ESP MERCEDES-BENZ E-CLASS SALOON 2022 Manual PDF

P
P
ar
ar king ser
king ser vice
vice
* NO
NOTE
TEDamage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. #
Obser vethe signposted headroom clear-
ance. #
Ifth eve hicle height is greater than the
permitted headroom clearance, do not
enter. #
Obser vethech anged vehicle height with
add-on roof equipment. *
N
NOOTE
TE Vehicle damage due tofailure to
obser velocal information and parking
conditions The data is based on
the information pr ovided
by there specti veservice pr oviders. Mercedes-Benz does not guarantee
the accu-
ra cy of the information pr ovided in relation to
th e car park or parking area. #
Always obser vethe local information and
conditions. %
This service is not available in all countries. #
Select Zand activate Parking. #
Tap on jinthe map. #
Select a parking option.
The map sho ws the parking options in the
vicinity.
The following information is displa yed (if avail-
able):
R Destination address, dis tance from cur rent
ve hicle position and ar riva l time
R Information on the multi-s tore y car
park/car par k,forex ample:
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time -
Maximum access height Maximum access height
The maximum access height sh ownby
th e parking service does not replace
th e need for obser vation of the actual
circumstances.
R Available payment options (Mercedes pa y,
coins, bank no tes, cards)
R Details on parking tari.s
R Number of available parking spaces
R Payment me thod (e.g. at the parking
me ter)
R Services/facilities at the parking option
R Telephone number #
Calculate thero ute (/ page 311). N
No
ot
tes on t
es on t he dashcam
he dashcam *
N
NOOTE
TE Obser velegal regulations and data
pr otection provisions Yo
u are legally responsible for operation and
use of the dashcam functions. 314
314
MBUX multimedia system

This will contact
youto con/rm the appoint-
ment and if necessary consult about the
de tails.
% Ifyo u select LateraTerthe service message
appears, the message is hidden and reap-
pears at a later time.
Giving consent t
Giving consent t o dat
o data tr
a transf
ansf er dur
er dur ing a Mer
ing a Mer cedes
cedes
me call
me call
R R eq
eq uir
uir ements:
ements:
R There is an active Mercedes me call via the
multimedia system or the me button in the
ove rhead control panel (/ page 319).
% The prom pttocon/rm data transfer does not
appear in all count ries.
If th eAc cident/B reakdown Management and
Main tenance Mana gement services are not acti-
va ted on Mercedes me, theDo you want to trans-
mit vehicle data and the vehicle's position to
the Mercedes-Benz Customer Centre in order to
improve the processing of your request? mes-
sage is shown. #
Select Yes.
Re leva nt identi/cation data is transmitted
automaticall y.
More information on Mercedes me: https://
ww w.mercedes.me
T T r
ransf
ansf err
erred dat
ed dat a dur
a during a Mer
ing a Mer cedes me call
cedes me call
When you make a service call via Mercedes me,
data is transmitted. This enables targ eted advice
and a smoo thservice.
The following requ irements must be ful/lled for
th e transfer of the data:
R The vehicle is switched on.
R The required da tatransfer tech nology is sup-
por tedby the mobile phone network pr ovider.
R The quality of the mobile connection is su1-
cient.
Multi-s tage transfer depends on thefo llowing fac-
to rs:
R Reason forth e initiation of the call
R The available mobile phone transmission tech-
nology.
R The activated Mercedes me connect services. R
The service selected in thevo ice control sys-
te m.
% A prom ptfor consent tothe data transfer only
occurs if the cor responding Mercedes me
connect service is not activated.
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e no
e no t activ
t activ at
ated
ed
If no Mercedes me connect services are activated
and the data pr otection prom pthas been con-
/rmed thefo llowing data is transmitted:
R Vehicle identi/cation number
R Time of the call
R Reason forth e initiation of the call
R Con/ rmation of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle 322 322
MBUX multimedia system

Apps
for Smartphone Integ ration
R Apple CarPlay ®
R Android Auto
% For saf etyre asons, the /rst activation of
Smartphone Integ ration on the multimedia
system must be car ried out when theve hicle
is stationary and the parking brake is applied.
Yo u can start Apple CarPlay ®
or Android Auto
from the device manager.
% Mercedes-Benz recommends disconnecting
th e connecting cable only when theve hicle is
stationar y.
Ov
Ov er
ervie
vie w of tr
w of tr ansf
ansferr
erred v
ed v ehicle data
ehicle data
When using Smartphone Integ ration, cer tain vehi-
cle data is transfer redto the mobile phone. This
enables youto get the best out of selected mobile
phone services. Vehicle data is not directly acces-
sible.
The following system information is transmitted:
R SoTware release of the multimedia system
R System ID (anonymised) The transfer of
this data is used tooptimise com-
munication between theve hicle and the mobile
phone.
To do this, and toassign se veralve hicles tothe
mobile phone, a vehicle identi/er is random lyge n-
erated.
This has no connection totheve hicle identi/ca-
tion number (VIN) and is dele ted when the multi-
media system is reset (/ page 306).
The following driving status data is transmitted:
R Transmission position engaged
R Distinction between par ked, standstill, rolling
and driving
R Day/night mode of the inst rument display
R Drive type
The transfer of this data is used toalter how con-
te nt is displa yedto cor respond tothe driving sit-
uation.
The following position data is transmitted:
R Coordinates
R Speed
R Compass direction R
Acceleration direction
This data is used bythe mobile phone toimpr ove
th e accuracy of the navigation (e.g. for continua-
tion in a tunnel). Mer Mer
cedes-Benz emerg
cedes-Benz emerg ency call syst
ency call system
em Inf
Inf
or
ormation on t
mation on t he Mer
he Mercedes-Benz emerg
cedes-Benz emerg ency
ency
call syst
call syst em
em The Mercedes-Benz emer
gency call system only
functions in areas where mobile phone co verage
is available from there leva nt cont ract partne r.
Insu1cient network co verage from there leva nt
cont ract partner may result in an emer gency call
not being transmitted.
The vehicle must be switched on before an auto-
matic emer gency call can be made.
% The Mercedes-Benz eme rgency call system is
activated at thefa ctor y.Using the Mercedes-
Benz emer gency call system is free of charge. 328
328
MBUX multimedia system

Ov
Ov
er
ervie
vie w of t
w of t he Mer
he Mer cedes-Benz emerg
cedes-Benz emerg ency call
ency call
syst
syst em
em The Mercedes-Benz emer
gency call system can
help todecisively reduce the time between an
accident and the ar riva l of emer gency services at
th e site of the accident. It helps locate an acci-
dent site in places that are di1cult toaccess.
The emer gency call can be made automatically
(/ page 329) or manual ly (/ page 330). Only
make emer gency calls if you or others are in need
of rescue. Do not make an emer gency call in the
ev ent of a breakdown or a similar situation.
Yo u can /nd more information on there gional
av ailability of eCall at: https://www.mercedes-
benz-mobile.com/extra/ecall/
Messag
Messag es on t es on the displ ay
he displ ay
The following message s appear inthe displa y:
R SOS NOT READY :th eve hicle is not switched
on or the emer gency call system is malfunc-
tioning . This does not necessarily indicate
comple tefailure of the emer gency call system.
Eme rgency calls can still be transmitted. The display only
refers to theve hicle and does
not take account of theav ailability of mobile
phone networ ksand the Mercedes-Benz emer-
ge ncy call centre.
The functional readiness of the emer gency call
system on theve hicle can be seen when the
SOS NOT READY displaydisappears once the
ve hicle is switched on.
R G: The icon appears in the display during
an active emer gency call.
% Ifth ere is a malfunction in the Mercedes-Benz
emer gency call system (e.g. a fault with the
speaker, microphone, airbag, SOS button), a
cor responding message appears on the dis-
play in the inst rument cluster. T
T
r
rigg
igg er
ering an aut
ing an aut omatic Mer
omatic Mer cedes‑Benz emer-
cedes‑Benz emer-
g
g ency call
ency call R
R
eq
eq uir
uir ements:
ements:
R The vehicle is switched on.
R The star ter battery is su1ciently charge d. The Mercedes‑Benz emer
gency call system trig-
ge rs an emer gency call automatically in thefo l-
lowing cases:
R ATer activation of there straint systems su ch
as airbags or seat belt tensioners aTer an
accident
The eme rgency call has been made:
R Avo ice connection is made tothe
Mercedes‑Benz eme rgency call centre.
R A message with accident data is transmitted
tothe Mercedes‑Benz emer gency call centre.
The Mercedes‑Benz eme rgency call centre
can transmit theve hicle position data toone
of the public emer gency services call centres.
R Under cer tain circumstances data is also
transmitted in thevo ice channel tothe
Mercedes‑Benz eme rgency call centre.
This allo wsmeasures forre scue, reco very or
to wing toa Mercedes‑Benz Se rvice Centre to
be initiated quickl y.
The SOS button in theov erhead control panel
0ashes until the emer gency call is /nished. MBUX multimedia system
329 329

It is not possible
toimmediately end an automatic
emer gency call.
If th e Mercedes‑Benz emer gency call system can-
not connect tothe Mercedes‑Benz emer gency
call centre, the emer gency call is automatically
sent tothe public emer gency services call centre.
If no connection can be made tothe public emer-
ge ncy services, a cor responding message
appears in the displa y. #
Dial the emer gency number 999 or 112 112on
yo ur mobile phone.
If an emer gency call has been initia ted:
R Remain in theve hicle if thero ad and tra1c
conditions permit youto do so until a voice
connection is established with the emer gency
call centre ope rator.
R Based on the call, the operator decides
whe ther it is necessary tocall rescue teams
and/or the police tothe accident site.
R If no vehicle occupant answers, an ambulance
is sent totheve hicle immediatel y. T
T
r
rigg
igg er
ering a manual Mer
ing a manual Mer cedes-Benz emerg
cedes-Benz emerg ency
ency
call
call #
T
T o use t
o use t he SOS butt
he SOS butt on in t
on in theov
he overerhead con-
head con-
tr
tr ol panel:
ol panel: pressthe SOS button at least one
second long (/ page 319). #
T
T o use v
o use v oice contr
oice contr ol:
ol:use the LINGU ATRO NIC
vo ice commands.
The emer gency call has been made:
R Avo ice connection is made tothe Mercedes-
Benz emer gency call centre.
R A messa gewith accident data is transmit ted
to the Mercedes-Benz emer gency call centre.
The Mercedes-Benz eme rgency call centre
can transmit theve hicle position data toone
of the public emer gency services call centres.
R Under cer tain circumstances data is also
transmitted in thevo ice channel tothe
Mercedes-Benz eme rgency call centre.
This allo wsmeasures forre scue, reco very or
to wing toa Mercedes-Benz Se rvice Centre to
be initiated quickl y.
R Remain in theve hicle if thero ad and tra1c
conditions permit youto do so until a voice connection is established with
the emer gency
call centre ope rator.
R Based on the call, the operator decides
whe ther it is necessary tocall rescue teams
and/or the police tothe accident site.
If th e Mercedes-Benz emer gency call system can-
not connect tothe Mercedes-Benz emer gency
call centre, the emer gency call is automatically
sent tothe public emer gency services call centre.
If no connection can be made tothe public emer-
ge ncy services, a cor responding message
appears in the media displa y. #
Dial the emer gency number 999 or 112 112on
yo ur mobile phone.
Ending an unint
Ending an unint entionall
entionally tr
y trigg
igger
ered manual
ed manual
Mer
Mer cedes-Benz emerg
cedes-Benz emerg ency call
ency call #
Using t
Using t he multifunction st
he multifunction st eer
eering wheel:
ing wheel: select
~. 330
330
MBUX multimedia system

30 minutes with a normal driving style and
even
longer with an active driving style.
On-board computer:
4 Service 5
Engine oil level
One of thefo llowing message s will appear onthe
inst rument displa y:
R Engine oil level Measuring now: measu rement
of the oil le vel is not yet possible. #
Repeat there qu est aTer a maximum of
30 minutes' driving.
R Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
leve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T T op up engine oil
op up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of /re and injury from
engine oil
If engine oil comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Make sure that no engine oil is spilled
next tothe /ller opening. #
Allow the engine tocool o. and thor-
oughly clean the engine oil from compo-
nent parts before starting theve hicle. *
N
NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters which
do not cor respond tothe speci/cations
ex plicitly prescribed forth e service inter-
va ls. #
Follow the inst ructions on the service
inter val display forch anging the engine
oil and obser vethe prescribed change
inter vals. #
Do not use additives. Maintenance and care
345 345

W
W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand *
N
NOOTE
TE Engine damage due towa ter ing ress #
Take care not topoint thewa ter jet
directly towa rdsth e air inlet grille below
th e bonnet. Obser
vethere leva nt legal requ irements (e.g. in
some countries, washing byhand is permitted
only in special lydesignated wash ba ys). #
Use a mild cleaning agent (e.g. car shampoo). #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 351). N
No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes: P
P aint
aint
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver.
R Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible.
Matt
Matt /nish
/nish
R Only use care products appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop. R
Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards.
R Do not use car wash prog rammes with a /nal
hot wax treatment.
R Do not use paint cleaners, bu1ng or polishing
products, gloss preser vers,e. g. wa x.
In theev ent of paintwork damage:
R Always ha vepaintwork repairs car ried out at a
qu ali/ed specialist workshop.
R Make sure thera dar sensors function
(/ page 218). N No
ot
tes on cleaning decor
es on cleaning decor ativ
ative f
e foils
oils Obser
vethe no tes on matt /nish care in thech ap-
te r "No tes on paintwork/matt /nish paintwork
care" (/ page 350). They also apply tomatt dec-
orative foils.
Obser vethe no tes on cleaning decorative foils to
av oid damage. 350
350
Maintenance and care

Cleaning
Cleaning
R For cleaning, use plenty of water and a mild
cleaning agent without additives or abrasive
substances (e.g. a car shampoo appr ovedfor
Mercedes-Benz).
R Remo vedirt as soon as possible. Avoid rub-
bing too hard in order tonot ir reparably dam-
age the decorative foil.
R Ifth ere is dirt on the /nish or if the decorative
fo il is dull: Use thePa int Cleaner recommen-
ded and appr ovedfo r Mercedes-Benz.
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Topreve ntwa ter stains, dry a foil-wrapped
ve hicle with a soT, absorbent clo thaTer every
car wash.
Av
Av oiding damag
oiding damag e t
e to t
o t he decor
he decor ativ
ative f
e foil
oil
R The service life and colouring of decorative
foils are impaired by:
- Sunlight
- Temp erature (e.g. hot air blo wer) -
Weather conditions
- Stone chippings and dirt
- Chemical cleaning agents
- Oily products
R Do not use polish on matt decorative foil. Po l-
ishing will ha vethe e.ect of shining thefo il-
wrapped sur face.
R Do not treat matt or st ructured decorative
fo ils with wax.Pe rm anent stains may occur.
Scratches, cor rosive deposits, areas a.ected by
cor rosion and damage caused byincor rect care
cannot alw ays be comple tely rep aired. In this
case, contact a quali/ed specialist workshop.
Yo u can obtain more information on care and
cleaning agents from the manufacturer.
In the case of foil-wrapped sur faces, optical di.er-
ences may occur between the sur faces that we re
not pr otected bya decorative foil aTer removing a
decorative foil.
% Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop
(e.g. in a Mercedes-Benz Se rvice Centre). N No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and theve hicle before cleaning the wind-
screen or wiper blades. &
W
WARNING
ARNING Risk of burns from theta ilpipe
and tailpipe trims
The exhaust tailpipe and tailpipe trims can
become very hot. If you come into contact
with these parts of theve hicle, you could burn
yo urself. #
Always be particular lycareful around the
ta ilpipe and theta ilpipe trims and super-
vise children especially closely in this
area. Maintenance and care
351
351

#
Allow vehicle parts tocool down before
to uching them. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing car parts:
Wheels and r
Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes
aTer cleaning before parking it. The brake
disks and brakepads warm up and dry out.
W
W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz.
R Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% ATer changing the wiper blades or treating
th eve hicle with wax, clean the windscreen th
oroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure toobser vethe
application instructions may result in damage,
smear mar ksor dazzling spots.
% Remo veextern al fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving saf ety
systems may be impaired or not available
(/ page 218).
W
W iper blades
iper blades
R Movethe wiper arms into there placement
position (/ page 147).
R With th e wiper arms folded out, clean the
wiper blades with a damp clo th.
% Make sure that the wiper blades are coated.
The coating can lea veresidues on a clo th. Do
not rubth e wiper blades excessively or clean
th em too oTen.
Ext
Ext er
erior lighting
ior lighting
R Clean the lenses with a wet sponge and mild
cleaning agent (e.g. car sha mpoo).
R Only use cleaning agents or cleaning clo ths
th at are suitable for plastic lenses. V
V
ehicle soc ke
ehicle soc ket (high-v
t (high-v olt
oltag
age batt
e batt er
ery)
y)
R Use clean water and a soT clo thtoclean the
ve hicle soc ket.
R Do not use high-pressure cleaners or cleaning
agents such as soap.
Sensors
Sensors
R Clean the sensors in the front and rear bump-
ers with a soT clo thand car shampoo
(/ page 218).
R When using a high-pressure cleaner, main tain
a minimum distance of 30 cm.
Rev
Rev er ersing camer
sing camer a and 360° Camera
a and 360° Camera
R Toopen there ar camera co ver,switch on the
ve hicle.
R Use clean water and a soT clo thtoclean the
camera lens.
R Do not use a high-pressure cleane r.
T
T ailpipes
ailpipes
R Clean with a cleaning agent recommended for
Mercedes-Benz, especially in the winter and
aTer washing theve hicle.
R Do not use acidic cleaning agents. 352
352
Main
tenance and ca re

R
vehicle vib ration
R smo kewhich smells like rubber
R continuous ESP ®
inter vention
R crac ksinthe tyre side walls #
ATer driving in emer gency mode, ha ve
th erims checkedby a quali/ed specialist
wo rkshop with rega rd totheir fur ther
use. #
The defective tyre must be replaced in
ev ery case. Wi
th MOEx tended tyres (run-0at tyres), you can
continue todrive your vehicle even if there is a
to ta l loss of pressure in one or more tyres. Ho w-
ev er, the tyre a.ected must not show any clear ly
visible damage.
Yo u can recognise MOExtended tyres bythe
MOEx tended ma rking which appears on the side
wa ll of the tyre.
V
V ehicles wit ehicles wit h tyr
h tyr e pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em:
em:
MOExtended tyres may only be used in conjunc-
tion with an activated tyre pressure loss warning
system. V
V ehicles wit
ehicles wit h tyr
h tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy st
stem:
em:
MOExtended tyres may only be used in conjunc-
tion with an activated tyre pressure monitoring
system.
If a pressure loss warning message appears inthe
driver's displa y,proceed as follo ws:
R Check the tyre for damage.
R If driving on, obser vethefo llowing no tes.
Dr
Dr iving dist iving dist ance possible in emerg
ance possible in emerg ency mode
ency mode
aTer
aTer t
the pr
he pr essur
essur e loss w
e loss w ar
arning:
ning: Load condition
Load condition
Dr
Driving dist
iving dist ance possi-
ance possi-
ble in emerg
ble in emerg ency mode
ency mode
Pa rtially laden 80 km
Fu lly laden 30 km The driving distance possible in emer
gency mode
may vary depending on the driving style. Obser ve
th e maximum permissible speed of 80 km/h.
If a tyre has gone 0at and cannot be replaced with
an MOExtended tyre, you can use a standard tyre
as a temp orary measure. TIREFIT kit st
TIREFIT kit st
or
orag
ag e location
e location The TIREFIT kit is located under
the boot 0oor. 1
Tyre sealant bottle
2 Tyre in0ation compressor
Depending on the model, the TIREFIT kit may also
be located in other places under the boot 0oor.
% You can /nd information on the po wer cate-
gory (LK) and/or electrical data on the back
of the tyre in0ation compressor:
R LK2 – 12 V/15 A,180 W,0.8 kg Breakdown assistance
359
359