navigation system MERCEDES-BENZ G-Class 2012 W463 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2012, Model line: G-Class, Model: MERCEDES-BENZ G-Class 2012 W463Pages: 284, PDF Size: 9.4 MB
Page 12 of 284
System ..........................................
198
Vehicle remote unlocking .............. 202
Mechanical key
Function/notes ................................
61
Loss ................................................. 64
Memory card
Operating (on-board computer) ..... 157
see separate operating instructions
Memory function ................................. 85
Menu (on-board computer) Audio ............................................. 156
DVD ............................................... 157
Message memory .......................... 165
Navigation ..................................... 158
Overview of menus ........................ 155
Resetting to factory settings .......... 158
Settings ......................................... 158
Standard display ............................ 156
Telephone ...................................... 163
Trip computer ................................ 162
Messages
see Display messages
Mirrors
Sun visor ........................................ 194
Mobile phone
Menu (on-board computer) ............ 163
MP3
Operating (on-board computer) ..... 157
see separate operating instructions
Multicontour seat ................................ 79
Multifunction display ........................ 154
Multifunction steering wheel Operating the on-board computer . 153
Overview .......................................... 27N
Navigation On-board computer ....................... 158
see separate operating instructions
NECK-PRO head restraints
Operation ......................................... 40
Resetting after being triggered ........ 41
Notes on breaking-in a new
vehicle ................................................ 114 O
Occupant safety Children in the vehicle .....................47
System overview .............................. 32
Octane number (fuel) ........................274
Odometer ........................................... 156
Off-road 4MATIC .......................................... 141
Differential locks ............................ 148
Off-road ABS
.................................... 54
Off-road driving
Checklist ........................................ 136
Driving on sand .............................. 137
Important safety notes .................. 134
Off-road fording ................................. 133
Oil see Engine oil
On-board computer
Audio menu ................................... 156
Convenience submenu .................. 161
Display messages ..........................165
Factory settings ............................. 158
Important safety notes .................. 152
Message memory menu ................. 165
Navigation menu ............................ 158
Operation ....................................... 153
Overview of menus ........................ 155
Settings menu ............................... 158
Standard display menu ..................156
Status bar ...................................... 159
Telephone menu ............................ 163
Trip computer menu ...................... 162
Vehicle submenu ........................... 161
Video DVD operation ..................... 157
On-board computer language ..........159
On-board diagnostics interface .......... 20
Operating safety Important safety notes .................... 19
On-board diagnostics interface ........ 20
Operating system
see On-board computer
Outside temperature
Calling up (on-board computer) ..... 156
Display ........................................... 153
Overhead control panel
Overview .......................................... 2910
Index
Page 160 of 284
X
Press the & or * button to select a
scene. Navigation system menu
Displaying navigation instructions In the
Navigation menu: the instructions
from the navigation system appear in the
multifunction display. For more information,
see the separate operating instructions.
X Switch on COMAND (see the separate
operating instructions).
X Press the V or U button on the
steering wheel to select the Navigation
menu.
Route guidance inactive The direction of travel appears in the
multifunction display. If the name of the
street is part of the navigation system data,
this will also be displayed.
Route guidance active
The multifunction display shows navigation
instructions, for example: Settings menu
Introduction In the
Settings menu, you have the following
options:
R restoring the factory settings
R changing the instrument cluster settings
R changing the light settings
R changing the vehicle settings
R changing the convenience settings
Resetting to factory settings For safety reasons, not all functions are reset:
the Headlamp mode function in the
Lighting
submenu
is only reset if the vehicle
is stationary. 158
Menus and submenus
On-board computer and displays
Page 183 of 284
Problem Possible causes/consequences and
M Solutions!
The
yellow
ABS warning
lamp is lit while the
engine is running. G
Risk of accident
ABS (Anti-lock Brake System) is deactivated due to a malfunction.
Therefore, BAS
(Brake Assist), ESP ®
(Electronic Stability Program),
EBD (electronic brake force distribution) and 4ETS are also
deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X Observe the additional display messages in the multifunction
display.
X Drive on carefully.
X Visit a qualified specialist workshop.
If the ABS control unit is defective, other systems, such as the
navigation system or the automatic transmission, may also be
unavailable. !
The
yellow
ABS warning
lamp is lit while the
engine is running. G
Risk of accident
The on-board voltage is too low. ABS has been deactivated due to
undervoltage.
ESP ®
, BAS, EBD and 4ETS are therefore also deactivated, for
example.
The brake
system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X Observe the additional display messages in the multifunction
display.
X Drive on carefully.
X Switch off consumers that are not required, e.g. the rear window
defroster or interior lighting.
ABS will be available again as soon as the vehicle's on-board
electrical system voltage increases.
If the warning lamp is still on:
X Have the battery and alternator checked at a qualified specialist
workshop. !
The
yellow
ABS warning
lamp is lit while the
engine is running. You have engaged the differential locks. ABS, BAS, EBD, ESP
®
and
4ETS are deactivated.
X Disengage the differential locks.
Subsequently, ABS, BAS, EBD, ESP ®
and 4ETS are reactivated. Warning and indicator lamps in the instrument cluster
181
On-board computer and displays Z
Page 202 of 284
established, then the mbrace system could
not initiate an emergency call (e.g. the
relevant cellular phone network is not
available).
The message
Call Failed appears in the
multifunction display for approximately
10 seconds.
Should this occur, assistance must be
summoned by other means.
Making an emergency call X
To initiate an emergency call
manually: press cover : briefly to open
it.
X Press SOS button ; briefly.
The indicator lamp in SOS button ;
flashes until the emergency call is
concluded.
X Wait for the voice connection with the
Response Center.
X After the emergency call is ended, close
cover :. G
WARNING
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle,
vehicle in a dangerous road location), please
do not wait for voice contact after you have
pressed the SOS button. Carefully leave the
vehicle and move to a safe location. The
Response Center will automatically contact
local emergency officials with the vehicle's
approximate location if they receive an
automatic SOS
signal and cannot make voice
contact with the vehicle occupants. Roadside Assistance button X
Open
the stowage compartment under the
armrest (Y page 189). X
Press and hold Roadside Assistance
button : for more than two seconds.
A call to a Mercedes-Benz Roadside
Assistance Representative is initiated. The
indicator lamp in Roadside Assistance
button : flashes while the call is active.
The Connecting call message appears
on the multifunction display and the
COMAND system is muted.
If a connection can be established, the Call
Connected message appears on the
multifunction display.
If a mobile phone network is available and
there is
sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
R current location of the vehicle
R vehicle identification number
R vehicle model
R vehicle color
i The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu by pressing the NAVI
button on COMAND during the call. Voice
output is not available.
A voice connection is established between
the Mercedes-Benz Roadside Assistance
Representative and the vehicle occupants.
X Describe the type of assistance needed.200
Features
Stowing and features
Page 203 of 284
The Mercedes-Benz Roadside Assistance
Representative either sends a qualified
Mercedes-Benz technician or makes
arrangements for your vehicle to be
transported to the nearest authorized
Mercedes-Benz Center. You may be charged
for services such as repair work and/or
towing. Further details are available in your
mbrace manual.
i
If the indicator lamp in Roadside
Assistance button : flashes continuously
and no voice connection to the Response
Center has been established, then the
mbrace system has failed to initiate a
Roadside Assistance call (e.g. the
corresponding mobile
phone network is not
available). The Call Failed message
appears on the multifunction display.
X To end a call: press
the ~ button on the
multifunction steering wheel.
or
X Press the corresponding button for ending
a phone call on COMAND.
i Sign and Drive services 15
: services such
as jump-starting your vehicle, delivering a
few gallons of fuel if you run out and
mounting your spare if you have a flat tire
are provided free-of-charge.
MB Info call button X
Open the stowage compartment under the
armrest (Y page 189). X
Press and hold MB Info call button : for
more than two seconds.
A call to the Response Center is initiated.
The indicator lamp in MB Info call
button : flashes while the connection is
being established. The Connecting call
message appears on the multifunction
display and
the COMAND system is muted.
If a connection can be established, the Call
Connected message appears on the
multifunction display.
If a mobile phone network is available and
there is
sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
R current location of the vehicle
R vehicle identification number
R vehicle model
R vehicle color
i The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu during the call by pressing
the NAVI button on COMAND.
A voice connection between the Response
Center and the vehicle occupants is
established. You can obtain information on
how to operate your vehicle's systems, on the
location of the nearest authorized Mercedes-
Benz Center, and on further products and
services offered by Mercedes-Benz USA.
15 USA only. Features
201Stowing and features Z
Page 204 of 284
Further details on the mbrace system can be
found
at http://www.mbusa.com 16
.
Log in
under "Owners Online".
i If the indicator lamp in MB Info call
button : flashes continuously and no
voice connection to the Response Center
has been established, then the mbrace
system has failed to initiate an MB Info call
(e.g. because the corresponding mobile
phone network is not available). The Call
Failed message appears on the
multifunction display.
X To end a call: press
the ~ button on the
multifunction steering wheel.
or
X Press the corresponding button for ending
a phone call on COMAND.
Call priority When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an
emergency call has the highest priority and
takes precedence over all other active calls.
The indicator lamp of the respective button
flashes
until
the call is ended. An emergency
call can only be terminated by the Response
Center. All other calls can be ended by
pressing the ~ button on the
multifunction steering wheel or the
corresponding button for ending a telephone
call on COMAND.
i When an mbrace call has been initiated,
COMAND is muted. The mobile phone is no
longer connected to COMAND. However, if
you want to use your mobile phone, we
recommend that you do this only when the
vehicle is stationary and in a safe location.
Downloading destinations in COMAND i
Information on the components and
operating principles of the COMAND system can be found in the separate
COMAND operating instructions.
Destination Download gives you access to a
database with over ten million points of
interest (POIs)
which can be downloaded onto
the navigation system of your vehicle. If you
know the destination, you can download the
address or obtain the location of points of
interest (POIs) or important destinations in
the surrounding area.
You are prompted to confirm route guidance
to the address entered.
X Select Yes using the = or ; button
on COMAND.
X Press 9 on COMAND to confirm.
The system calculates the route and
subsequently starts the route guidance with
the address entered.
i If you
select No, the address can be stored
in the address book.
i The Destination Download function is
available if the corresponding mobile
phone network is available and data
transfer is possible.
Search & Send "Search & Send" is a destination entry
service. You can find further information on
"Search & Send" in the separate COMAND
operating instructions.
Vehicle remote opening
If you have unintentionally locked your
vehicle (e.g. the SmartKey is inside the
vehicle) and a replacement key is not
available:
X
Contact the following service hotlines:
16 USA only.202
Features
Stowing and features