warning MERCEDES-BENZ E-CLASS ESTATE 2022 Repair Manual

#
On bo thbrac kets 5, press the locking button
4. #
T
To r
o r emov
emov e:
e:press release knob 3onthe
brac ket5 and remo veluggage holder 2by
pulling it out.
Inst
Inst alling or r
alling or r emo
emoving t
ving t he t
he t elescopic r
elescopic r od
od
Inst
Inst alling
alling
The telescopic rod is used tosecure loads against
th ere ar seats toprev ent them from moving
around. #
Insert one brac ket2 into bo th the leT and
ri ght load rails and slide it tothe desired posi-
tion. #
Press and hold there lease knob 3. #
Insert thete lescopic rod1 into the brac kets
2 and slide it down wards until it engages. #
On bo thbrac kets, press locking button 4. #
T
To r
o r emov
emov e:
e:press there lease knob 3onthe
re specti vebrac ket2 and remo vethete le-
scopic rod1 bypulling it upwards and out. A
A
tt
tt ac
ac hing a r
hing a r oof lugg
oof lugg ag
age r
e r ack
ack &
W
WARNING
ARNING Risk of accident due toexceed-
ing the maximum roof load
The vehicle cent reofgrav ity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If yo uex ceed the maximum roof load, the driv-
ing characteristics, as well as steering and
braking, will be greatly impaired. #
Neverex ceed the maximum roof load
and adjust your driving style. Yo
u will /nd information on the maximum roof
load in the "Technical data" section. Seats and st
owing
139
139

Soc
ke
Soc kets
ts Using t
Using t
he 12 V soc ket
he 12 V soc ket R
R
eq
eq uir
uir ements:
ements:
R Only connect devices up toa maximum of
180 W (15 A).
Depending on theve hicle equipment, theve hicle
has thefo llowing 12 V soc kets:
R Inthe st owage compartment in the front
centre console
R Inthe st owage compartment in the centre
console of there ar passen ger compartment
R Inthe load compartment Example: 12 V soc
ket in the st owage compartment
in the front centre console #
Brie0y press the trim element of the co ver on
th e front.
The co ver opens in the direction of the ar row. #
LiT up cap 1ofthe soc ket and insert the
plug of the device.
If yo u ha veconnected a device tothe 12 V
soc ket, lea vethe co ver of the st owage compart-
ment open. USB por
USB por
t in t
t in the r
he rear passeng
ear passeng er com
er com par
partment
tment Yo
u can charge a USB device, such as a mobile
phone, at the USB ports using a suitable charging
cable.
When theve hicle is switched on, the devices can
be charge d with 5 V (up to3 A). W W
ir
ireless c
eless c har
harging of t
ging of t he mobile phone and con-
he mobile phone and con-
nection wit
nection wit h t
h the e
he e xt
xter
er ior aer
ior aer ial
ial N
No
ot
tes on wir
es on wir elessl
elessly c
y c har
har ging t
ging t he mobile phone
he mobile phone &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cann otalw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. Seats and st
owing
141 141

#
Always st owobjects so that they cannot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
W WARNING ARNING Risk of /re from placing objects
in the mobile phone st owage compart-
ment
Placing other objects in the mobile phone
st ow age compartment could constitute a /re
hazard. #
Apart from a mobile phone, do not place
any other objects in the mobile phone
st ow age compartment, especially those
made of me tal. *
N NOOTE
TE Damage toobjects caused byplac-
ing them in the mobile phone st owage
compartment If objects are placed in
the mobile phone
st ow age compartment, these may be dam-
aged byelectromagnetic /elds. #
Do not place credit cards, storage
media, ski passes or other objects sensi-
tive toelectromagnetic /elds in the
mobile phone st owage compartment. *
N NOOTE
TE Damage tothe mobile phone st ow-
age compartment caused byliquids If liquids enter
the mobile phone st owage
compartment, the compartment may be dam-
aged. #
Ensure that no liquids enter the mobile
phone st owage compartment. R
Depending on theve hicle equipment, the
mobile phone is connected totheve hicle's
ex terior aerial via thech arging module. R
The charging function and wireless connection
of the mobile phone totheve hicle's exterior
aerial are only available if theve hicle is
switched on.
R Small mobile phones may not be able tobe
ch arge d in every position of the mobile phone
st ow age compartment.
R Largemobile phones which do not rest 0at in
th e mobile phone st owage compartment may
not be able tobe charge d or connected with
th eve hicle's exterior aerial.
R The mobile phone may heat up during the
ch arging process. This depends on the appli-
cations (apps) cur rently running.
The mobile phone can be cooled in the mobile
phone st owage compartment when the air
conditioning system is switched on. The cool-
ing output in the mobile phone st owage com-
partment is highest when the controller in the
glo vebox is closed.
R Toensure more e1cient charging and connec-
tion with theve hicle's exterior aerial, remo ve
th e pr otective co ver from the mobile phone. 142
142
Seats and st
owing

Pr
otective co vers which are designed for wire-
less charging are excluded.
R When charging, the mat should be used if pos-
sible. Char
Char
ging a mobile phone wir
ging a mobile phone wir elessly
elesslyR
R
eq
equir uir ements:
ements:
R The mobile phone is suitable for wireless
ch arging (Qi-compatible mobile phone).
A list of Qi-compatible mobile phones can be
fo und at: https://www.mercedes-benz-
mobile.com. #
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
When thech arging symbol is shown in the
multimedia system, the mobile phone is being
ch arge d.
Malfunctions during thech arging process are
shown in the central displa y.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater.
R
R adio eq adio eq uipment appr ov
uipment appr oval number
al number s f
s f or Br
or Br azil
azil
This device operates on a secondary basis, that is
to say it has no pr otection against harmful inter-
fe re nce, not even from the same type of stations,
and must not cause inter fere nce with systems
ope rating on a prima rybasis.
This product is permitted in accordance with the
procedure de/ned in Directive 242/2000 bythe
Brazilian telecommunications agency ANATEL and
meets the applicable tech nical requ irements.
Fu rther information is available on the ANATEL
we bsite. www.anatel.go v.br #
Further information on the declaration of con-
fo rm ity forve hicle components which receive
and/or transmit radio waves. F
F
itting and r
itting and r emo
emoving t
ving t he
he0oor
0oor mats
mats &
W
WARNING
ARNING Risk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cann otget into the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. Seats and st
owing
143 143

5
L Low beam/high beam
6 R Switches there ar fog light on/o.
When low beam is activated, theT indicator
lamp forth e standing lights will be deactivated
and replaced bytheL low- beam indicator
lamp. #
Always park your vehicle safely using su1cient
lighting, in accordance with there leva nt legal
stipulations.
* N
NOOTE
TE Battery dis charging byoperating the
standing lights Operating
the standing lights over a period of
hours puts a strain on the batter y. #
Where possible, switch on theright X
or leT Wparking light. Fo
rve hicles that are wider than 2 m or lon ger
th an 6 m,single-sided parking lighting is not per-
mitted in some countries. In this case, the stand-
ing lights are also switched on in the parking
lights position. If
th e battery is insu1cient lych arge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on sur round lighting
(/ page 153).
A
A ut ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto-
matically if there is fog, snow or other causes
of poor visibility such as spr ay. #
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc Switc hing t
hing t he r
he rear f
ear f og light
og light on/o.
on/o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in the L orà posi-
tion. #
Press button R.
Please obser vethe count ry-speci/c la wsonthe
use of rear fog lamps. 146
146
Light and sight

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is braked heavily from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LEDInt
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 148)
R Cornering light (/ page 148)
R Motorw ay mode (/ page 149)
R Enhanced fog light function (/ page 149)R
Bad weather light (/ page 149)
R City lighting (/ page 149)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. The cornering light can be activated
only when the low beam is switched on.
The function is active in thefo llowing cases:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned 148
148
Light and sight

Multimedia system:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A A
dap dap tiv
tive Highbeam Assis
e Highbeam Assist function t function&
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be activated despite
the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions. Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.150 150
Light and sight

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
151 151

#
Turn switch 1è tothe cor rect position
1 -4.
The è symbol will appear on the inst ru-
ment display when there ar wind owwiper is
switched on. R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o t he r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 155).
The wiper arms will mo veinto there placement
position.
R R emo
emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. 156
156
Light and sight

%
The duration until the colour changes varies
depending on the usage conditions. R
R
eplacing t
eplacing t he r
he rear windo
ear windo w wiper blade
w wiper blade &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. R R
emo emo ving t
ving t he wiper blade
he wiper blade #
Switch theve hicle o.. #
Fold wiper arm 2awa y from there ar wind ow
until it engages in there placement position. #
Unclip wiper blade 1from wiper arm 2and
re mo veit in the direction of ar row 3. F
F
itting t
itting t he wiper blade
he wiper blade #
Position wiper blade 1with bo thlugs 3on
holder 2onthe wiper arm. #
Push wiper blade 1inthe direction of ar row
4 until it engages in holder 2. #
Make sure that wiper blade 1is seated cor-
re ctl y. 158
158
Light and sight