lights MERCEDES-BENZ E-CLASS ESTATE 2021 Owner's Manual

Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 1
1 Display
Display
Meaning
Meaning
% Lights up
whiteR
The vehi-
cle soc ket
is
unloc ked
R Connect
orremo ve
ch arging
cable Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Flashes
orangeConnection is
being estab-
lished
# Flashesgreen Active energy
0ow S S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Display
Display
Meaning
Meaning
# Lights up
orangeInter
ruption in
ch arging
# Lights up
green Charging
process com-
ple
ted
# FlashesredA malfunction
has occur red
during charg-
ing. The indi-
cator lamp
goes out aTer
appr oximately
90 seconds. %
Ifth e indicator lamps are o., lock or unlock
th eve hicle using thekey. The indicator lamps
will then display the cur rent status of the
ch arging process. S S
t
tar
ar ting t
ting t he c
he char
harging pr
ging pr ocess
ocess &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage totheve hicle due toove r-
vo ltage in the mains supply The
vehicle is equipped with an elect rical fuse
which pr otects it against overvoltage in the
mains suppl y.This electrical fuse may trip dur- Driving and parking
217
217

%
When thehy brid system is activated (the
õ display in the Instrument Display),
soc ket 0ap 1cannot be opened. #
Press catch 3tothe leT and fold up soc ket
co ver5. #
T
To c
o c harg
harg e at a mains soc ke
e at a mains soc ket (mode 2):
t (mode 2): insert
th e mains plug into the mains soc ket of the
ex tern al po wer source tothe stop. #
Set the maximum charging cur rent if requ ired. #
Insert thech arging cable connector into vehi-
cle soc ket2 tothe stop.
Make sure that thech arging cable is not taut
when inser ted.
Indicator lamp 40ashes orange and, as soon
as the high-voltage battery is charge d, green. #
T
To c
o c harg
harg e at a w
e at a w allbo
allbo x/c
x/char
harging st
ging st ation
ation
(mode 3):
(mode 3): insertthech arging cable connector
into vehicle soc ket2 tothe stop.
Make sure that thech arging cable is not taut
when inser ted.
Indicator lamp 40ashes orange and, as soon
as the high-voltage battery is charge d, green. When
thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arging
side is shown in the Instrument Display with a
ch arging prediction. The charging prediction
either refers to the predicted charge leve l at the
set departure time, or the time at which the high-
vo ltage battery will be fully charge d.
T
T ype 2 v
ype 2 v ehicle soc ket
ehicle soc ket #
Press the bottom leT of soc ket 0ap 1and
swing the soc ket 0ap open outwards.
The % indicator lamp 4lights up.
% When thehy brid system is activated (the
õ display in the Instrument Display),
soc ket 0ap 1cannot be opened. #
Press catch 3tothe leT and fold up soc ket
co ver6. #
T
To c
o c harg
harg e at a mains soc ke
e at a mains soc ket (mode 2):
t (mode 2): insert
th e mains plug into the mains soc ket of the
ex tern al po wer source tothe stop. #
Set the maximum charging cur rent if requ ired. #
Insert thech arging cable connector into vehi-
cle soc ket2 tothe stop.
Make sure that thech arging cable is not taut
when inser ted.
The # indicator lamp 50ashes orange
and, as soon as the high-voltage battery is
ch arge d, green. #
Char
Char ging at a w
ging at a w allbo
allbo x/c
x/char
harging st
ging st ation (mode
ation (mode
3) wit
3) wit hout pr
hout pr e-inst
e-installed cable:
alled cable: insertthe Driving and parking
219
219

T
T
ype 2 v
ype 2 v ehicle soc ket
ehicle soc ket #
Unlo cktheve hicle.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Remo vethech arging cable connector from
th eve hicle soc ket within 30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again and thech arging
process will resume.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop. #
Char
Char ging at a mains soc ke
ging at a mains soc ket (mode 2):
t (mode 2): discon-
nect the mains plug from the mains soc ket
and st owthech arging cable safely in theve hi-
cle (/ page 210). #
Char
Char ging at a w
ging at a w allbo
allbox/c
x/char
harging st
ging st ation (mode
ation (mode
3) wit
3) wit hout pr
hout pr e-inst
e-installed c
alled c har
harging cable:
ging cable:
re mo vethech arging cable connector from the
wa llbox soc ket and st owthech arging cable
safely in theve hicle (/ page 210). #
Close the soc ket co ver and the soc ket 0ap.
% ATer thech arging cable connector has been
disconnected, the leT % indicator lamp 1
on theve hicle soc ketre mains lit for some
time before switching o.. F
F
unction of t
unction of t he c
he charg
harg e lev
e lev el displa
el displa y in t
y in t he Ins
he Instr tru-
u-
ment Display
ment Display 1
Current charge level
2 Time at which comple tely ch arged
3 Predicted charge leve l at pre-selected depar-
ture time
4 Current charging capacity
When theve hicle is connected tothe mains sup-
ply and is switched o., the Instrument Display
sho ws th ech arge leve l display for appr oximately
two minutes.
The value for cur rent charging capacity 4may
di.er from the display on thech arging station. At Driving and parking
221 221

#
Point remo tecont rol6 from a distance of
1 cm to8 cm towa rds button 1,2or3. #
Press and hold button 5ofremo tecont rol
6 until one of thefo llowing signals appears:
R Indicator lamp 4lights up green continu-
ousl y.Prog ramming is comple te.
R Indicator lamp 40ashes green. Prog ram-
ming was successful. Additionall y,syn-
ch ronisation of thero lling code with the
door system must be car ried out. #
If indicator lamp 4does not light up or 0ash
gr een: repeat the procedure. #
Release all of the buttons.
% The remo tecont rolfo rth e door drive is not
included in the scope of delivery of thega rage
door opener.
Sync
Sync hr
hronising t
onising t he r
he rolling code
olling code
R
R eq
eq uir
uir ements:
ements:
R The door system uses a rolling code.
R The vehicle must be within range of thega rage
door or door drive. R
The vehicle as well as persons and objects are
located outside thera nge of mo vement of the
door. #
Press the prog ramming button on the door
drive unit.
Initiate the next step within appr oximately
30 seconds. #
Press pr eviously prog rammed button 1,2
or 3 repeatedly until the door closes.
When the door closes, prog ramming is com-
ple ted.
% Please also read the operating inst ructions for
th e door drive.
T T r
roubleshoo
oubleshoo ting when pr
ting when progr ogramming t
amming t he r
he remo te
emo te
contr
contr ol
ol #
Check if the transmitter frequency of remo te
cont rol6 is suppor ted. #
Replace the batteries in remo tecont rol6. #
Hold remo tecont rol6 atvarious angles from
a distance of 1 cm to8 cm front of the inside
re arview mir ror.Yo u should test every position
fo r at least 25 seconds before trying ano ther
position. #
Hold remo tecont rol6 atthe same angles at
va rious distances in front of the inside rear
view mir ror.Yo u should test every position for
at least 25 seconds before trying ano ther
position. #
Onremo tecont rolsth at transmit only for a
limited period, press button 5onremo te
cont rol6 again before transmission ends. #
Angle the aerial line of thega rage door opener
unit towa rdsth ere mo tecont rol.
% Support and additional information on pro-
gramming:
R Onthe HomeLink ®
Hotline on (0) 08000
466 354 65 or +49 (0) 6838 907-277
R Onthe Internet at https://
www.homelink.com
Opening or closing t
Opening or closing t he g he gar
arag
ag e door
e door
R
R eq
eq uir
uir ements:
ements:
R The cor responding button is prog rammed to
operate the door. #
Press and hold buttons 1,2or3 until the
door opens or closes. Driving and parking
225
225

#
If indicator lamp 40ashes yellow aTer
appr oximately 20 seconds: press and hold the
pr ev iously pressed button again until the door
opens or closes.
Clear
Clear ing t
ing the g
he gar
arag
ag e door opener memory
e door opener memory #
Press and hold buttons 1and 3.
Indicator lamp 4lights up yello w. #
If indicator lamp 40ashes green: release
buttons 1and 3.
The entire memory has been dele ted. Electr
Electr
ic par
ic parking br
king br ake
ake F
F
unction of t
unction of t he electr
he electric par
ic parking br
king br ak
ake (appl
e (appl ying
ying
aut
aut omaticall
omaticall y)
y) &
W
WARNING
ARNING Risk of accident and inju rydue
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. The electr
The electr
ic par
ic parking br
king br ak
ake is applied if t
e is applied if t he tr
he trans-
ans-
mission is in position
mission is in position j
jand one of t
and one of t he f
he follo
ollowing
wing
conditions is
conditions is ful/lled:
ful/lled:
R The vehicle is switched o..
R The seat belt tongue is not inse rted in the seat
belt buckle of the driver's seat and the driver's
door is opened.
% Toprev ent application: pull the handle of the
electric parking brake (/ page 227).
In t
In t he f
he f ollo
ollowing situations, t
wing situations, t he electr
he electric par
ic parking
king
br
br ak
ak e is also applied:
e is also applied:
R The HOLD function is keeping theve hicle sta-
tionar y.
R Active Parking Assist is keeping theve hicle
stationar y.
R Active Distance Assist DISTRONIC is bringing
th eve hicle toa standstill. 226
226
Driving and parking

R
In addition, one of t
In addition, one of t he f
he follo
ollowing conditions
wing conditions
mus
mus t be
t be ful/lled:
ful/lled:
- The vehicle is switched o..
- The seat belt tongue is not inse rted in the
seat belt buckle of the driver's seat and
th e driver's door is opened.
- There is a system malfunction.
- The po wer supply is insu1cient.
- The vehicle is stationary for a lengt hy
period.
When the electric parking brake is applied, the
re d! indicator lamp lights up in the inst ru-
ment clus ter.
% The electric parking brake is not automatically
applied if theve hicle is switched o. bythe
ECO start/s top function.
F
F unction of t unction of t he electr
he electric par
ic par king br
king br ak
ake (r
e (r eleasing
eleasing
aut
aut omaticall
omaticall y)
y)
The electr
The electr ic par
ic parking br
king br ak
ake is r
e is r eleased when t
eleased when t he
he
f
f ollo
ollo wing conditions ar
wing conditions ar e
eful/lled:
ful/lled:
R The driver's door is closed.
R The vehicle has been star ted. R
The transmission is in position hork and
yo u depress the accelerator pedal or you shiT
from transmission position jtoh ork
when on le velgr ound.
R Ifth e transmission is in position k,theta il-
ga te must be closed.
R The seat belt tongue is inse rted into the seat
belt buckle of the driver's seat.
If th e seat belt tongue is not inse rted into the
seat belt buckle of the driver's seat, one of the
fo llowing conditions must be ful/lled:
- You shiT from transmission position j.
or
- You ha veprev iously driven at speeds
gre ater than 3 km/h.
When the electric parking brake is released, the
re d! indicator lamp in the inst rument cluster
goes out. Appl
Appl ying/r
ying/r eleasing t
eleasing t he electr
he electric par
ic parking br
king br ake
ake
manually
manually
Appl Appl ying
ying #
Push handle 1.
The red! indicator lamp lights up in the
inst rument cluster. Driving and parking
227
227

%
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R
R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
clus ter goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment clus ter. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a park ed
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, forex ample, in a
two-s tore yga rage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact, for
ex ample, if an outside mir ror is torn o. or the
paint is damaged byakey
R an impact occurs at low speed R
the electric parking brake is not applied N No
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
% Further information can be obtained at a
qu ali/ed specialist workshop. S
S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion.
St andby mode is characterised bythefo llowing:
R The star ter battery is preser ved.
R The maximum non-operational time appears in
the media displa y.228 228
Driving and parking

R
EBD (E Electronic B Brakeforce D Distribution)
( / page 234)
R STEER CONTROL (/ page 234)
R HOLD function (/ page 235)
R Hill Start Assist (/ page 236)
R Adaptive Brake Lights (/ page 236)
R ATTENTION ASSIST (/ page 236)
R Cruise cont rol (/ page 238)
R Limiter (/ page 239)
R Tra1c Sign Assist (/ page 257)
R AIR BODY CONTROL (/ page 265)
R Trailer Manoeuv ring Assist (/ page 285)
Dr
Dr iving Assist
iving Assist ance pack
ance package
age
The following functions are part of the Driving
Assistance Package. Cer tain functions are only
av ailable in some countries. Some functions are
also available without the Driving Assistance
Pa ckage, albeit with restric ted functionality.
R Active Distance Assist DISTRONIC
(/ page 241) R
Active Speed Limit Assist (countr y-dependent)
(/ page 246)
R Route-based speed adap tation (countr y-
dependent) (/ page 247)
R Active Brake Assist (/ page 253)
R Active Steering Assist (countr y-dependent)
(/ page 250)
R Active Emer gency Stop Assist (countr y-
dependent) (/ page 252)
R Active Stop-and-Go Assist (countr y-depend-
ent) (/ page 248)
R Blind Spot Assist and Active Blind Spot Assist
with exitwa rning (/ page 259)
R Active Lane Keeping Assist (/ page 262)
P
P ar
ar king P
king P ack
ackage
age
R Reversing camera (/ page 268)
R 360° Camera (/ page 271)
R Parking Assist PARKTRONIC (/ page 275)
R Active Parking Assist (/ page 279) F
F
unctions of ABS
unctions of ABS The Anti-lock Brake System (ABS)
regulates the
brake pressure in critical driving situations:
R During braking, for instance, at maximum full-
stop braking or if there is insu1cient tyre trac-
tion, the wheels are pr evented from locking.
R Vehicle steerability while braking is ensu red.
If ABS inter venes when braking, you will feel a
pulsing in the brake pedal. The pulsating brake
pedal can be an indication of hazardous road con-
ditions and can ser veas a reminder totake extra
care while driving.
Syst
Syst em limits
em limits
R ABS is acti vefrom speeds of approx. 5 km/h.
R ABS may be impaired or may not function if a
malfunction has occu rred and theye llow !
ABS warning lamp lights up continuously in
th e inst rument clus ter aTer theve hicle is star-
te d. Driving and parking
231
231

When ESP
®
is deactivated, theå warning
lamp lights up continuousl y:
R Driving stability will no longer be impr oved.
R The drive wheels could spin.
R ETS/4ETS traction control is still active.
% When ESP ®
is deactivated, you are still assis-
te dby ESP ®
when braking.
When the÷ warning lamp 0ashes, one or se v-
eral wheels has reached its grip limit:
R Adapt your driving style tosuit the cur rent
ro ad and weather conditions.
R Do not deactivate ESP ®
.
R Only depress the accelerator pedal as far as is
necessary when pulling away.
Deactivate ESP ®
in thefo llowing situations to
impr ovetraction:
R When using snow chains.
R In deep sno w.
R On sand or grav el. %
Spinning the wheels results in a cutting
action, which enhances traction.
If th e÷ ESP®
wa rning lamp lights up continu-
ousl y,ESP ®
is not available due toa malfunction.
Obser vethefo llowing information:
R Warning and indicator lamps (/ page 517)
R Display message s (/page 449)
ET
ET S/4ET
S/4ET S (Electr
S (Electr onicTr
onic Traction Syst
action Syst em)
em)
ETS/4ETS traction cont rol is part of ESP ®
and
makes it possible topull away and accelerate on a
slippery car riag ewa y.
ETS/4ETS can impr ovetheve hicle's traction by
inter vening in thefo llowing ways:
R The drive wheels are braked individually if they
spin.
R More drive torque is tr ansferredto the wheel
or wheels with traction.
In0uence
In0uence of dr
of driv
ive pr
e pr ogr
ograms on ESP
ams on ESP ®
®
The drive prog rams enable ESP ®
to adapt todif-
fe re nt we ather and road conditions as well as the
driver's prefer red driving style. Depending on the
selected drive prog ram, the appropriate ESP ®mode will be activated.
You can select the drive
prog rams using theDY NAMIC SELECT switch
(/ page 197). F
F
unction of ESP
unction of ESP ®
®
Cr
Cr osswind Assist
osswind Assist ESP
®
Crosswind Assist de tects sudden gusts of
side wind and helps the driver tokeep theve hicle
in the lane:
R ESP ®
Crosswind Assist is active at vehicle
speeds between appr ox. 75 km/h and
200 km/h when driving straight ahead or cor-
nering slightl y.
R The vehicle is stabilised bymeans of individual
brake application on one side. F F
unction of ESP
unction of ESP ®
®
tr
trailer st
ailer st abilisation
abilisation &
W
WARNING
ARNING Risk of accident in poor road
and weather conditions
In poor road and weather conditions, the
trailer stabilisation cannot pr event lur ching of
th eve hicle/trailer combination. Trailers with a Driving and parking
233
233

high cent
reofgrav ity may tip over before
ESP ®
de tects this. #
Always adapt your driving style tosuit
th e cur rent road and weather conditions. When driving with a trailer, ESP
®
can stabilise
yo ur vehicle if the trailer begins toswer vefrom
side toside:
R ESP ®
trailer stabilisation is active abo ve
speeds of 65 km/h.
R Slight swerving is reduced bymeans of a tar-
ge ted, individual brake application on one
side.
R Intheev ent of se vere swerving, the engine
output is also reduced and all wheels are
braked.
ESP ®
trailer stabilisation may be impaired or may
not function if:
R The trailer is not connected cor rectly or is not
de tected proper lyby theve hicle. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating ESP
ating ESP®
®
(Electr
(Electr onicSt
onic Stability
ability
Pr
Pr ogr
ogr am)
am) Multimedia system:
4 © 5
Settings 5
Quick access
% ESP®
can only be activated/deactivated using
qu ick access when at least one other function
is available in quick access. ESP ®
can other-
wise be found in theAssistance menu.
* N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. #
Select ESP. #
Select Onorå Off.
% If ESP ®
is deactivated and drive prog ram
Î was pr eviously selected, drive prog ram
A is automatically activated the next time
th e engine is star ted. ESP
®
is deactivated if theå ESP®
OFF warn-
ing lamp lights up continuously in the inst rument
cluster.
Obser vethe information on warning lamps and
display message s which may be shown in the
inst rument cluster. F F
unction of EBD
unction of EBD Electronic Breakforce Distribution (EBD) is
char-
acterised bythefo llowing:
R Monitoring and regulating the brake pressure
on there ar wheels.
R Impr oved driving stability when braking, espe-
cially on bends. F F
unction of S
unction of S TEER C
TEER CONTR
ONTROL
OL ST
EER CONTROL assists youby transmitting a
noticeable steering forc eto the steering wheel in
th e direction requ ired forve hicle stabilisation. 234 234
Driving and parking