buttons MERCEDES-BENZ G-Class 2012 W463 Owner's Manual

Sockets
Front-passenger footwell ...............196
Luggage compartment ................... 196
Rear compartment ......................... 196
SOS
see mbrace

Spare fuses ........................................ 238
Spare wheel Mounting ....................................... 226
Notes/data .................................... 268
Spare wheel bracket at the rear ....225
Stainless-steel spare hub cap ........ 225
Specialist workshop ............................ 20
Speedometer Additional speedometer (on-
board computer) ............................ 156
Setting the unit (on-board
computer) ...................................... 159
SPEEDTRONIC
Display message ............................ 174
SRS (Supplemental Restraint
System)
Display message ............................ 167
Introduction ..................................... 32
Warning lamp ................................. 183
Warning lamp (function) ................... 32
Standard display (on-board
computer) .......................................... 156
Starting the engine Important safety notes .................. 115
Station
see Radio
Status line (on-board computer)
Selecting the display ...................... 159
Steering wheel
Adjusting ......................................... 82
Buttons (on-board computer) ......... 153
Cleaning ......................................... 221
Important safety notes .................... 81
Steering wheel heating .................... 82
Storing settings (memory
function) .......................................... 85
Steering wheel heating
Indicator lamp (malfunction) ............ 83
Stowage compartments
Armrest (under) ............................. 189
Cup holders ................................... 193Glove box
....................................... 189
Important safety information
.........189
Stowage pockets ........................... 190
Submenu (on-board computer)
Convenience .................................. 161
Vehicle ........................................... 161
Summer opening
see Convenience opening feature
Summer tires ..................................... 244
Sun visor ............................................ 194
Supplemental Restraint System see SRS (Supplemental Restraint
System)
Surround lighting
Switching on/off (on-board
computer) ...................................... 160
SUV
(Sport Utility Vehicle) .......................19
Switching air-recirculation mode
on/off ................................................. 110
Switching off the alarm (ATA) ............57 T
Tachometer ........................................ 152
Tail lamps see Lights


Tail lamps (Display message) ........... 170
Technical data G 500 ............................................. 277
G 55 AMG ...................................... 277
Tires ............................................... 266
Wheels ........................................... 266
TELEAID
Call priority .................................... 202
Display message ............................ 167
Downloading destinations
(COMAND) ..................................... 202
Emergency call .............................. 199
Important safety notes .................. 198
Locating a stolen vehicle ............... 203
MB info call button ........................ 201
Roadside Assistance button .......... 200
Self-test ......................................... 198
System .......................................... 198
Vehicle remote unlocking .............. 202
Telephone
Menu (on-board computer) ............ 163 Index
13

Overhead control panel
Function Page
:
SOS button (mbrace
system:
the
emergency call
system is called TELEAID in
Canada.) 199
;
Switches the cargo
compartment lamp/rear
interior lighting on/off
93
=
Switches the right-hand
reading lamp on/off
93
?
Opens/closes the sliding
sunroof
70
A
Switch (controls the
interior lighting)
92
B
Rear-view mirror
84 Function Page
C
Transmitter buttons for the
garage door opener
204
D
Indicator lamp for the
garage door opener
204
E
Microphone for mbrace
(the
emergency

call system
is called TELEAID in
Canada), telephone and
Voice Control System (see
the separate operating
instructions) F
Switches the left-hand
reading lamp on/off
93Overhead control panel
29
At a glance

X
Pull the seat belt smoothly from the inertia
reel.
X Engage fixed seat belt tongue ? in
buckle ;. X
Pull movable seat belt tongue C and route
the seat belt across your body. Without
twisting it, guide the shoulder section of the
seat belt across the middle of your shoulder
and the lap section across your hips.
X Engage movable seat belt tongue C in
buckle A.
X If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body. For more information about releasing the seat
belt with release buttons
B and =, see
"Releasing seat belts" (
Y

page 46).
Special seat belt retractor
All seat belts in the vehicle with the exception
of the driver's are equipped with a special
seat belt retractor, to which a child restraint
system can be secured. For further
information on special seat belt retractors,
see ( Y page 49).
Belt height adjustment You can adjust the belt height on the driver's
and front-passenger seat, as well as on the
outer rear seats.
Adjust the height so that the upper part of the
seat belt is routed across the center of your
shoulder.
X
To raise: slide the belt sash guide upwards.
The belt sash guide engages in various
positions.
X To lower:

pull belt sash guide release :
forwards and hold it.
X Slide the belt sash guide downwards.
X Release belt sash guide release : and
make sure that the belt sash guide has
engaged. Occupant safety
45
Safety Z

2. This device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
i Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. this
device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
Locking and unlocking centrally The SmartKey centrally locks/unlocks:
R
the doors
R the rear door
R the fuel filler flap :
& To lock the vehicle
; % To unlock the vehicle
When unlocking, the turn signals flash once.
When locking, they flash three times.
X To unlock centrally: press the %
button. If you do not open a door or the tailgate within
approximately 40 seconds of unlocking the
vehicle:
R
the vehicle is locked again.
R the theft
deterrent locking system is armed
again.
X To lock centrally: press the & button. Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that only the driver's
door and

the fuel filler flap are unlocked. This
is useful if you frequently travel on your own.
X To change the setting: press and hold
down the % and & buttons
simultaneously for approximately six
seconds until battery check lamp flashes
twice.
The SmartKey now functions as follows:
X To unlock the driver's door and fuel
filler flap: press the % button once.
X To unlock centrally: press the %
button twice.
X To lock centrally: press the & button. Restoring the factory settings
X Press the % and & buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice. Mechanical key
General notes If the vehicle can no longer be unlocked with
the SmartKey, use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the SmartKey
61
Opening/closing Z

arrow until battery tray cover
: opens. Do
not hold the cover closed while doing so. X
Remove the cover of the battery tray.
X Repeatedly tap the SmartKey against your
palm until battery = falls out.
X Insert the new battery with the positive
terminal facing upwards. Use a lint-free
cloth to do so.
X Insert the front tabs of the battery tray's
cover first, and then press to close it.
X Check the function of all SmartKey buttons
on the vehicle. SmartKey
63
Opening/closing Z

Do not drive the vehicle without the seat head
restraints. Head restraints are intended to
help reduce injuries during an accident.
! To avoid

damage to the seats and the seat
heating, observe the following information:
R do not spill any liquids on the seats. If
liquid is spilled on the seats, dry them as
soon as possible.
R if the seat covers are damp or wet, do not
switch on the seat heating. The seat
heating should also not to be used to dry
the seats.
R clean the seat covers as recommended;
see the "Interior care" section.
R do not transport heavy loads on the
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
R when the seat heating is in operation, do
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
! When the rear bench seat is folded
forwards, the front seats cannot be moved
to their rearmost position. You could
otherwise damage the seats and the rear
bench seat.
! Make sure that the sun visor is folded up
before adjusting the backrest and head
restraint height. The head restraint and sun
visor could otherwise collide when the head
restraint is fully extended.
i If the front door is open, the seats can be
adjusted for up 30 minutes after the
ignition has been switched off.
i The head restraints in the front and rear
seats can be removed ( Y page 78). Please contact an authorized Mercedes-
Benz Center for more information.
i You can find further information about
enlarging the cargo compartment (folding
the rear bench seat forwards) on
(Y page 190). Adjusting the seats electrically
General notes The buttons are located on the door control
panel.
:
Head restraint height
; Backrest angle
= Seat fore-and-aft adjustment
? Seat cushion angle
A Seat height
X Turn
the SmartKey to position
1 or
2
in the
ignition lock.
Seat fore-and-aft adjustment !
Before moving the front passenger seat
forward, make sure that the cup holder on
the center

console is folded down and that
the cup holder on the armrest has been
removed. Otherwise, the front passenger
seat or the cup holders may be damaged.
X Slide the button forwards or back in the
direction of arrow =.76
Seats
Seats, steering wheel and mirrors

Problems with the seat heating
If one or all of the indicator lamps in the seat
heating button are flashing, the seat heating
has switched off automatically. The vehicle's
electrical system voltage is too low because
too many electrical consumers are switched
on.
X
Switch off electrical consumers which you
do not need, such as the rear window
defroster or interior lighting.
Once the
battery is sufficiently charged, the
seat heating will switch back on
automatically. Switching the seat ventilation on/off
Switching on/off Seat ventilation is only available for the front
seats.
The
three

blue indicator lamps in the buttons
indicate the ventilation level you have
selected.
i If the battery voltage is too low, the seat
ventilation may switch off. X
Make sure that the SmartKey is in position
2 in the ignition lock.
X To switch on: press button : repeatedly
until the desired ventilation level is set.
i If you open the side windows and the
sliding sunroof using the SmartKey
(Y page 69), the driver's seat ventilation
automatically switches

to the highest level.X
To switch off: press button : repeatedly
until all the indicator lamps go out.
Problems with the seat ventilation If one or all of the indicator lamps in the seat
ventilation button are flashing, the seat
ventilation has switched off automatically.
The vehicle's electrical system voltage is too
low because too many electrical consumers
are switched on.
X
Switch off electrical consumers that you do
not need, such as the rear window
defroster or interior lighting.
Once the

battery is sufficiently charged, the
seat ventilation will switch back on
automatically. Steering wheel
Important safety notes
You can

adjust the steering wheel electrically. G
WARNING
Do not adjust the steering wheel while driving.
Adjusting the steering wheel while driving
could cause the driver to lose control of the
vehicle.
The electrical steering wheel adjustment
feature can be operated at any time.
Therefore, do not leave children unattended
in the vehicle, or with access to an unlocked
vehicle. A child's unsupervised access to a
vehicle could result in an accident and/or
serious personal injury.
When you adjust the steering wheel, make
sure that:
R the steering wheel can be reached with
your arms slightly bent.
R you can move your legs freely.
R you can see all the displays in the
instrument cluster clearly. Steering wheel
81
Seats, steering wheel and mirrors Z

Problems with the steering wheel
heating
If steering wheel heating indicator lamp
; is
flashing, the steering wheel heating has
switched off automatically. The vehicle's
electrical system voltage is too low because
too many electrical consumers are switched
on.
X Switch off electrical consumers which you
do not need, such as the rear window
defroster or interior lighting.
Once the
battery is sufficiently charged, the
steering wheel heating will switch back on
automatically. Steering wheel EASY-ENTRY/EXIT
feature
General notes The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature in the on-board
computer (Y page 161).
Important safety notes
G
WARNING
You must make sure no one can become
trapped or injured by the moving steering
wheel when the EASY-ENTRY/EXIT feature is
activated.
To stop steering maneuver do one of the
following:
R press the steering column adjustment
switch.
R press one of the memory function position
buttons.
R press the memory button.
Do not leave children unattended in the
vehicle, or

with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the EASY-ENTRY/ EXIT feature. This could result in an accident
and/or serious personal injury.
G
WARNING
Let the system complete the adjustment
procedure before setting the vehicle in
motion. All steering wheel adjustment must
be completed before setting the vehicle in
motion. Driving off with the steering wheel
still adjusting could cause the driver to lose
control of the vehicle.
! Do not activate the EASY-ENTRY/EXIT
feature, if

the seat backrest is reclined too
far backwards. This can damage the front
or rear seats. You must first move the
backrest to a vertical position.
Position of the steering wheel when the
EASY-ENTRY/EXIT feature is active The steering wheel moves upwards and
towards the dashboard if:
R
you remove

the SmartKey from the ignition
lock or
R you open the driver's door with the
SmartKey in position 0 or 1 in the ignition
lock.
i The steering wheel only moves upwards
and towards the dashboard if it has not
already reached the upper end stop.
Position of the steering wheel for
driving The steering wheel is moved to the last
selected position when:
R
the driver's door is closed.
R you insert the SmartKey into the ignition
lock
The last position of the steering wheel is
stored when you switch off the ignition or
when you store the setting with the memory
function ( Y page 85). Steering wheel
83
Seats, steering wheel and mirrors Z

Parking position for the exterior
mirror on the front-passenger side
General notes To make it easier to park, you can store the
front-passenger side exterior mirror position
in
such
a way that you can see the rear wheel
on that side as soon as you engage reverse
gear R.
Using the memory buttons on the driver's
side, you can store three parking positions
per key.
Setting and storing the parking position :
Adjustment button
; Right-hand exterior mirror
= Left-hand exterior mirror
? Memory button
X Make
sure that the vehicle is stationary and
that the SmartKey is in position 1 or 2 in
the ignition lock.
X Press button ; for the exterior mirror on
the front-passenger side.
X Engage reverse gear R.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X Use adjustment button : to adjust the
exterior mirror to a position which allows
you to see the rear wheel and the curb.
X Press memory button ? and adjustment
button : within three seconds.
The parking

position is stored if the exterior
mirror does not move. i
If the

mirror moves out of position, repeat
the steps.
i If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
Calling up a stored parking position
setting X
With the SmartKey in position
2 in the
ignition lock

and the exterior mirror on the
front-passenger side activated, engage
reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R as soon as you exceed a speed of
10 km/h
R about ten seconds after you have
disengaged reverse gear R
R if you press button = for the exterior
mirror on the driver's side Memory functions
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
R position of the seat, backrest and head
restraint
R driver's side: steering wheel position
R driver's side: position of the exterior
mirrors on

the driver's and front-passenger
sides G
WARNING
Do not activate the memory function while
driving. Activating

the memory function while
driving could cause the driver to lose control
of the vehicle. Memory functions
85
Seats, steering wheel and mirrors Z

The buttons are located on the door control
panel.
X
Make sure that the SmartKey is in position
2 or that the respective door is open.
X Adjust the seat ( Y page 76) and head
restraint ( Y page 77).
X On the driver's side, adjust the steering
wheel (Y
page 82) and the exterior mirrors
(Y page 84).
X Press memory button ;.
X Press one of memory buttons :1, 2 or 3
within three seconds.
The settings are stored in the selected
storage position. Calling up a stored setting
X Press and hold the relevant memory button
1, 2 or 3, until the seat, head restraints,
steering wheel

and mirrors are in the stored
position.
i The setting procedure is interrupted as
soon as you release the memory button.
! If you

want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest using the seat
switch. The seat could otherwise be
damaged. 86
Memory functions
Seats, steering wheel and mirrors