wiper blades MERCEDES-BENZ E WAGON 2005 S211 Owner's Manual

Contents
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 330
Tire ply material ........................... 332
Tire and loading terminology ........ 332
Rotating tires ............................... 335
Winter driving .................................... 337
Winter tires .................................. 337
Block heater* (Canada only) ........ 338
Snow chains................................. 338
Maintenance...................................... 339
Clearing the maintenance
service indicator........................... 340
Maintenance service term
exceeded ..................................... 340
Calling up the maintenance
service indicator........................... 341
Resetting the maintenance
service indicator........................... 341
Setting the date for special
works ........................................... 342
Calling up the maintenance
service data information .............. 343
Vehicle care ....................................... 344
Cleaning and care of vehicle ........ 344
Practical hints.................................. 351
What to do if … ................................... 352
Lamps in instrument cluster ......... 352
Lamp in center console................. 360
Vehicle status messages in the
multifunction display..................... 362
Where will I find ...? ............................ 401
First aid kit.................................... 401
Vehicle tool kit, jack and
spare wheel .................................. 401
Unlocking / locking in an emergency .. 404
Unlocking the vehicle.................... 404
Locking the vehicle ....................... 405
Fuel filler flap emergency release . 405
Manually unlocking the
gear selector lever ........................ 405
Opening / closing in an emergency ..... 407
Tilt / sliding sunroof*..................... 407
Replacing SmartKey batteries ............ 408
SmartKey ...................................... 408
SmartKey with KEYLESS-GO* ....... 409
Replacing bulbs .................................. 410
Bulbs ............................................. 410
Replacing bulbs for front lamps .... 413
Replacing bulbs for rear lamps ..... 415Replacing wiper blades ...................... 416
Removing wiper blades ................. 416
Installing wiper blades .................. 417
Flat tire............................................... 418
Preparing the vehicle .................... 418
Mounting the spare wheel ............ 419
Batteries............................................. 424
Disconnecting the battery ............ 426
Removing the battery ................... 426
Charging and reinstalling the
battery .......................................... 427
Reconnecting the battery ............. 427
Jump starting...................................... 428
Towing the vehicle.............................. 430
Installing towing eye bolt .............. 433
Fuses.................................................. 434
Aids for replacing fuses ................ 434
Fuse box in passenger
compartment ................................ 435
Fuse box in cargo compartment ... 435

53 Getting started
Driving
Intermittent wiping
Turn the combination switch to
positionI.
Single wipe

Press switch briefly in the direction of
arrow1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid

Push switch in the direction of
arrow1 past the resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system*”
(
page 306).
!Do not leave windshield wipers in inter-
mittent setting when the vehicle is tak-
en to an automatic car wash or during
windshield cleaning. Wipers will oper-
ate in the presence of water sprayed on
the windshield, and wipers may be
damaged as a result.
The combination switch should not be
left in intermittent setting as the wipers
will wipe the windshield once every
time the engine is started. Dust that ac-
cumulates on the windshield might
scratch the glass and / or damage the
wiper blades when wiping occurs on a
dry windshield.
iIntermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened.
!If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.

For safety reasons,

turn off the engine by turning
the SmartKey to position0 and
withdraw SmartKey from starter
switch
or


turn off the engine by pressing
the KEYLESS-GO* start/stop
button and open the driver’s
door (with the driver’s door
open, starter switch is in
position0, same as with
SmartKey removed from starter
switch)
before attempting to remove any
blockage.

299 Operation
Engine compartment
Engine compartment
Hood
Opening
1Hood release

Pull lever1 downwards.
The hood is unlocked and handle2
will extend out of the radiator grille.
2Handle for opening the hood

Pull handle2 to its stop out of radia-
tor grille.

Pull up on the hood (do not pull up on
the handle) and then release it.
The hood will be automatically held
open at shoulder height by gas-filled
struts.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
!To avoid damage to the windshield wip-
ers or hood, never open the hood if the
wiper arms are folded forward away
from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running. Make sure the hood is
properly closed before driving. When closing
the hood, use extreme caution not to catch
hands or fingers.
The radiator fan may continue to run for ap-
proximately 30 seconds or even restart af-
ter the engine has been turned off. Stay
clear of fan blades.

347 Operation
Vehicle care
Ornamental moldings
For regular cleaning and care of very dirty
chrome-plated parts, use a chrome clean-
er.
Headlamps, tail lamps, side markers,
turn signal lenses
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo,
with plenty of water.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the lenses. Do not at-
tempt to wipe dirty lenses with a dry cloth
or sponge.Cleaning the Distronic* system sensor
cover
1Distronic system sensor cover
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo,
with plenty of water to clean sensor
cover1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.Wiper blades

Turn on the wipers and place it in a ver-
tical position.
For information on placing the wipers in a
vertical position, see “Replacing wiper
blades” (
page 416).
iRestart the engine after cleaning sen-
sor cover1.!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.


348 OperationVehicle care
Clean the wiper blade inserts with a
clean cloth and detergent solution.Window cleaning

Turn on the wipers and place it in a ver-
tical position.
For information on placing the wipers in a
vertical position, see “Replacing wiper
blades” (
page 416).Use a window cleaning solution on all glass
surfaces. An automotive glass cleaner is
recommended.
Light alloy wheels
Mercedes-Benz approved Wheel Care
should be used for regular cleaning of the
light alloy wheels.
If possible, clean wheels once a week with
Mercedes-Benz approved Wheel Care, us-
ing a soft bristle brush and a strong spray
of water.
Follow the instructions on the container.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before cleaning the wiper blades.
Otherwise, the wiper motor could suddenly
turn on and cause injury. !Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before cleaning the windshield.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.


351 Practical hints
What to do if …
Where will I find ...?
Unlocking / locking in an emergency
Opening / closing in an emergency
Replacing bulbs
Replacing wiper blades
Flat tire
Batteries
Jump starting
Towing the vehicle
Fuses

416 Practical hintsReplacing wiper blades
Removing wiper blades
Turn SmartKey in starter switch to
position1.

Turn combination switch to wiper
settingII (
page 52).

With wiper arm in the vertical position,
turn SmartKey in starter switch to
position0.

Fold the wiper arm forward until it
snaps into place.

Turn the wiper blade at a right angle to
wiper arm.

Slide the wiper blade sideways out of
the retainer.
!To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle's on-board electronics have status
0) before replacing a wiper blade. Other-
wise, the wiper motor could suddenly turn
on and cause injury.

417 Practical hints
Replacing wiper blades
Installing wiper blades
Slide the wiper blade onto wiper arm
until it locks in place.

Rotate the wiper blade into position
parallel to wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!Never open the hood when the wiper
arm is folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

474 IndexI
Identification labels 440
Ignition 34, 36
Switching on 47, 48, 54
Immobilizer 97
Activating 97
Deactivating 97
Indicator lamps see Lamps, indicator and
warning
Infant and child restraint systems 73
Installing 82
LATCH child seat anchors 83
Information
About service and warranty 10
Button for Tele Aid* 274
Inserting the cargo tie-down ring in the
mounting element 253
Inserting the mounting elements into the
cargo rails 252
Inside rear view mirror
Antiglare 191
Installing
Infant and child restraint systems 82
Towing eye bolt 433
Wiper blades 417
Installing the storage box 256Instrument cluster 24, 150, 349, 461
Coolant
Temperature indicator 151
Illumination 150
Multifunction display 153
Outside temperature indicator 152
Selecting language 166
Integrated remote control
Canadian programming 281
Erasing memory 282
Gate operator 281
Hand-held transmitter 279
Operation 282
Rolling code programming 280
Interior lighting 147
Activating automatic control 147
Deactivating automatic control 147
Delayed switch-off 173
Manual operation 148
Interior lighting in the rear 149
Interior rear view mirror
Adjusting 42
Interior storage spaces
Glove box 259J
Jack 402
Jump starting 428
K
Key, Mechanical 404
Key, SmartKey
Changing the batteries 408, 409
Key, SmartKey with KEYLESS-GO*
Changing the batteries 408, 409
KEYLESS-GO* 461
Activating ignition with 36
Closing
Tailgate 119, 121
Factory setting 110
Global locking 110
Global unlocking 110
Important notes 108
Locking the vehicle 113
Opening the tailgate 112
Remote control 107
Starting the engine 48, 54
Turning off engine 59
Unlocking the tailgate 112
Unlocking with 33
Kickdown 189, 461
Kilometers/miles in speedometer 165

480 IndexRecovery services
For stolen vehicle 277
Regular checks 297
Reinstalling the battery 427
Remote control
SmartKey with KEYLESS-GO* 107
Remote controls
Integrated 279
SmartKey 102, 107
Remote door unlock
With Tele Aid* 276
Removing
Vehicle battery 426
Wheel 421
Wiper blades 417
Removing and installing
Front seat head restraints 126
Removing and installing seat
cushions 136
Removing the storage box 256
Removing the twin roller blind 258
Replacing
Bulbs 410
Front lamp bulbs 413
Fuses 434
License plate lamp bulbs 415Rear lamp bulbs 411, 415
Side marker lamp bulb 415
Wiper blades 416
Reporting
Safety defects 18
Reprogramming
integrated remote control 282
Reset button in the instrument
cluster 162
Resetting
All functions (control system) 162
All functions of a submenu 163
Fuel consumption 178
Maintenance service indicator 341
Service indicator (FSS) 342
Trip odometer 151
Residual heat utilization 207, 219
Residual ventilation 219
REST (Residual engine heat
utilization) 219
Restraint system see Infant and child re-
straint systems 73
Rim 334
Rims and Tires 443
Roadside Assistance
Tele Aid* 269Roadside assistance 12
Rolling code programming 280
Rolling up the cargo compartment
cover 257
RON 297
RON (Research Octane Number) 463
Rubber parts
Cleaning 350
S
Safety
Occupant 62
Safety belts see Seat belts 44
Safety defects
Reporting 18
Safety systems
Driving 87
Saving current speed 229
SBC 92
SBC brake system 463
Activation 93
Deactivation 94
Driving hints 95
Messages in display 375, 376
Self-check 94
Warning lamp 92
Seat belt force limiter 72