or per form ing starting assis-
ta nce. If
th e indicator/warning lamps in the inst rument
clus ter do not light up at low temp eratures, it is
ve ry likely that the dischar ged battery has frozen.
In this case you may neither jump-start theve hi-
cle nor charge the batter y.
The service life of a bat tery that has been thawed
may be dramatically shor tened. The starting char-
acteristics may be impaired, especially at low
te mp eratures.
It is recommended that you ha veath awe d battery
ch ecked at a quali/ed specialist workshop. V
V ehicles wit
ehicles wit h plug-in h
h plug-in hybr
ybrid:
id:
If yo ur vehicle has been star ted with starting
assistance, it may not be possible touse the elec-
tric drive for appr oximately 30 minutes.
St arting assis tance is not considered tobe a nor-
mal operating condition.
All v All v ehicles
ehicles
* NO
NOTE
TEDamage caused bynume rous or
ex tended attem ptsto start the engine Numerous or
extended attem ptsto start the
engine may damage the catalytic con verter
due tonon-combusted fuel. #
Avoid numerous and extended attem pts
to start the engine. Obser
vethefo llowing points during starting assis-
ta nce and when charging the batter y:
R Only use undamaged jump lead/charging
cables with a su1cient cross-section and
insulated term inal clamps.
R Non-insulated parts of thete rm inal clamps
must not come into contact with other me tal Breakd
own assistance
399 399

parts while
the jump lead/charging cable is
connected tothe battery/jump-start connec-
tion point.
R The jump lead/charging cable must not come
into contact with any parts which may mo ve
when the engine is running.
R Always make sure that nei ther you nor the bat-
te ry is electrostatically charge d.
R Keep awa y from /re and naked 0ames.
R Do not lean over the batter y.
Obser vethe additional following points when
ch arging the batter y:
R Only use battery charge rs tested and
appro vedfo r Mercedes-Benz.
R Read the battery charge r's operating inst ruc-
tions before charging the batter y.
Obser vethe additional following points during
starting assistance:
R Starting assis tance may only be pr ovided
using vehicles, batteries or other jump start
devices with a nominal voltage of 12 V.
R The vehicles must not touch. R
V Vehicles wit ehicles wit h a pe
h a petr
trol engine:
ol engine: jump-start the
ve hicle only when the engine and exhaust sys-
te m are cold. S
S
t
tar
ar ting assist
ting assist ance and c
ance and c har
harging t
ging t he 12 V batt
he 12 V batt ery
ery R
R
eq
eq uir
uir ements:
ements:
R The vehicle is secured with the electric par k-
ing brake.
R V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: the
transmission is in position j.
R The vehicle and all elect rical consume rsare
switched o..
R The bonnet is open. Example: engine compartment
#
Slide co ver1 of positive contact 2onthe
jump-starting connection point in the direction
of the ar row. #
Connect positive contact 2onyour vehicle
to the positive term inal of the donor battery
using the jump lead/charging cable. Alw ays400
400
Breakdown assistance

begin with positive contact
2onyour own
ve hicle /rst. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:startthe engine of
th e donor vehicle and run at idle speed. #
Connect the negative term inal of the donor
battery and ear thpoint 3ofyour ow nve hicle
by using the jump lead/charging cable. Begin
with the donor battery /rst. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:startthe engine of
yo ur ow nve hicle. #
Dur
During t
ing t he c
he char
harging pr
ging pr ocess:
ocess: startthech arg-
ing process. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:letthe engines run
fo r se veral minutes. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:before disconnect-
ing the jump lead, switch on an electrical con-
sumer on your ow nve hicle, e.g. there ar win-
dow heater or lighting.
When the starting assistance/charging process is
comple te, per form thefo llowing steps: #
Firs t, re mo vethe jump lead/charging cable
from ear thpoint 3and the negative term inal of
the donor batter y,then from positive con-
ta ct 2 and the positive term inal of the donor
batter y.Begin ea chtime with the contacts on
yo ur ow nve hicle /rst. #
ATer removing the jump lead/charging cable,
close co ver1 of positive contact 2.
If yo ur vehicle has been star ted with starting
assistance, it may not be possible touse the elec-
tric drive for appr oximately 30 minutes.
Fu rther information can be obtained at a quali/ed
specialist workshop. R
R
eplacing t
eplacing t he 12 V batt
he 12 V batt ery
ery #
Obser vethe no tes on the 12 V battery
(/ page 396).
Mercedes-Benz recommends that you ha vethe
12 V battery replaced at a quali/ed specialist
wo rkshop, e.g. at a Mercedes-Benz Se rvice
Centre. Obser
vethefo llowing no tes if youwa nttoreplace
th e battery yourself:
R Alwaysre place a faulty battery with a battery
which meets the speci/c vehicle requ ire-
ments.
The vehicle is equipped with an AGMtech nol-
ogy bat tery (Absorbent Glass Mat) or a lith-
ium-ion batter y.Fu llve hicle functionality is
only guaranteed with an AGM bat tery or lith-
ium-ion batter y.Fo r saf etyre asons, Mercedes-
Benz recommends that you only use batteries
which ha vebeen tested and appro vedfo ryo ur
ve hicle byMercedes-Benz.
R Carryove r de tach able parts, such as vent
hoses, elbow /ttings or term inal co vers from
th e battery being replaced.
R Make sure that theve nt hose is alw ays con-
nected tothe original opening on the side of
th e batter y.
Fi t any existing or supplied cell caps.
Otherwise, gases or battery acid could
escape.
R Make sure that de tach able parts are recon-
nected in the same way. Breakd
own assistance
401 401

W
W
eights and loads (no
eights and loads (no t f
t for plug-in h
or plug-in h ybr
ybrid)
id) R R
oof load oof load Model
Model
Maximum r
Maximum roof load
oof load
All models 100 kgHigh-v
High-v
olt
oltag
age batt
e batt er
ery (plug-in h
y (plug-in h ybr
ybrid)
id) N
No
ot
tes on t
es on t he pow
he pow er suppl
er suppl y f
y for v
or v ehicles wit
ehicles wit h a
h a
high-v
high-v olt
olt ag
age batt
e batt ery
ery
In accordance with European standard EN
17186:2019, vehicle identi/ers are located on the
ve hicle in thefo llowing places:
R Onthe inside of the soc ket 0ap
R Onthech arging cable connector 1
Supply type: AC
St andard: EN 62196-2
St yle: type 2
Plug type: charging cable soc ket and vehicle
plug
Fo r fur ther information on charging the high-volt-
age batter y,referto the "Charging the high-volt-
age battery" section (/ page 210).
Missing values werenot available at the time of
going topress. Maximum batt
Maximum batt er ery capacity and c
y capacity and c har
harging times
ging times All models
All models
Ty
pe Lithium-ion
Maximum energy content 13.5 kWh
Ra nge in electric-only mode
Cha rge time – mode 3
with 7.4 kW charging capacity App
rox. 1 h
30 min
Char getime – mode 2
with 3.7 kW charging capacity App
rox. 2 h
45 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 5 h
Char getime – mode 2
with 1.8 kW charging capacity App
rox. 6 h
30 min Char
getimes – modes 2 and 3 app lyto alternat-
ing cur rent charging from 10% to100% of the usa-
ble energy content.
The time take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem- Te
ch nical data
445 445