change language MERCEDES-BENZ G55AMG 2008 W463 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: G55AMG, Model: MERCEDES-BENZ G55AMG 2008 W463Pages: 457, PDF Size: 10.33 MB
Page 134 of 457
133
Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1. The control system
enables you to
call up information about your vehicle
change vehicle settings
For example, you can use the control
system to find out when your vehicle is
next due for maintenance service, to set
the language for messages in the instru-
ment cluster display, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1 Trip odometer
2 Main odometer
3 Transfer case indicator
4 Current gear selector lever
position/gear range
5 Status indicator (clock)
6 Status indicator (outside temperature
or digital speedometer)
For more information on menus displayed
in the multifunction display, see “Menus”
(
page 136).
Warning!G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features thro ugh the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
W463.boo Seite 133 Montag, 19 . November 2007 8:41 08
Page 149 of 457
148 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus.
Detailed instructions on making individual
settings can be found on the following
pages.
Instrument clusterLightingVehicleConvenience
(page 149)(page 151)(page 154)(page 156)
Selecting speedometer
display modeSetting daytime
running lamp mode
(USA only)Selecting audio search
functionActivating
easy-entry/exit feature
Selecting languageSetting locator lightingSetting automatic
locking
Selecting display
(digital speedometer or
outside temperature)
for status indicatorSetting night security
illumination
Setting interior lighting
delayed shut-off
W463.boo Seite 148 Montag, 19. November 2007 8:41 08
Page 150 of 457
149
Controls in detail
Control system
Instrument cluster submenu
Access the
Inst. cluster submenu via
the
Settings menu. Use the Inst. clus-
ter
submenu to change the instrument
cluster display settings.
The following functions are available: Selecting speedometer display mode
Move the selection marker with
button
æ orç to the
Inst.
cluster
submenu.
Press button j ork repeatedly
until the message
Disp.Unit
Speed-/odom.
appears in the multi-
function display.
The selection marker is on the current
setting.
Press button æ orç to set
speedometer unit to
km or miles. Selecting language
Move the selection marker with
button
æ orç to the
Inst.
cluster
submenu.
Press button j ork repeatedly
until the message
Language appears in
the multifunction display.
The selection marker is on the current
setting.
FunctionPage
Selecting speedometer display
mode149
Selecting language149
Selecting display (digital speed-
ometer or outside temperature)
for status indicator150
W463.boo Seite 149 Montag, 19 . November 2007 8:41 08