navigation MERCEDES-BENZ G-Class 2015 W463 Owner's Manual

Roadside Assistance butto
n ..........261
Self-test ......................................... 259
Speed alert ................................... .265
System .......................................... 259
Triggering the vehicle alarm ........... 266
Vehicle remote malfunction diag-
nosis .............................................. 264
Vehicle remote unlocking .............. 263
Mechanical key
Function/notes ................................ 69
General notes .................................. 69
Removing ......................................... 70
Memory card (audio) ......................... 203
Memory function ................................. 95
Message memory (on-board com-
puter) ................................................. .212
Messages
see Display messages
Mirrors
Sun visor ........................................ 255
see Exterior mirrors
see Rear-view mirror
Mobile phone
Menu (on-board computer) ............ 204
Mounting wheels
Mounting a new wheel ................... 330
Raising the vehicle ......................... 328
Removing a wheel .......................... 330
Securing the vehicle against roll-
ing away ........................................ 328
MP3
Operation ....................................... 203
see separate operating instructions
Multifunction display
Function/notes ............................ .199
Permanent display ......................... 207
Multifunction steering wheel
Back button ................................... 199
Operating the on-board computer .. 198
Overview .......................................... 33 N
Navigation Menu (on-board computer) ............ 201
see separate operating instructions
NECK-PRO head restraints
Operation ......................................... 51 Resetting triggered .......................... 51
NECK-PRO luxury head restraints
Important safety notes .................... 51
Operation ......................................... 51
Resetting when triggered ................. 52
Notes on breaking-in a new vehi-
cle ....................................................... 132 O
Occupant safety Automatic measures after an acci-
dent ................................................. 52
BabySmart™ air bag deactivation
system ............................................. 56
Children in the vehicle ..................... 52
Important safety notes .................... 41
Pets in the vehicle ........................... 61
Off-road
Differential locks ............................ 188
Off-road ABS ................................... .62
Off-road driving
Checklist ........................................1 59
Driving on sand .............................. 160
Important safety notes .................. 158
Traveling uphill ............................... 161
Off-road fording ................................. 156
Off-road system
Permanent all-wheel drive ............. 181
Oil
see Engine oil
On-board computer
AMG menu ..................................... 209
Assistance menu ........................... 205
Audio menu ................................... 203
Convenience submenu .................. 208
Display messages .......................... 211
DISTRONIC PLUS ........................... 174
Factory settings submenu ............. 209
Important safety notes .................. 196
Instrument cluster submenu .......... 206
Lighting submenu .......................... 207
Menu overview .............................. 200
Message memory .......................... 212
Navigation menu ............................ 201
Operation ....................................... 198
RACETIMER ................................... 210
Service menu ................................. 206 12
Index

Switching on/of
f........................... 101
Rear lamps
see Lights
Rear seat bench
Folding into an upright position ..... 252
Rear view camera
Function/note s............................. 185
Rear view camera (cleaning
instructions) ...................................... 284
Rear window defroster
Problem (malfunction) ................... 127
Switching on/of f........................... 126
Rear window wiper
Switching on/of f........................... 115
Rear-view mirror
Dipping (automatic) ......................... 94
Refrigerant (air-conditioning sys-
tem)
Important safety notes .................. 341
Refueling
Fuel gaug e..................................... 197
Important safety notes .................. 147
Refueling process .......................... 148
see Fuel
Remote control
Programming (garage door
opener) .......................................... 267
Replacing bulbs
Important safety notes .................. 108
Overview of bulb types .................. 109
Reporting safety defects .................... 25
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message ............................ 224
Warning lamp ................................. 243
see Fuel
Residual heat
Switching on/of f........................... 127
Restraint system
Display message ............................ 216
Introduction ..................................... 40
Warning lamp ................................. 242
Warning lamp (function) ................... 41
Reversing lamps (display mes-
sage) ................................................... 220
Roadside Assistance (breakdown) .... 22Roof lining and carpets (cleaning
guidelines)
......................................... 287
Route (navigation)
see Route guidance (navigation)
Route guidance (navigation) ............ 201 S
Safety Child restraint systems .................... 54
Children in the vehicle ..................... 52
Safety system
see Driving safety systems
Seat backrest
Folding back .................................. 251
Seat belts
Adjusting the height ......................... 44
center rear-compartment sea t......... 45
Cleaning ......................................... 287
Correct usage .................................. 44
Fastening ......................................... 44
Important safety guidelines ............. 43
Introduction ..................................... 42
Releasing ......................................... 46
Warning lamp ................................. 235
Warning lamp (function) ................... 46
Seat heating
Indicator lamp (malfunction) ............ 89
Seat ventilation
Indicator lamp (malfunction) ............ 90
Seats
Adjusting (electrically) ..................... 86
Adjusting the 4-way lumbar sup-
port .................................................. 88
Adjusting the head restraint ............ 86
Cleaning the cover ......................... 286
Correct driver's seat position ........... 84
Important safety notes .................... 85
Overview .......................................... 85
Storing settings (memory func-
tion) ................................................. 95
Switching seat heating on/of f......... 89
Switching seat ventilation on/of f.... 90
Sensors (cleaning instructions) ....... 284
Service interval display
Displaying a service message (on-board computer) ............................ 280 14
Index

B
Time
C Transfer case position (Y page 186)
X To show menu bar ?:press the =
or ; button on the steering wheel.
Menu bar ?disappears after a few seconds.
Text field =shows the selected menu or
submenu as well as display messages.
For further information on displaying the
transmission position, see (Y page 140).
i You can set the time using COMAND; see
the separate operating instructions.
The following messages may appear in the
multifunction display:
Z Gearshift recommendation (AMG
vehicles) (Y page 145)
¯ Cruise control (Y page 162)
LIM
LIM SPEEDTRONIC (Y
page 166)
¤ ECO start/stop function (AMG vehi-
cles) (Y page 135)
LOW LOW
RANGE RANGE LOW RANGE off-road gear
(Y
page 186)
ë HOLD function (Y page 180)Menus and submenus
Menu overview
Press the =or; button on the steer-
ing wheel to call up the menu bar and select a
menu.
Operating the on-board computer
(Y page 198).
Depending on the equipment installed in the
vehicle, you can call up the following menus:
R Trip Trip menu (Y page 200)
R Navi
Navi menu (navigation instructions)
(Y page 201)
R Audio
Audio menu (Y page 203)
R Tel
Tel menu (telephone) (Y page 204)
R DriveAssist
DriveAssist menu (assistance)
(Y page 205)
R Serv
Serv menu (Y page 206) R
Sett Sett menu (settings) (Y page 206)
R AMG AMG menu in AMG vehicles (Y page 209) Trip menu
Standard display X
Press and hold the %button on the
steering wheel until the Trip
Tripmenu with
trip odometer :and odometer ;is
shown.
Trip computer "From start" or "From
reset" Example: trip computer "From Start"
:
Distance
; Time
= Average speed
? Average fuel consumption
X Press the =or; button on the steer-
ing wheel to select the Trip Tripmenu.
X Press 9or: to select From Start
From Start
or From Reset
From Reset.
The values in the From Start
From Startsubmenu are
calculated from the start of a journey whilst
the values in the From Reset From Resetsubmenu are
calculated from the last time the submenu
was reset (Y page 201).
The From Start From Start trip computer is automati-
cally reset when: 200
Menus and submenusOn-board computer and displays

R
the ignition has been switched off for more
than four hours.
R 999 hours have been exceeded.
R 9,999 miles have been exceeded.
The From Reset
From Reset trip computer is automati-
cally reset if the value exceeds 9999 hour sor
99,999 miles.
Range :
Approximate range
X Press the =or; button on the steer-
ing wheel to select the Trip Tripmenu.
X Press 9or: to select the approxi-
mate range.
The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only a small amount of
fuel left in the fuel tank, the display shows a
vehicle being refueled Cinstead of the
range.
Digital speedometer :
Digital speedometer
X Press the =or; button on the steer-
ing wheel to select the Trip Tripmenu.
X Press the 9or: button to select the
digital speedometer. Resetting values Example: resetting the trip computer "From Start"
X Press the =or; button on the steer-
ing wheel to select the Trip
Tripmenu.
X Press the 9or: button to select the
function that you wish to reset.
X Press the abutton.
X Press the :button to select Yes
Yesand
press the abutton to confirm.
You can reset the values of the following func-
tions:
R Trip odometer
R "From Start" trip computer
R "From Reset" trip computer Navigation system menu
Displaying navigation instructions In the
Navi
Navimenu, the multifunction display
shows navigation instructions.
For more information, see the separate oper-
ating instructions.
X Switch on COMAND (see the separate
operating instructions).
X Press the =or; button on the steer-
ing wheel to select the Navi Navimenu. Menus and submenus
201On-board computer and displays Z

Maintenance menu
Example: service menu
In the Service
Service menu, you have the following
options:
R Calling up display messages
(Y page 212)
R Checking the tire pressure electronically
(Y page 314)
R Calling up the service due date
(Y page 280) Settings menu
Introduction Example: settings menu
In the Sett. Sett. menu, you have the following
options:
R Changing the instrument cluster settings
(Y page 206)
R Changing the light settings (Y page 207)
R Changing the vehicle settings
(Y page 208)
R Changing the convenience settings
(Y page 208)
R Restoring the factory settings
(Y page 209) Instrument cluster Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X Press the =or; button on the steer-
ing wheel to select the Sett. Sett.menu.
X Press the :or9 button to select the
Inst. Cluster
Inst. Cluster submenu.
X Press ato confirm.
X Press the :or9 button to select the
Display Unit Speed-/Odometer:
Display Unit Speed-/Odometer: func-
tion.
You will see the selected setting: km kmor
miles miles.
X Press the abutton to save the setting.
The selected unit of measurement for dis-
tance applies to: R Vehicles with instrument cluster in kilo-
meters: digital speedometer in the Trip Trip
menu
R the odometer and the trip odometer
R the trip computer
R the current consumption and the range
R the navigation instructions in the Navi
Navi
menu
R cruise control
R SPEEDTRONIC
R DISTRONIC PLUS
R the service interval display 206
Menus and submenusOn-board computer and displays

Problem
Possible causes/consequences and
M
MSolutions !
The yellow ABS warning
lamp is lit while the
engine is running. ABS (Anti-lock Braking System) is deactivated due to a malfunc-
tion. BAS (Brake Assist), ESP ®
(Electronic Stability Program), the
HOLD function, hill start assist, the adaptive brake lights and
ESP ®
trailer stabilization, for example, are therefore also deacti-
vated.
G WARNING
The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-ted. The braking distance in an emergency braking situation can
increase.
If ESP ®
is not operational, ESP ®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X Observe the additional display messages in the multifunction
display.
X Drive on carefully.
X Visit a qualified specialist workshop.
If the ABS control unit is faulty, there is also a possibility that other
systems, such as the navigation system or the automatic trans-
mission, will not be available. Warning and indicator lamps in the instrument cluster
237On-board computer and displays Z

X
To initiate an emergency call manually:
press cover :briefly to open.
X Press SOS button ;briefly.
The indicator lamp in SOS button ;
flashes until the emergency call is conclu-
ded.
X Wait for the voice connection with the
Response Center.
X After the emergency call, close cover :.
Roadside Assistance button X
Open the stowage compartment under the
armrest (Y page 250).
X Press Roadside Assistance button :for
more than two seconds.
A call to a Mercedes-Benz Roadside Assis-
tance Representative is initiated. Indicator
lamp ;in Roadside Assistance button :
flashes while the call is active. The Con‐
Con‐
necting Call necting Call message appears in the
multifunction display and COMAND is
muted.
If a connection can be made, the Call Con‐ Call Con‐
nected
nected message appears in the multifunction
display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response Cen-
ter, for example:
R current location of the vehicle
R vehicle identification number R
vehicle model
R vehicle color
i The COMAND display shows that an
mbrace call is active. You can change to the navigation menu by pressing the NAVI but-
ton on COMAND during the call. Voice out- put is not available.
A voice connection is established between
the Mercedes-Benz Roadside Assistance
Representative and the vehicle occupants.
The Mercedes-Benz Roadside Assistance
Representative either sends a qualified
Mercedes-Benz technician or makes arrange-
ments for your vehicle to be transported to
the nearest authorized Mercedes-Benz Cen-
ter. You may be charged for services such as repair work and/or towing. Further details
are available in your mbrace manual.
X Describe the type of assistance needed.
i If the indicator lamp in Roadside Assis-
tance button :is flashing continuously
and no voice connection with the Response center has been established, then the
mbrace system has not been able to initiate
a Roadside Assistance call (e.g. the rele-
vant mobile phone network is not availa-
ble). The Call
Call Failed Failed message appears in
the multifunction display.
X To end a call: press the~button on the
multifunction steering wheel.
or
X Press the corresponding COMAND button
to end a phone call.
i Sign and drive services 1
: you are not
charged for services such as jump-starting,
providing a few gallons of fuel for a fuel tank that has been run dry or changing a faulty
tire with the vehicle's own spare wheel.
1 USA only. Features
261Stowage an d features Z

MB Info call button
X
Open the stowage compartment under the
armrest (Y page 250).
X Press Roadside Assistance button :for
more than two seconds.
A call to a Mercedes-Benz Roadside Assis-
tance Representative is initiated. Indicator
lamp ;in Roadside Assistance button :
flashes while the call is active. The Con‐ Con‐
necting Call necting Call message appears in the
multifunction display and COMAND is
muted.
If a connection can be made, the Call Con‐ Call Con‐
nected
nected message appears in the multifunction
display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response Cen-
ter, for example:
R current location of the vehicle
R vehicle identification number
R vehicle model
R vehicle color
i The COMAND display shows that an
mbrace call is active. You can change to the navigation menu by pressing the NAVI but-
ton on COMAND during the call. Voice out- put is not available.
A voice connection between the Response
Center and the vehicle occupants is estab-
lished. You can obtain information on how to operate your vehicle's systems, on the loca- tion of the nearest authorized Mercedes-Benz
Center, and on further products and services
offered by Mercedes-Benz USA.
You can find further information on the
mbrace system at http://
www.mbusa.com 2
Log in under "Owners
Online".
i If the indicator lamp in MB Info call but-
ton :is flashing continuously and no voice
connection with the Response center has
been established, then the mbrace system
has not been able to initiate an MB Info call (e.g. the relevant mobile phone network is
not available). The Call Failed
Call Failed message
appears in the multifunction display.
X To end a call: press the~button on the
multifunction steering wheel.
or
X Press the corresponding COMAND button
to end a phone call.
Call priority When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an emer-
gency call will take priority and override all
other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency call can only be terminated by the Response
Center. All other calls can be ended by press-
ing the ~button on the multifunction
steering wheel or the corresponding
COMAND button for ending a telephone call.
i When an mbrace call is initiated,
COMAND is muted. The mobile phone is no
longer connected to COMAND.
However, if you want to use your mobile
phone, do so only when the vehicle is sta-
tionary and in a safe location.
2 USA only. 262
FeaturesStowage and features

Downloading destinations in COMAND
Destination Download gives you access to a
database with over ten million points of inter- est (POIs) which can be downloaded onto the navigation system of your vehicle. If you know
the destination, you can download the
address or obtain the location of points of
interest (POIs) or important destinations in
the surrounding area.
You are prompted to confirm route guidance
to the address entered.
i For information on the components and
operating principles of COMAND, see the
separate operating instructions.
X Select Yes
Yes using the =or; buttons
on COMAND.
X Confirm using the 9button on COMAND.
The system calculates the route and subse-
quently starts the route guidance with the
address entered.
i If you select
No
No, the address can be stored
in the address book.
i The Destination Download function is
available if the corresponding mobile
phone network is available and data trans- fer is possible.
Search & Send "Search & Send" is a destination entry ser-
vice. For more information on "Search &
Send", see the separate operating instruc-
tions.
Vehicle remote opening If you have unintentionally locked your vehi-
cle (e.g. the SmartKey is inside the vehicle)
and a replacement key is not available:
X Contact the following service hotlines: R
USA: Response Center at
1-888-990-9007
R Canada: Customer Service at
1-888-923-8367
You will be asked for your password.
X Return to your vehicle at the time arranged
with the Response Center.
X Press the release button on the door handle
of the rear door for at least 20 seconds until
the indicator lamp in the SOS button
(Y page 260) flashes.
The Connecting Call
Connecting Call message appears
on the multifunction display.
Alternatively, the vehicle can be opened via
the Internet in the "Owner's Online" section
using your identification number and pass-
word 3
.
i Vehicle remote opening is only possible if
the corresponding mobile phone network is accessible.
The SOS button flashes and the Connect‐ Connect‐
ing Call
ing Call message appears in the multi-
function display to confirm that the com-
mand for vehicle remote unlocking has
been received.
If the lock cylinder on the rear door is
pressed for longer than 20 seconds before
receiving authorization for remote unlock-
ing from the Response center, you must
wait 15 minutes before you can press the
lock cylinder on the rear door again.
Vehicle remote closing The remote closing feature can be used when
you have forgotten to lock the vehicle and you
are no longer nearby. The vehicle can then be locked by the Mercedes-Benz Customer
Assistance Center.
The vehicle can be remotely locked within
four days of the ignition being turned off.
X Contact the following service hotlines:
3 USA only. Features
263Stowage and fea tures Z

X
Press OK
OKto confirm the message.
The voice connection with the Customer
Assistance center is terminated.
The Vehicle Diagnosis: Transfer‐ Vehicle Diagnosis: Transfer‐
ring data...
ring data... message appears.
The vehicle data is sent to the Customer
Assistance center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted at a later time by another means, e.g. by e-
mail or phone.
Further functions of the vehicle remote mal-
function diagnosis include, for example:
R transfer of service data to the Customer
Assistance center. If a service is overdue,
the COMAND display shows a message
about various special offers at your work-
shop.
R monthly status information e-mail on oil
level, air pressure, maintenance, brakes,
etc. If applicable, you will receive informa-
tion on special offers in the e-mail.
USA only: this information can also be
called up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
(Y page 26).
Information on Roadside Assistance
(Y page 22).
Downloading routes Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet. Each route can include up to 20 way points. When a route has
been received by the navigation system, the 'Route name' has been saved to mem‐
'Route name' has been saved to mem‐
ory ory card.
card. Do
Doyou
you want
want to
tostart
start route
route
guidance?
guidance? message appears on the
COMAND display. The route is saved to the
SD memory card.
X To start route guidance: selectYes
Yes.
An overview of the route is shown in the
display.
i If you select
No No, the saved route can be
called up later in the navigation menu.
X Select Start
Start.
Route guidance is started.
i Downloaded and saved data can be called
up again in COMAND. Further information
can be found in the "COMAND", "Online
and Internet services" and "Download des-
tination/route" sections.
Speed alert You can define the upper speed limit, which
must not be exceeded by the vehicle. If this
selected speed is exceeded by the vehicle, a
message will be sent to the Customer Assis-
tance center. The Customer Assistance cen-
ter then forwards this information to you. You
can select the way in which you receive this
information beforehand. Possible options
include text message, e-mail or an automated call.
The data which is sent to the Customer Assis-tance center contains the following informa-
tion:
R the location where the speed limit was
exceeded
R the time at which the speed limit was
exceeded
R the selected speed limit which was excee-
ded
Geo fencing Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select Features
265Stowage and features Z