heating MERCEDES-BENZ E-CLASS SALOON 2022 User Guide

R
R
eq
eq uir
uir ements:
ements:
R The fuel tank is /lled toat least there ser ve
le ve l. #
Set the desired temp erature using thew
button. #
Press button &.
The red or blue indicator lamp on the button
will light up or go out.
The colours of the indicator lamp ha vethefo llo w-
ing meanings:
R Blue:
Blue: stationary ventilation is switched on.
R R
R ed: ed: the stationary heater is switched on.
R Y
Yello w:
ello w:the departure time is preselected.
The stationary heater/ventilation will switch o.
automatically aTer 50 minutes.
Oper
Oper ation using t
ation using t he app:
he app:the stationary heater/
ve ntilation can also be ope rated via the Mercedes
me connect app. You can /nd fur ther information
in the separate Owner's Manual at https://
moba.i.daimler.com/mar kets/ece-r ow/baix/
ca rs/connectme/en_GB/#em otions/
St artsei te.html. Se
Se tting t
tting t he st
he stationar
ationar y heat
y heater/v
er/ventilation via t
entilation via t he
he
multimedia syst
multimedia syst em
em
Multimedia system:
4 Climate menu 5
Auxiliary heating #
Call up the air conditioning menu
(/ page 154). #
Select Auxiliary heating .
Selecting t
Selecting t he depar
he departur
ture time
e time #
Select the time TIME A: XX, TIME B: XXor
TIME C: XX.
Se
Se tting t
tting t he depar
he depar tur
ture time
e time #
Select the time TIME A: XX, TIME B: XXor
TIME C: XX. #
Select the pen beside the time. #
Set a time.
Se
Se tting t
tting t he st
he stationar
ationar y heat
y heater/v
er/ventilation via
entilation via
r
r emot
emot e contr
e contr ol
ol
R
R eq
eq uir
uir ements:
ements:
R The fuel tank is /lled toat least there ser ve
le ve l. Switc Switc
hing on immediat hing on immediat ely
ely #
Press and hold theu button.
Se
Se tting t
tting t he depar
he depar tur
ture time
e time #
Brie0y press theu button. #
Press the, or. button repeatedly
until the time tobe changed appears on the
displa y. 162
162
Climate control

#
Make sure that mar ked space 2is em pty. #
Remo vekey1 from theke yring. #
Place key1 in mar ked space 2.
The vehicle will start aTer a short time.
If yo ure mo vekey1 from mar ked space 2,
th eve hicle can still be driven. For fur ther
engine starts ho wever,key1 must be loca-
te d in mar ked space 2during the entire jour-
ne y. #
Have key1 checked at a quali/ed specialist
wo rkshop. If t
If t he v
he v ehicle does no
ehicle does no t st
t start:
art: #
Place key1 in mar ked space 2and lea veit
th ere. #
Depress the brake pedal and start theve hicle
using the start/s top button.
% You can switch on the po wer supply or the
ve hicle with the start/s top button.
Obser veany information rega rding display mes-
sages that can be displ ayed on the inst rument
displa y. S
S
t
tar
ar ting t
ting t he v
he vehicle via R
ehicle via R emot
emote Online Ser
e Online Ser vices
vices Cooling or heating t
Cooling or heating t
he v
he v ehicle int
ehicle int er
erior bef
ior bef ore
ore
st
st ar
ar ting t
ting t he jour
he jour ney
ney
Ensu rethefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
R The star ter battery is su1ciently charge d. Char
Char ging t
ging t he st
he start
arter batt
er batt er
ery bef
y bef or
ore st
e st ar
arting t
ting t he
he
jour
jour ney
ney
Yo u can receive a message on your smartphone
when the state of charge ofthe star ter battery is
lo w. You can then start theve hicle with the smart-
phone tocharge the batter y.The vehicle is auto-
matically switched o. aTer ten minutes.
Ensure thefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
St
St ar
arting t
ting t he v
he vehicle (R
ehicle (R emot
emote Online)
e Online) &
W WARNING ARNING Risk of crushing or ent rapment
due tounintentional starting of the engine
Limbs could be crushed or trapped if the
engine is star ted unintentionally during service
or maintenance work. 172
172
Driving and parking

&
D
DAN
AN GER
GER Risk of fatal injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi-
cle. This is the case, forex ample, if theve hicle
get s stuck in the sno w. #
Keep theta ilpipe and the area around
th eve hicle free from snow when the
engine or the stationary heater is run-
ning. #
Open a wind owonthe side of theve hicle
fa cing away from the wind toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of accident due tothe
brake system overheating
If yo u lea veyour foot on the brake pedal when
driving, the brake system may overheat.
This increases the braking distance and the
brake system can even fail. #
Never use the brake pedal as a foot re st. #
Do not depress the brake pedal and the
accelerator pedal at the same time while
driving. *
N
NOOTE
TE Engine damage due toexcessively
high engine speeds The engine will be damaged if
you drive with
th e engine in theove rrev ving range. #
Do not drive with the engine in theove r-
re vving range. *
N
NOOTE
TE Causing wearto the brake linings by
permanently depressing the brake pedal #
Do not permanently depress the brake
pedal while driving. #
Touse braking e.ect of the engine, shiT
to a lo werge ar in good time. *
N
NOOTE
TE Damage tothe driv etra in and
engine when pulling away #
Do not warm upthe engine while the
ve hicle is stationar y.Pull away immedi-
atel y. #
Avoid high engine speeds and driving at
full thro ttle until the engine has reached
its operating temp erature. *
N
NOOTE
TE Damage tothe catalytic con verter
due tonon-combusted fuel The engine is not
running smoo thly and is mis-
/ring.
Non-combus ted fuel may getinto the catalytic
con verter. #
Only depress the accelerator pedal
slightl y. #
Have the cause recti/ed immediately at
a qu ali/ed specialist workshop. 176 176
Driving and parking

*
N
N O
OTE
TE Damage caused bythe wrong fuel Ve
hicles with a diesel engine:
Even small amounts of the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using sulphur-free diesel fuel
th at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm. #
V
Vehicles wit
ehicles wit hout diesel par
hout diesel par ticulat
ticulate
e/lt
/lt er:
er:
Only refuel using diesel fuel wi tha sul-
phur content less than 500 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure bio-diesel or vege table oil
R Para1n or kerosene If
yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. *
N
NOOTE
TE Do not use diesel torefuel vehicles
with a petrol engine If
yo u ha veacciden tally refuelled wi th the
wrong fuel:
R Do not switch on theve hicle. Otherwise
fuel can enter the engine.
Even small amounts of the wrong fuel
could result in damage tothe fuel system
and the engine. The repair costs are high. #
Consult a quali/ed specialist workshop. #
Have the fuel tank and fuel lines drained
comple tely. *
N NO
OTE
TE Do not use petrol torefuel vehicles
with a diesel engine If
yo u ha veacciden tally refuelled wi th the
wrong fuel:
R Do not switch on theve hicle. Otherwise,
fuel can enter the fuel system.
Even small amounts of the wrong fuel
could result in damage tothe fuel system
and the engine. The repair costs are high. #
Consult a quali/ed specialist workshop. #
Have the fuel tank and fuel lines drained
comple tely. *
N NO
OTE
TE Damage tothe fuel system caused
by ove r/lled fuel tanks #
Only /ll the fuel tank until the pump noz-
zle switches o.. Driving and parking
195
195

S
S
t
tar
ar ting t
ting t he c
he char
harging pr
ging pr ocess
ocess &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage totheve hicle due toove r-
vo ltage in the mains supply The
vehicle is equipped with an elect rical fuse
which pr otects it against overvoltage in the
mains suppl y.This electrical fuse may trip dur- ing se
vere thunderstorms, forex ample, and
may cause the fuse in the building totrip or
may inter rupt thech arging process. These
functions pr otect theve hicle.
ATer the fuse in the building is switched on
again, thech arging process resumes automat-
icall y.
Fo llowing an inter ruption in the po wer supply
without the fuse in the building being tripped,
it may take up to te n minutes forch arging to
re sume automaticall y. *
N
NO
OTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are in0uenced by
th efo llowing factors:
R the po wer supply system and thech arging
cable are not damaged R
the inst ructions for handling thech arging
cable and the control element on the
ch arging cable ha vebeen obser ved #
Ifth ech arging cable or charging cable
connector becomes too hot, ha vethe
po we r supply system checked. *
N
NOOTE
TE Damaged or dirty vehicle soc ket
when the soc ket 0ap is open #
Alwayske ep the soc ket co ver and the
soc ket 0ap closed when there is no
ch arging cable connected. This pr otects
th eve hicle soc ket from dirt and damage. #
Make sure that the soc ket co ver is
closed proper lybefore closing the soc ket
0ap. This can otherwise result in damage
which may pr event the soc ket 0ap from
being opened again. 208
208
Driving and parking

Se
Se
tting A
tting A TTENTION ASSI ST
TTENTION ASSIST
Multimedia system:
4 © 5
Settings 5
Assistance
5 Attention Assist
Se
Se tting op
tting op tions
tions #
Select Standard ,Sensitive orOff .
Sugg
Sugg es
esting a rting a r es
est art ar ea
ea #
Select Suggest rest area .#
Activate or deactivate the function.
If AT TENTION ASSIST de tects fatigue or
increasing lack of attention, it suggests a rest
area in the vicinity. #
Select the suggested rest area.
Yo u are guided tothe selected rest area. Cr
Cr
uise contr
uise control and limit ol and limit er
er F
F
unction of cr
unction of cr uise contr
uise controlol
Cruise control regula testh e speed totheva lue
selected bythe driver.
If yo u accelerate toove rtake, fore xamp le,the
stored speed is not dele ted. If youre mo veyour fo
ot from the accelerator pedal aTer overtaking,
cruise cont rol will resume speed regulation back
to the stored speed.
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 217).
Mer Mer cedes‑
cedes‑ AMG v
AMG vehicles:
ehicles: cruise cont rol is availa-
ble up toa maximum speed of 250 km/h.
Displ ay
Display s in t
s in the Ins
he Instr trument Display
ument Display
R h (gre y): cruise control is selected but not
yet activated.
R h (gre en): cruise control is active.
A stored speed appears along with theh dis-
pla y.
% The segments extending from the cur rent
stored speed tothe end of the scale, or tothe
set winter tyre limit, light up in the speedome-
te r. Syst Syst
em limits em limits
Cruise control may be unable tomaintain the
stored speed on uphill gradients. The stored
speed is resumed when thegr adient evens out.
Change into a lo werge ar in good time on long and
steep downhill gradients. Take particular no teof
th is when driving a laden vehicle. By doing so, you
will make use of the engine's braking e.ect. This
re lie vesth e load on the brake system and pre-
ve nts the brakes from overheating and wearing
to oqu ickl y.
Do not use cruise control in thefo llowing situa-
tions:
R in tra1c situations which requ ire frequent
ch anges of speed, e.g. in heavy tra1c, on
winding roads
R on slippery roads. Accelerating can cause the
drive wheels tolose traction and theve hicle
could then skid.
R when visibility is poor
F
F unction of t
unction of t he limit
he limiter
er
The limiter restricts the speed of theve hicle. To
re duce the speed tothe set speed, the limiter
applies the brakes automaticall y.226
226
Driving and parking

#
Ensure there is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation and heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R For car washes with a con veyor system: -
Neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V Vehicles wit
ehicles with decor h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil.
Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's opera-
to r manual.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical component parts, bat-
te ries, illuminants and louvres. Maintenance and care
349 349

T
T
r
railer hitch
ailer hitch
R Obser vethe no tes on care in the trailer hitch
manufacturer's operator manual.
R Do not clean the ball neck with a high-pres-
sure cleaner or sol vent.
R Remo vetraces of rust on the ball (e.g.using a
wire brush).
R Remo vedirt with a lint-free clo th.
R ATer cleaning, lightly oil or grease the ball
head.
% Before using trailers with anti-torsional cou-
pling, obser vethe manufacturer's operator
manual. N No
ot
tes on car
es on car e of t
e of the int
he int er
erior
ior &
W WARNING
ARNING Risk of injury from plastic parts
breaking o. aTer the use of sol vent-based
ca re products
Care and cleaning products containing sol-
ve nts can cause sur faces in the cockpit to
become porous. When the airbags are
deplo yed, plastic parts may break away. #
Do not use any care or cleaning products
containing sol vents toclean the cockpit. &
W WARNING
ARNING Risk of injury or fatal injuries
from bleached seat belts
Bleaching or dyeing seat belts can se verely
we aken them.
This can, forex ample, cause seat belts to tear
or fail in an accident. #
Never bleach or dye seat belts. To
avo id damage totheve hicle, obser vethefo l-
lowing no tes on cleaning and care:
Seat belts Seat belts R Clean with luk ewarmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display
Display
R Switch o. the display and let it cool down. R
Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycare product (TFT-
LC D).
R Do not use any other agents.
Head-up displ ay
Head-up display
R Clean with a soT, non-static, lint-free clo th.
R Do not use cleaning agents.
Plas Plastic tr tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaning agent recom-
mended for Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als.
R Do not allow cosmetics, insect repellent or
sun cream tocome in contact with the plastic
trim.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Blackpiano-lacquer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaning agent recom-
mended for Mercedes-Benz. Maintenance and care
353
353

At
a dis tance of app roximately 1 m tothe tyre
in0ation compressor and appr oximately 1.6 m
abo vethegr ound, thefo llowing sound pres-
sure le vels appl y:
R Emissions sound pressure le vel
L PA 83 dB (A)
R Sound po wer le vel L
WA 91 dB (A)
The tyre in0ation compressor is maintenance-
free. If there is a malfunction, please contact
a qu ali/ed specialist workshop. Using t
Using t
he TIREFIT kit
he TIREFIT kit R
R
eq
eq uir
uir ements:
ements:
R Tyre sealant bottle and tyre in0ation compres-
sor (/ page 359)
R TIREFIT stic ker
R Gloves
Yo u can use TIREFIT tyre sealant toseal per fora-
tion damage of up to4 mm, particular lythose in
th e tyre contact sur face. You can use TIREFIT in
outside temp eratures down to-20 °C. &
W
WARNING
ARNING Risk of accident when using
tyre sealant
The tyre sealant may be unable toseal the
tyre proper ly, especially in thefo llowing cases:
R there are lar gecuts or punctures in the
tyre (la rger than damage pr eviously men-
tioned)
R the wheel rims ha vebeen damaged
R aTer journe yswith very low tyre pressure
or with 0at tyres #
Do not continue driving. #
Consult a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of injury and poisoning
from tyre sealant
Ty re sealant is hazardous tohealth and causes
ir rita tion. Do not allow it tocome into contact
with your skin, eyes or clo thing, and do not
swallow it. Do not inhale any vapours. Keep
th e tyre sealant away from children. Obser
vethefo llowing if you come into contact
with the tyre sealant: #
Rinse o. the tyre sealant from your skin
using water immediatel y. #
If tyre sealant gets into your eyes, thor-
oughly rinse them using clean water
immediatel y. #
If tyre sealant has been swallo wed,thor-
oughly rinse out your mouth immediately
and drink plenty of water. Do not induce
vo miting and seek medical attention
immediatel y. #
Change out of clo thing which has come
into contact with tyre sealant immedi-
atel y. #
If an alle rgic reaction occurs, seek medi-
cal attention immediatel y. *
N NO
OTE
TE Overheating due tothe tyre in0ation
compressor running too long #
Do not runth e tyre in0ation compressor
fo r longer than ten minutes without inter-
ru ption. 360 360
Breakdown assistance

Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a die-
h a die-
sel engine
sel engine
Gener Gener al not
al notes
es
Obser vethe no tes on operating 0uids
(/ page 399). &
W
WARNING
ARNING Risk of /re from fuel mixtu re
If yo u mix diesel fuel with petrol, the 0ash
point of the fuel mixture is lo werth an that of
pure diesel fuel. #
Neverre fuel using petrol in diesel
engines. #
Never mix petrol with diesel fuel. *
N
NOOTE
TE Damage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system.
V
V ehicles wit
ehicles wit h a diesel par
h a diesel par ticulat
ticulat e
e/lt
/lt er:
er: #
Only refuel using sulphur-free diesel fuel
th at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm.
V
V ehicle wit
ehicle wit hout diesel par
hout diesel par ticulat
ticulate
e/lt
/lt er:
er: #
Only refuel using diesel fuel wi tha sul-
phur content less than 500 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure fatty acid me thyl ester or veget able
oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For diesel fuel with a maximum of 7% fatty
acid me thyl ester byvolume (bio-diesel)
2 For diesel fuel with a maximum of 10% fatty
acid me thyl ester byvolume (bio-diesel)
Ac cording toEuropean standard EN 16942 you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 193) 402 402
Te
ch nical data