oil reset MERCEDES-BENZ GL-Class 2013 X166 Owner's Manual

Selector lever
Cleaning ......................................... 378
Sensors (cleaning instructions) .......375
Service menu (on-board computer) .277
Service products Brake fluid ..................................... 444
Coolant (engine) ............................ 445
DEF special additive s..................... 442
Engine oil ....................................... 443
Fuel ................................................ 440
Important safety notes ..................439
Washer fluid .................................. .446
Settings
Factory (on-board computer) .........282
On-board computer .......................278
Setting the air distribution ...............154
Setting the airflow ............................154
SETUP (on-board computer) .............283
Side impact air bag .............................47
Side marker lamp (display
message) ............................................ 301
Side windows Cleaning ......................................... 374
Convenience closing feature ............93
Convenience opening feature ..........93
Hinged sid ewindows ....................... 93
Important safety information ...........91
Opening/closing .............................. 92
Overview .......................................... 91
Problem (malfunction) .....................96
Resetting ......................................... 95
Sliding sunroof
Important safety notes ....................96
Opening/closing .............................. 97
Problem (malfunction) ...................100
Resetting ......................................... 98
see Panorama roof with power
tilt/sliding panel
SmartKey
Changing the battery .......................81
Changing the programming .............80
Checking the battery .......................81
Convenience closing feature ............94
Convenience opening feature ..........93
Display message ............................ 319
Door central locking/unlocking .......79
Important safety notes ....................78
Loss ................................................. 83Mechanical key
................................ 80
Overview .......................................... 78
Positions (ignition lock) .................163
Problem (malfunction) .....................83
Starting the engine ........................165
Snow chains
Information .................................... 403
Snow drive program ....................... 249
Sockets
Center console .............................. 349
General notes ................................ 348
Luggage compartment ...................349
Rea rcompartmen t......................... 349
Spare wheel
see Emergency spare wheel
Specialist workshop ............................ 28
Special seat bel tretractor .................. 62
Speed ,controlling
see Cruise control
Speedometer
Digital ............................................ 271
In the Instrument cluster .........33, 267
Segments ...................................... 268
Selecting the unit of measurement 278
see Instrument cluster
SRS (Supplemental Restraint
System)
Display message ............................ 295
Introduction ..................................... 43
Warning lamp ................................. 328
Warning lamp (function) ................... 43
Standing lamps
Display message ............................ 301
Switching on/off ........................... 127
Starting (engine) ................................ 165
STEE RCONTROL .................................. 75
Steering (display message) ..............318
Steering wheel Adjusting (electrically). ..................116
Adjusting (manually). .....................115
Button overview ............................... 35
Buttons (on-board computer) ......... 268
Cleaning ......................................... 378
Important safety notes ..................115
Paddle shifters ............................... 173
Steering wheel heating ..................116
Storing settings (memory function) 121 Index
17

X
Press 0004or0003 to select the Auto. Mirror Folding function.
If the Auto. Mirror Folding function is
activated, the vehicle's exterior mirror is
displayed in red in the multifunction
display.
X Press the 000Bbutton to save the setting. 0002
To fold the exterior mirrors in or out
If you have switched the Auto. MirrorFolding on and you fold the exterior mirrors
in using button 0002, they will not fold out
automatically (Y page 119).
You can then only fold out the exterior mirrors
using button 0002.
Restoring the factory settings X
Press the 0002or0005 button on the
steering wheel to select the Sett. menu.
X Press the 0004or0003 button to select the
Factory Setting submenu.
X Press 000Bto confirm.
The Reset All Settings? message
appears.
X Press the 0004or0003 button to select
No or
Yes .
X Press 000Bto confirm the selection.
If you select Yes , the multifunction display
shows a confirmation message.
For safety reasons, the Daytime RunningLights function in the
Lights submenu is
only reset if the vehicle is stationary. ON&OFFROAD menu
Multifunction display (example)
X
Press the 0002or0005 button on the
steering wheel to select the ON&OFFROAD menu.
You can set the following curren tsettings to
appear in the ON&OFFROAD menu:
R On-road program (Y page 247)
R Off-road program (Y page 252) AMG menu in AMG vehicles
AMG displays 0002
Digital speedometer
0003 Gear indicator
0021 Upshift indicator
0020 Engine oil temperature
001E Coolant temperature
001F Status indicator (indicator not available in
USA/Canada)
X Press 0002or0005 on the steering wheel
to select the AMG menu.
Upshift indicator UP 0021
indicates that the
engine has reached the overrevving range
when in the manual gearshift program.
Upshift indicator UP 0021
fades out other
messages until you have shifted up.
If the engine oil temperature is below 176 ‡
(80 †) the oil temperature is shown in blue. 282
Menus and submenusOn-board computer and displays

Hiding
aservice message X
Press the 0007or000B button on the
steering wheel.
Displaying service messages X
Switch on the ignition.
X Press the 0002or0005 button on the
steering wheel to selec tthe Serv. menu.
X Press the 0003or0004 button to select the
ASSYST PLUS submenu and confirm by
pressing the 000Bbutton.
The service due date appears in the
multifunction display.
Information about Service Resetting the ASSYST PLUS service
interval display
!
If the ASSYST PLUS service interval
display has been inadvertently reset, this
setting can be corrected at a qualified
specialist workshop.
Have service work carried out as described
in the Maintenance Booklet. This may
otherwise lead to increased wear and
damage to the major assemblies or the
vehicle.
Aq ualified specialist workshop, e.g. an
authorized Mercedes-Ben zCenter, will reset
the ASSYST PLUS service interval display
after the service work has been carried out.
You can also obtain further information on
maintenance work, for example.
Special service requirements
The specified maintenance interval takes only
the normal operation of the vehicle into
account. Under arduous operating conditions
or increased load on the vehicle,
maintenance work must be carried out more
frequently, for example:
R regular city driving with frequent
intermediate stops
R if the vehicle is primarily used to travel
short distances R
use in mountainous terrain or on poor road
surfaces
R if the engine is often left idling for long
periods
Under these or similar conditions, have, for
example, the air filter, engine oil and oil filter
replaced or changed more frequently. Under
arduous operating conditions, the tires must
be checked more often. Further information
can be obtained at a qualified specialist
workshop, e.g. an authorized Mercedes-Benz
Center.
Driving abroad
An extensive Mercedes-Benz Service network
is also available in other countries. You can
obtain further information from any
authorized Mercedes-BenzC enter. Care
General notes
H
Environmental note
Dispose of empty packaging and cleaning
cloths in an environmentally responsible
manner.
! For cleaning your vehicle, do not use any
of the following:
R dry, rough or hard cloths
R abrasive cleaning agents
R solvents
R cleaning agents containing solvents
Do not scrub.
Do not touch the surfaces or protective
films with hard objects, e.g. a ring or ice
scraper. You could otherwise scratch or
damage the surfaces and protective film.
! Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you Care
371Maintenance and care Z