reset MERCEDES-BENZ EQC SUV 2022 Owners Manual

Oper
Oper
ating safe
ating safe ty
ty &
W
W ARNING
ARNING Risk of accident due tomal-
functions or system failures
If yo u do not ha vethe prescribed service/
maintenance workor any requ ired repairs car-
ri ed out, this could result in malfunctions or
system failures. #
Always ha vethe prescribed service and
maintenance workas well any requ ired
re pairs car ried out at a quali/ed special-
ist workshop. &
W
W ARNING
ARNING Risk of accident or injury due
to improper modi/cations toelectronic
components
Modi/cations toelectronic components, their
soTware or wiring can impair their functional-
ity and/or the functionality of other networ ked
components or saf ety-re leva nt systems.
This can endanger theve hicle's operating
saf ety. #
You must not tamp er with wiring, elec-
tronic components, or their soTware. #
Always ha veworkon electrical and elec-
tronic devices car ried out at a quali/ed
specialist workshop. If
yo u modify the on-board electronics, thege n-
eral ope rating permit is rendered in valid.
Obser vethe "On-board electronics" section in
"Technical data".
* N
NOOTE
TE Impairment of the operating e1-
ciency of theve hicle or individual compo-
nents due totamp ering with the on-board
electronics The
vehicle is equipped bythe manufacturer
with various saf ety mechanisms that interact
with each other. If
th e system de tects tamp ering with the on-
board electronics due toan unau thorised
modi/cation of control units and/or their soT-
wa re/data, this may ha vethefo llowing
e.ects:
R Individual vehicle functions are (tempora-
ri ly ) no lon ger operational.
R The overallve hicle is (temporarily) no lon-
ge r operational. #
Have theve hicle checked immediately at
a qu ali/ed specialist workshop and, if
necessar y,reset tofactory settings. *
N
NOOTE
TE Damage totheve hicle due todriv-
ing toofast and due toimpacts tothe
ve hicle underbody and suspension com-
ponents In
thefo llowing situations, in particular, there
is a risk of damage totheve hicle:
R theve hicle becomes grounded, e.g. on a
high kerb or an unpa vedro ad Gene
ral no tes
21
21

identi/cation number
tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also
uses operational data from theve hicle, fore xa m-
ple, forre calls. These data can also be used to
ex amine the customer's warranty and guarantee
claims.
Fa ult memories in theve hicle can be reset by a
service outl etor at your requ est as part of repair
or maintenance work.
Conv Conv enience and inf ot
enience and inf otainment functions
ainment functions
Yo u can store con venience settings and individual
settings in theve hicle and change or reset them
at any time.
Depending on theve hicle equipment, this
includes thefo llowing settings, fore xamp le:
R seat and steering wheel positions
R suspension and climate control settings
R individual settings, suchas interior lighting
Depending on the selected equipment, you can
import data into vehicle inf otainment functions
yo urself. Depending on
theve hicle equipment, this
includes thefo llowing data, fore xa mpl e:
R multimedia data, suc has music, /lms or pho-
to sfo r playback in an integ rated multimedia
system
R address book data for use in connection with
an integ rated hands-free system or an integ ra-
te d navigation system
R entered navigation destinations
R data about the use of Internet services
These data for con venience and inf otainment
functions may be sa ved locally in theve hicle or
th ey may be located on a device which you ha ve
connected totheve hicle, suc has a smartphone,
USB 0ash drive or MP3 pla yer.Ifyo u ha veentered
th ese data yourself, you can dele tethem at any
time.
This data is transmitted from theve hicle tothird
parties only at your requ est. This applies, in par-
ticular, when you use online services in accord-
ance with the settings that you ha veselected. Smar
Smar tphone int tphone int egr
egr ation (e.g. Andr
ation (e.g. Andr oid A
oid Aut
uto or
o or
Apple CarPlay
Apple CarPlay ®
®
)
)
If yo ur vehicle is accordingly equipped, you can
connect your smartphone or ano ther mobile end
device totheve hicle. You can then control them
by means of the control elements integ rated in
th eve hicle. Images and audio from the smart-
phone can be output via the multimedia system.
Cer tain information is simultaneously transfer red
to your smartphone. Depending on the type and
integ ration, thisincludes position data, day/night
mode and other general vehicle statuses. For
more information please consult the Owner's
Manual of theve hicle/inf otainment system.
This integ ration allo ws the use of selected smart-
phone apps, suc has navigation or music pla yer
apps. There is no fu rther interaction between the
smartphone and theve hicle; in particular, vehicle
data is not directly accessible. The type of addi-
tional data processing is de term ined bythe pro-
vider of the app being used. Which settings you
can make, if an y,depends on the speci/c app and
th e operating system of your smartphone. General no
tes
37 37

When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
This function is available for around four minutes
or until a front door is opened.
A A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. V
V ehicles wit
ehicles wit h a sliding sunr
h a sliding sunroof: oof:the side windo ws
will be closed comple tely ifth e sliding sunroof is
open.
If th e side windo wsare obstructed during auto-
matic closing, the side window concerned will
open again slightl y.ATer an other automatic clos-
ing process, the automatic function forth e sun-
ro of and side windo wsmay be deactivated. The
automatic function will be active again the next
time theve hicle is star ted. Conv Conv
enience opening (v
enience opening (v entilating t
entilating the v
he vehicle
ehicle
bef
bef or
ore st
e st ar
arting a jour
ting a jour ne
ney)
y) &
W
WARNING
ARNING Risk of entrapment when open-
ing a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. #
When opening, make sure that nobody is
to uching the side windo w. #
Release the button immediately if some-
body becomes trapped. 88
88
Opening and closing

#
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:pressthe3
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:brie0y press
th e3 button in any direction.
The opening/closing process will be stopped.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he sliding sun-
he sliding sun-
r
r oof
oof
If an obstacle obstructs the sliding sunroof during
th e closing process, the sliding sunroof will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W WARNING
ARNING Risk of becoming trapped
despite there ve rsing function being active
In particular, there ve rsing function does not
re act:
R tosoT, light and thin objects, e.g. /n gers.
R towa rdsth e end of the closing procedure. R
during resetting. #
During the closing process, make sure
th at no body parts are in the closing
area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during automatic operation.
The closing process will be stopped. A A
ut
ut omatic functions of t
omatic functions of t he sliding sunr
he sliding sunroof
oof The sliding sunroof will be closed automatically
when
theve hicle has been switched o. in thefo l-
lowing situations:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage) R
ifth ere is a malfunction in the po wer supply
The sliding sunroof will rise at there ar in order to
continue ventilating theve hicle interior.
If th e sliding sunroof is obstructed during an auto-
matic closing procedure, thero of will be opened
again slightl y.The automatic function forth e slid-
ing sunroof and the side windo wswill then be
deactivated. R R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If th e sliding sunroof is closed again immedi-
ately aTer it has been bloc ked or reset, it will
close with increased forc e. #
Make sure that no parts of the body are
in the closing area. #
Release the button immediately if some-
body becomes trapped.
or 92
92
Opening and closing

#
Brie0y press the button in any direction
during the automatic closing process.
The closing process will be stopped. The sliding sunr
The sliding sunr
oof canno
oof cannot be closed and y
t be closed and y ou can-
ou can-
no
no t see t
t see t he cause.
he cause.
If th e sliding sunroof is obstructed during closing
and reopens again slightl y: #
Immediately aTer automatic reve rsing, pull
and hold the3 button down again tothe
point of resis tance until the sliding sunroof is
closed.
The sliding sunroof will be closed with
increased forc e.
If th e sliding sunroof is obstructed again and
opens again slightl y: #
Repeat the pr evious step.
The sliding sunroof will be closed again with
increased forc e.
V V ehicles wit
ehicles wit hout a panor
hout a panor ama sliding sunr
ama sliding sunr oof: t
oof: the
he
sliding sunr
sliding sunr oof is no
oof is not oper
t operating smoot
ating smoot hly
hly.
. #
Reset the sliding sunroof.
R
R ese
ese tting t
tting t he sliding sunr
he sliding sunr oof
oof #
Push the3 button up tothe point of resist-
ance repeatedly until the sliding sunroof is
fully open. #
Press the3 button for ano ther second. #
Close the sliding sunroof. R
R
oller sunblinds
oller sunblinds Ext
Ext
ending t
ending t he r
he rear side windo
ear side windo w r
w roller sunblinds
oller sunblinds *
N
NOOTE
TE Damage tothe inertia reel due toit
snapping back If suddenly snapped bac
k, the inertia reel may
be damaged. #
Always mo vethero ller sun blind by
hand. #
Do not drive with thero ller sun blind
hooked in and rear side wind ows opened
at the same time. #
Pull thero ller sunblind out bytab1 and hook
it onto brac kets 2 attheto p of the windo w. Anti-t
Anti-theT
heTprot
pr otection
ection F
F
unction of t
unction of t he immobiliser
he immobiliser The immobiliser pr
events your vehicle from being
star ted without the cor rect key. Opening and closing
93
93

#
Brie0y press memory but tonV andthen
press preset position 4,TorU
within thre e seconds.
An acoustic signal sounds. The settings are
stored. #
T To call up:
o call up: press and hold preset position but-
to n4, TorU until all the systems
are in the stored position.
% When youre lease the preset position button,
steering wheel, the seat and mir ror setting
functions stop immediatel y.The head-up dis-
play continues tobe adjus ted. S
S
t
to
o w
w ag
ag e ar
e ar eas
eas N
No
ot
tes on loading t
es on loading t he v
he vehicle
ehicle &
W
WARNING
ARNING Risk of inju ryfrom unsecured
items in theve hicle
If objects, lug gage or loads are not secured or
not secured su1cient ly,they could slip, tip
ov er or be thro wn around and thereby hit vehi-
cle occupants. There is a
risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects in such a wayth at
th ey cannot be thro wn around. #
Before the journe y,secure objects, lug-
ga ge or loads against slipping or tipping
ove r. &
W
WARNI NG
ARNI NGRisk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone brac kets cannot alw aysreta in all
objects they contain.
There is a risk of injur y,particular lyin the
eve nt of braking manoeuvres or abrupt
ch anges in direction. #
Always st owobjects so that they cannot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Stow and secure objects that are heavy,
hard, poin ted, sharp-edged, fragile or too
lar ge inthe load compartment. &
W
WARNING
ARNING Risk of accident from objects in
th e driver's foot we ll and front-passenger
fo ot we ll
Objects in the driver's foot we ll and front-
passenger foot we ll may impede pedal tr avel or
block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll or front-passenger foot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there Seats and st
owing
109 109

#
If necessar y,reset the driver's or front
passenger seat.
F
F olding bac
olding bac k t
k the r
he r ear seat bac
ear seat bac kr
krest
est &
W
WARNING
ARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. *
N
NOOTE
TE Damage caused bytrapping the
seat belt when folding back the seat bac k-
re st The seat belt could become trapped and
thus
be damaged when the seat backrest is folded
bac k. #
Make sure that the seat belt is not trap-
ped when folding back the seat backrest. #
Movethe driver's or front passenger seat for-
wa rds, if necessar y. #
Foldthe cor responding seat backrest 1back
until it engages.
LeT LeT and r
and r ight seat bac
ight seat bac kr
kres
es ts:
ts: ifth e seat bac k-
re st is not engaged and lo cked in place, this
will be shown on the multifunction display on
th e inst rument cluster.
A wa rning tone will also sound. Centr
Centr
e seat bac
e seat bac kr
krest:
est: ifth e seat backrest is
not engaged and loc ked in place, there d lock
ve ri/cation indicator 2will be visible.
Loc
Loc king t
king t he r
he release catc
elease catc h of t
h of the centr
he centr e r
e rear seat
ear seat
bac
bac kr
krest
est
R
R eq
equir uir ements:
ements:
R The leT and centre seat backrests are
engage d and joined toget her.
Yo u can lock the centre seat backrest release
catch if youwa nttosecure the load compartment
against unauthorised access. The centre seat
backrest can then be folded forw ards only
to get her with the leT seat backrest. 114 114
Seats and st
owing

F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1 . A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Use button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
V
V ehicles wit
ehicles wit hout electr
hout electr icall
icall y f
y folding outside
olding outside
mirr
mirr or
ors:
s: manually mo vethe outside mir ror into
th e cor rect position. #
V
V ehicles wit
ehicles wit h electr
h electricall
ically f
y folding outside mir-
olding outside mir-
r
r ors
ors: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. The electrolyte is hazardous
tohealth and cau-
ses ir rita tion. It must not come into contact
with your skin, eyes, respiratory or gans or
clo thing or be swallo wed. #
Ifyo u come into contact with electrolyte,
obser vethefo llowing:
R Immediate lyrinse the electrolyte
from your skin with water and seek
medical attention.
R If electrolyte comes into contact with
yo ur eyes, immediately rinse them
th oroughly with clean water and seek
medical attention.
R Ifth e electrolyte is swallo wed, imme-
diately rinse your mouth out thor-
oughl y.Do not induce vomiting. Seek
medical attention immediatel y.
R Immediately change out of clo thing
which has been contaminated with
electrolyte.
R If an allergic reaction occurs, seek
medical attention immediatel y.140 140
Light and sight

T
T
em
em per
per atur
atur e contr
e contr ol indicat
ol indicat or
or3
3 Display
Display
Meaning
Meaning
Lights up redT hegreen LED 0ashes
simultaneousl y:ove r-
te mp erature – the
ch arging per form ance
is reduced.
The green LED does
not 0ash: overtemper-
ature – thech arging
process is stopped.
Flashes redO vertemperature at
th e mains plug – the
ch arging process is
stopped. Safe
Safe
ty syst
ty syst em indicat
em indicat or
or4
4 Displ
ay
Display Meaning
Meaning
Flashes redC harging cable mal-
function – cann ot
car ryout thech arging
process, reset the
ch arging cable operat-
ing unit.
Lights up redW hite LED is o.:
po we r supply malfunc-
tion – cannot car ry
out thech arging proc-
ess, replace the mains
soc ket.
White LED is on: vehi-
cle malfunction – can-
not car ryout the
ch arging process,
re set thech arging
cable operating unit. When all
four displa yslight up, thech arging cable
operating unit per form s a self-test. If
te mp erature monitor 3indicates a malfunc-
tion, it may help toprotect thech arging cable
from direct sunlight.
T T o r
o r ese
ese t t
t the c
he c har
harging cable oper
ging cable oper ating unit:
ating unit:if
saf ety sy stem 4indicates a charging cable mal-
function or a vehicle malfunction, /rst reset the
ch arging cable operating unit. Todo this, discon-
nect thech arging cable from theve hicle and from
th e mains soc ket and waitfor appr oximately /ve
seconds. If the malfunction persists aTer the
ch arging cable is reconnected, charging at the
mains soc ket is not possible. The charging cable
must be replaced or theve hicle plug must be
ch ecked at a quali/ed specialist workshop,
depending on the indicator. F
F
unctions of t
unctions of t he indicat
he indicator lam
or lamps on t
ps on t he v
he vehicle
ehicle
soc ket
soc ket %
Depending on the national version, your vehi-
cle is equipped with one of thefo llowing vehi-
cle soc kets.
The soc ket 0ap is centrally loc ked and unloc ked
to get her with theve hicle. 174
174
Driving and parking

a break where necessar
y.Ifyo u do not take a
break and ATTENTION ASSIST continues todetect
increasing lapses in concentration, you will be
wa rned again aTer a minimum of 15 minutes. Yo
u can ha vethefo llowing status information for
AT TENTION ASSIST displa yed in the assistance
menu of the on-board computer:
R The length of the journey since the last break.
R The attention le vel de term ined byATTENTION
ASSIS T.
If AT TENTION ASSIST is unable tocalculate the
attention le vel and cannot issue a warning, the
System suspended message appears. If a
warning is given in the Instrument Displa y,the
multimedia system o.ers tosear chfor a rest
area. You can select a rest area and start naviga-
tion tothis rest area. This function can be acti va-
te d and deactivated in the multimedia system.
If AT TENTION ASSIST is deactivated, theÛ
symbol appears in the assistance graphic in the
Instrument Displ ay. ATer theve hicle is star ted,
AT TENTION ASSIST is automatically activated. The
last selected sensitivity le velre mains stored.
Sy
Sy st
stem limits
em limits
AT TENTION ASSIST is active in the 60 km/h to
200 km/h speed range.
Pa rticular lyin thefo llowing situations, ATTENTION
ASSIST only functions in a restric ted manner and
wa rnings may be dela yed or not occur:
R Ifyo u ha vebeen driving for less than appr ox-
imately 30 minutes.
R Ifth ero ad condition is poor (une venro ad sur-
fa ce or po tholes).
R Ifth ere is a strong side wind.
R Ifyo u adopt a sporty driving style (high corner-
ing speeds or high rates of acceleration). R
IfAc tive Steering Assist is activated and active
(/ page 209).
R Ifth e time has been set incor rectl y.
R Ifyo uch ange lanes and vary your speed fre-
qu ently in active driving situations.
The ATTENTION ASSIST dr owsiness or alertness
assessment is reset and restar ted when continu-
ing the journey in thefo llowing situations:
R Ifyo u switch o. theve hicle.
R Ifyo u unfasten your seat belt and open the
driver's door (e.g. tochange drivers or take a
break).
Se
Se tting A
tting A TTENTION ASSIST
TTENTION ASSIST
Multimedia system:
4 © 5
Settings 5
Assistance
5 Attention Assist
Se
Se tting op
tting op tions
tions #
Select Standard, SensitiveorOff.
Sugg Sugg es esting a rting a r es
est art ar ea
ea #
Select Suggest rest area. Driving and parking
199
199