MERCEDES-BENZ EQC SUV 2022 Owners Manual

Multimedia system:
4 © 5
Mercedes me & Apps
5 Dashcam #
If se veral USB devices are connected with the
multimedia system, select a USB device
(/ page 277). #
Select theIndividual recording orLoop
recording recording mode.
If Individual recording is selected andthe
memory is full there cording stops.
If Loop recording has been selected, se veral
short video /les are recorded. When the mem-
ory limit is reached, the oldest video /le is
dele ted and recording is continued automati-
call y. #
T To st o st art
art::select Start recording.
The length of there cording is shown. The
Please do not remove the storage medium.
message appears. The video /le is stored on
th e USB device. #
T To end:
o end: selectEnd recording . A
report may appear in thefo llowing cases:
R Forth eIndividual recording recording mode:
th e memory is full or there are only a few
minutes recording time available. The video
re cording stops or will be stopped imminent ly.
Change the USB device or dele tea video /le.
R If a video recording has star ted and a national
border is de tected, theNational border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries.
R The camera is not functional, theCamera
unavailable message appears.
Ha ve the camera checked in a Mercedes-Benz
service centre. T T
elephone
elephone T
T
elephony
elephony N
No
ot
tes on t
es on t elephony
elephony &
W
WARNING
ARNING Risk of dist raction from operat-
ing integ rated communication equipment
while theve hicle is in motion
If yo u operate communication equipment inte-
gr ated in theve hicle when driving, you could
be distracted from the tra1c situation. This
could also cause youto lose control of the
ve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y.278
278
MBUX multimedia system

&
W
W ARNI NG
ARNI NGRisk of accident from operating
mobile communication equipment while
th eve hicle is in motion
Mobile communication devices distract the
driver from the tra1c situation. This can also
cause the driver tolose control of theve hicle. #
As a driver, only operate mobile commu-
nication devices when theve hicle is sta-
tionar y. #
As a vehicle occupant, use mobile com-
munication devices only in the designa-
te d area, e.g. in there ar passen ger com-
partment. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating mobile communication equipment in
th eve hicle. &
W
W ARNING ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around and hit
vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cannot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe additional information on st owing
mobile communications devices cor rectl y:
R Loading theve hicle (/ page 109)
Blu et
Bluet ooth
oo th® ®
connection:
connection: The menu view and
theav ailable functions in the
te lephone menu are in part dependent on the
Blue tooth ®
pro/le of the connected mobile
phone. Full functionality is only available if the
mobile phone supports bo thofthefo llowing Blue-
to oth ®
pro/les:
R PBAP (Phone Book Access Pro/le)
- The contacts on the mobile phone are
shown automatically on the multimedia
system.
R MAP (Message Access Pro/le)
- The mobile phone message functions can
be used on the multimedia system.
Ir re specti veofthis, Blue tooth ®
audio functionality
can byused with any mobile radio unit.
Fo r information on thera nge of functions of the
mobile radio unit tobe connected, see the manu-
fa cturer's operating instructions.
N
N e etw
tw or
ork connection:
k connection: MBUX multimedia system
279
279

The
following cases can lead tothe call being dis-
connected while theve hicle is in motion:
R You switch into a transmission/reception sta-
tion, in which no communication channel is
free.
R The SIM card used is not compatible with the
network available
R A mobile phone with "Twincard" is log ged into
th e network with the second SIM card at the
same time
The multimedia system supports calls in HD
Vo ice ®
for impr oved speech qualit y.Arequ ire-
ment forth is is that the mobile phone and the
mobile phone network pr ovider of the person you
are calling support HD Voice ®
.
Depending on thequ ality of the connection, the
vo ice quality may 0uctuate.
Fu rther information can be obtained from a
Mercedes-Benz service cent reor at: https://
www.mercedes-benz.com/connect 280
280
MBUX multimedia system

T
T
elephone menu ov
elephone menu overerview
view 1
Blue tooth ®
device name of the cur rently con-
nected mobile phone/of the mobile phone
2 Blue tooth ®
device name of the cur rently con-
nected mobile phone/of the mobile phone
(two phone mode)
3 Battery status of the connected mobile phone
4 Signal strength of the mobile phone network
5 Options 6
Device manager
7 Messages
8 Numerical pad
9 Contact sear ch T
T elephon
elephon y oper
y operating modes ov
ating modes overerview
view
Depending on your equipment, thefo llowing tel-
ephony operating modes are available:
R A mobile phone is connected tothe multime-
dia system via Blue tooth ®
. MBUX multimedia system
281
281

R
Two mobile phones are connected with the
multimedia system via Blue tooth ®
(two phone
mode).
- You can use all the functions of the multi-
media system with the mobile phone in the
fo re ground.
- You can receive incoming calls and mes-
sages with the mobile phone in the bac k-
gr ound.
Yo u can inter change the mobile phone in
th efo re ground and backg round.
Connecting a mobile phone
Connecting a mobile phone
R R eq
eq uir
uir ements:
ements:
R Blue tooth ®
is activated on the mobile phone
(see the manufacturer's operating inst ruc-
tions).
R Bluetoo th®
is activated on the multimedia sys-
te m. Multimedia system:
4 © 5
Phone
Searc
Searc hing f
hing for a mobile phone
or a mobile phone #
Select í. #
Select Connect new device.
Connecting a mobile phone
Connecting a mobile phone
Au thorisation follo ws using secure simple pairing. #
Select a mobile phone.
A code is displa yed in the multimedia system
and on the mobile phone. #
If bo thcodes match, con/rm the code on the
mobile phone.
F F unctions in t
unctions in t he t
he telephon
elephon y menu
y menu
In thete lephony menu you ha vethefo llowing
functions, forex ample:
R Making calls, e.g.:
- R Accept a call
- k End call
- i Create conferen. call
- Accept or reject a waiting call R
Managing contacts, e.g.:
- Downloading mobile phone contacts
- Managing thefo rm at of a contact's name
- Saving a contact as a favo urite
R Receiving and sending messages, e.g.:
- Using there ad-aloud function
- Dictating a new message Mer
Mer
cedes me app
cedes me app Mer
Mer
cedes me calls
cedes me calls Making a call via t
Making a call via t
heov
he overerhead contr
head contr ol panel
ol panel
% Mercedes me calls are not possible in every
countr y.Find out at a Mercedes-Benz service
centre if these functions are available in your
countr y. 282
282
MBUX multimedia system

1
me button for service or information calls
2 SOS button co ver
3 SOS button (eme rgency call system)
Making a Mer
Making a Mer cedes me call
cedes me call #
Press me button 1. Making an emerg
Making an emerg
ency call
ency call #
Toopen the co ver of SOS button 2, press it
brie0y. #
Press and hold SOS button 3for at least one
second.
If a Mercedes me call is active, an emer gency call
can still be triggered. This has priority over all
ot her active calls.
Inf
Inf or
ormation about t
mation about t he Mer
he Mercedes me call
cedes me call
A call tothe Mercedes-Benz Customer Centre has
been initiated via the me button in theove rhead
control panel or the multimedia system
(/ page 282).
Using thevo ice dialogue system you access the
desired service:
R Accident and Breakdown Management
R Mercedes-Benz Cus tomer Cent reforge neral
information about theve hicle
Yo u can /nd information on thefo llowing topics:
R Activation of Mercedes me connect
R Operating theve hicle R
Nearest Mercedes-Benz service cent re
R Other products and services from Mercedes-
Benz
Data is transfer red during the connection tothe
Mercedes-Benz Customer Centre (/ page 285).
Calling t
Calling t he Mer he Mercedes-Benz Cust
cedes-Benz Cust omer Centre
omer Centre
using t
using t he multimedia syst
he multimedia syst em
em
R
R eq
eq uir
uir ements:
ements:
R Access toa mobile phone network is available.
R The cont ract partner's mobile network co ver-
age is available in there specti veregion.
R The vehicle must be switched on so that vehi-
cle data can be transfer red automaticall y.
Multimedia system: 4 © 5
Phone 5
g #
Call Mercedes me connect .
ATer con/rmation, the multimedia system
sends there qu ired vehicle data. The data
transfer is shown in the media displa y. MBUX multimedia system
283
283

Then,
you can select a service and be connected
to a specialist at the Mercedes-Benz Customer
Centre.
Calling t
Calling t he Mer he Mercedes-Benz Cust
cedes-Benz Cust omer Centr
omer Centre
eaTer
aTer
aut
aut omatic accident or br
omatic accident or br eakdo
eakdown det
wn det ection
ection
R
R eq
eq uir
uir ements:
ements:
R The vehicle has de tected an accident or break-
down situation.
R The vehicle is stationar y.
R The hazard warning lights are switched on.
% This function is not available in all countries.
The vehicle can de tect accident or breakdown sit-
uations under cer tain circumstances.
In theev ent an accident or breakdown is de tec-
te d, the emer gency guide sh ows saf ety no tes in
th e multimedia system displa y.
ATer quitting the emer gency guide display on the
multimedia system, a prom ptappears asking
whe ther youwo uld like toget support from the
Mercedes-Benz Customer Centre. #
Select Call.
R ATer your ag reement, or if the Mercedes
me connect service "Accident and Break-
down Management" is active, theve hicle
data is transfer red automatically
(/ page 287).
R The Mercedes-Benz Customer Centre
ta ke syo ur call and or ganises the break-
down and accident assistance.
Yo u may be charge dfo rth ese services.
% Depending on the se verity of the accident, an
automatic emer gency call can be initia ted.
This has priority over all other active calls.
% In addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prom ptcan appear aTer a delay in theev ent
of a breakdown. If you are already in contact
with the Mercedes-Benz Customer Centre or
ha ve already received support, this prom pt
can be ignored or declined.
% Ifyo u answer the prom ptfor support from the
Mercedes-Benz Customer Centre with Later,
th e message will be hidden and appear again
later. The prom
pttriggered bythe Mercedes me
connect service "Telediagnostics", can either
be con/ rmed or declined. ATer being
declined, this will not be shown again.
Arr Arr anging a ser
anging a ser vice appointment via a Mer
vice appointment via a Mer cedes
cedes
me call
me call
If yo u ha veactivated the maintenance manage-
ment service, releva nt vehicle data is transfer red
automatically tothe Mercedes-Benz Customer
Centre. You will then receive individual recom-
mendations rega rding the maintenance of your
ve hicle.
Re gardless of whe ther you ha veconsen tedto the
maintenance management service, the multime-
dia system reminds you aTer a cer tain amount of
time that a service is due. A prom ptappears ask-
ing if youwo uld like tomake an appointment. #
T To arr
o arr ang
ange a ser
e a ser vice appointment
vice appointment: :select Call.
ATer your ag reement, theve hicle data is
transfer red and the Mercedes-Benz customer
centre take syo ur prefer red appointment date.
The information is then sent toyour desired
service outlet. 284
284
MBUX multimedia system

This will contact
youto con/rm the appoint-
ment and if necessary consult about the
de tails.
% Ifyo u select LateraTerthe service message
appears, the message is hidden and reap-
pears at a later time.
Giving consent t
Giving consent t o dat
o data tr
a transf
ansf er dur
er dur ing a Mer
ing a Mer cedes
cedes
me call
me call
R R eq
eq uir
uir ements:
ements:
R There is an active Mercedes me call via the
multimedia system or the me button in the
ove rhead control panel (/ page 282).
% The prom pttocon/rm data transfer does not
appear in all count ries.
If th eAc cident/B reakdown Management and
Main tenance Mana gement services are not acti-
va ted on Mercedes me, theDo you want to trans-
mit vehicle data and the vehicle's position to
the Mercedes-Benz Customer Centre in order to
improve the processing of your request? mes-
sage is shown. #
Select Yes.
Re leva nt identi/cation data is transmitted
automaticall y.
More information on Mercedes me: https://
ww w.mercedes.me
T
T r
ransf
ansf err
erred dat
ed dat a dur
a during a Mer
ing a Mer cedes me call
cedes me call
When you make a service call via Mercedes me,
data is transmitted. This enables targ eted advice
and a smoo thservice.
The following requ irements must be ful/lled for
th e transfer of the data:
R The vehicle is switched on.
R The required da tatransfer tech nology is sup-
por tedby the mobile phone network pr ovider.
R The quality of the mobile connection is su1-
cient.
Multi-s tage transfer depends on thefo llowing fac-
to rs:
R Reason forth e initiation of the call
R The available mobile phone transmission tech-
nology.
R The activated Mercedes me connect services. R
The service selected in thevo ice control sys-
te m.
% A prom ptfor consent tothe data transfer only
occurs if the cor responding Mercedes me
connect service is not activated.
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e no
e no t activ
t activ at
ated
ed
If no Mercedes me connect services are activated
and the data pr otection prom pthas been con-
/rmed thefo llowing data is transmitted:
R Vehicle identi/cation number
R Time of the call
R Reason forth e initiation of the call
R Con/ rmation of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle MBUX multimedia system
285 285

If a call is made
for a service appointment via the
service reminder, thefo llowing data is also trans-
mitted:
R Current mileage and maintenance data
If a call is made aTer automatic accident or break-
down de tection using the multimedia system, the
fo llowing data is also transmitted:
R Current mileage and maintenance data
R Current vehicle location
If Ac cident and Breakdown Management is called
via thevo ice control system and no service has
been activated, but the data pr otection query has
been con/ rmed, thefo llowing data can also be
called up from theve hicle bythe Mercedes-Benz
Customer Centre:
R Current vehicle location
If th e data pr otection prom pthas been rejec ted,
th efo llowing data is transmitted toenable targe-
te d advice and an e1cient service:
R Reason forth e initiation of the call
R Rejection of the data pr otection prom pt
R Country indicator of theve hicle R
Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e activ
e activ at
ated
ed
Only if there specti veservice is activated will
additional incident-speci/c data be transmit ted in
th e second stage toenable an optimal service.
An overview of the data transmitted can be found
in there specti veterm s of use for Mercedes me
connect services. These can be obtained in the
Mercedes me por tal: https://
me.secure.mercedes-benz.com
Dat
Dat a pr a pr ocessing
ocessing
The data transmitted within the scope of the call
is dele ted from the processing system aTer the
call is /nished, in so far as this data is not being
used forot her activated Mercedes me connect
services.
The incident-speci/c data is processed and stored
in the Mercedes-Benz Customer Centre and, if
re qu ired toprocess the incident, forw arded tothe
service partner authorised bythe Mercedes-Benz
Customer Centre. Please take note of the data pr
otection information on the Mercedes me Inter-
net page https://www.mercedes.me or in the
re corded message immediately aTer calling the
Mercedes-Benz Customer Centre.
% The recorded message is not available in
ev ery countr y. Mer
Mer
cedes me connect
cedes me connect Inf
Inf
or
ormation on Mer
mation on Mer cedes me connect
cedes me connect
% Mercedes me connect or individual Mercedes
me connect services are not available in every
countr y.Find out at a Mercedes-Benz service
centre if these functions are available in your
countr y.
Mercedes me connect consists of multiple ser v-
ices.
Yo u can use thefo llowing services via the multi-
media system and theove rhead control panel, for
ex ample:
R Accident and Breakdown Management (me
button or situation-dependent display in the
multimedia system) 286 286
MBUX multimedia system

R
Mercedes-Benz eme rgency call system (auto-
matic emer gency call and SOS button)
The Mercedes me connect Accident and Break-
down Management and the Mercedes-Benz emer-
ge ncy call centre are available toyou around the
cloc k.
The me button and the SOS button can be found
on theve hicle's overhead control panel
(/ page 282).
Yo u can also call the Mercedes-Benz Customer
Centre using the multimedia system
(/ page 283).
Please no tethat Mercedes me connect is a
Mercedes-Benz service. In emer gencies, /r stcall
th e national emer gency services using the stand-
ard national emer gency service telephone num-
bers. In emer gencies, you can also use the
Mercedes-Benz eme rgency call system
(/ page 292).
Obser vethe conditions of use for Mercedes me
connect and other services. These can be
obtained in the Mercedes me Portal: https://
me.secure.me rcedes-benz.com Fu
rther information about Mercedes me connect,
th e pr ovided service scope and operation:
https://moba.i.daimler.com/mar kets/ece-r ow/
baix/cars/connectme/en_GB/#emotions/
St artsei te.html
Inf
Inf or ormation on Mer
mation on Mer cedes me connect A
cedes me connect A ccident
ccident
and Br and Br eakdo eakdown Manag
wn Manag ement
ement
The Accident and Breakdown Management can
include thefo llowing functions:
R Supplement tothe Mercedes-Benz emer gency
call system (/ page 292)
If necessar y,the contact person at the
Mercedes-Benz eme rgency call centre for-
wa rdsth e call toMercedes me connect Acci-
dent and Breakdown Management. Forw ard-
ing the call is ho wever not possible in all coun-
tries.
R Breakdown assistance byate ch nician on
location and/or theto wing away of theve hicle
to the nearest Mercedes-Benz service centre
Yo u may be charge dfo rth ese services. R
Addition tothe emer gency guide aTer auto-
matic accident or breakdown de tection
(/ page 284)
In theev ent of a breakdown or accident, fur-
th er vehicle data is sent which enables optimal
support bythe Mercedes-Benz Customer
Centre and the authorised service partner or
breakdown assistance.
R Addition tothe Mercedes me connect service
Te lediagnostics
Wi th th eTe lediagnostics function, speci/c
we ar and failure reports are recorded bythe
service pr ovider, in so far as these can be
clear lyinterpr eted and are available thro ugh
th e monitoring of components that are subject
to diagnostics.
If yo ur vehicle de tects a breakdown or thre at
of a breakdown, you may be prom pted via the
multimedia system tocontact the Mercedes-
Benz Customer Centre for fur ther help. This
prom ptinthe multimedia system only appears
when theve hicle is stationar y. MBUX multimedia system
287
287