ECU MERCEDES-BENZ M-Class 2001 W163 Comand Manual

12
IntroductionAudio Telephone Navigation Index
S y s te m s e ttin g s
Pop-up screen message: DISPLAY IS TOO HOT...
If the message “DISPLAY IS TOO HOT ...” appears, the
display is too hot. For protection the light will be shut
off. When the display has cooled down the light will be
automatically switched on.Anti-theft system
If the power supply to the MCS has been interrupted,
“PLEASE ENTER SECURITY CODE” will appear on the
display when it is next switched on. The MCS will only
work after the five digit code has been entered using the
number keypad.
P68.20-2110-27
P68.20-2110-27
Introductions

13
IntroductionAudio Telephone Navigation Index
S y s te m s e ttin g s
The code number is printed on the RADIO CODE CARD
in the owner’s portfolio. Keep the RADIO CODE CARD in
a safe place.
Entering the code number
Switch the MCS on, see page 10. “PLEASE ENTER SECU-
RITY CODE” will appear on the display. Use the number
keys to enter the desired security code, e.g.
for 27001.
After entering the correct numerical code press the soft-
key “OK”, the MCS starts. If a wrong number is
entered you have to enter the complete numerical code
again.If an incorrect numerical code has been entered and
confirmed, “PLEASE ENTER SECURITY CODE” will
reappear on the display. The correct code must be
entered once again. If an incorrect code is entered three
times, “WAIT” will appear on the display and the MCS
will be locked out for about 10 minutes. If after 10 min-
utes an incorrect code is entered again, “WAIT” will
appear again and the MCS will be locked out for about
10 minutes. After that you have to wait 1 hour to re-
enter the code.
Note:
The lockout time will only elapse if the MCS remains
switched on.
Introductions