light MERCEDES-BENZ M-Class 2003 W163 Comand Manual

60 Audio
CD operation
Forward
Push the joystick to .
The CD seeks forward as long as you
push the joystick.
Backward
Push the joystick to .
The CD seeks backward as long as you
push the joystick.The tracks on a CD can be scanned in suc-
cession for 8 seconds each.
Activating scan
Press the softkey “SCAN”.
Scan begins and “SCAN” is highlighted
in the softkey menu.Cancelling scan
Press the highlighted softkey
“SCAN”.
or
Push the joystick in any direction.
Playback resumes with the desired
track.
Music seekCD track scan

61 Audio
CD operation
Activating repeat
Press the softkey “RPT”.
The current track repeats until you
switch the function off.
The repeat mode is activated when
“RPT” is highlighted in the softkey
menu.
Cancelling repeat mode
Press the highlighted softkey
“RPT”.Activating random play
Press the softkey “RDM”.
The tracks on the currently selected CD
play back in a random order.
The random mode is activated when
“RDM” is highlighted in the softkey
menu.Selecting the next / previous track
Push the joystick to or .
The next or previous track in the ran-
dom list plays.
Cancelling random play
Press the highlighted softkey
“RDM”.
CD track repeati
You cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.
CD track random play
i
You cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.

63 Audio
Audio Adjustment
Audio Adjustment
The sound settings for all audio sources
can be adjusted.
Audio sources include

Radio FM, AM, WB

Tape

CD (Single CD, CD changer)
Each audio source has its own audio ad-
justments for bass and treble.
All audio sources share the balance and
fader functions.Setting Bass/Treble/Balance/Fader
Press the softkey “ADJ” in any
audio menu.
Your current settings are displayed in
the main audio adjust menu.To select the parameter you want to
adjust, press the softkeys
or .
The selected parameter is highlighted.
To set the desired values, press the
softkeys “-” and “+” or “L”
and “R”.
To reset the selected parameter press
and hold both softkeys , “-” and
“+” or “L” and “R” for longer then 2
seconds.
Once you are satisfied with the sound
setting, press the softkey
“EXIT”.
Audio Adjustment
i
If your vehicle is equipped with the Bose
Audiopilot digital processor, digital
electronics will continually separate
program material from ambient noise
and modify the programming signal so
that you can enjoy the full musical per-
formance without making any adjust-
ments.
The normal operation of the Bose
Audiopilot could be interpreted as
volume fluctuations, however this is
normal operation.

71 Telephone
Telephone operation
FunctionPage
1Unlock code menu72
2Main telephone menu
3Telephone roaming indicator
S: Signal
R: Roaming
R (highlighted): Roaming on
non-home type system
4Signal strength meter
5Incoming call73
6Alphabetic phone book76
7Numeric phone book77

77 Telephone
Telephone operation
By pushing the joystick up or down, you
can select the desired name.
The selected name is highlighted.
or
By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:
If you have found the right name, press
.
Ending the call:
Press .Opening the numeric scrolling mode
Make sure the main telephone menu is
displayed.
Press the softkey “NUM”.
or
Enter up to 2 letters with the number
keys through (e.g.: ).
To correct the last digit, press .
By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.
or
By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:
If you have found the right number,
press .
Ending the call:
Press .

78 Telephone
Telephone operation
Redial
You can redial the last 10 numbers dialed.
Make sure the main telephone menu is
displayed.
Press .
The number list appears on the display.
By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.or
By pushing the joystick to the left or
the right, you can jump to the next or
previous five numbers in the list.
Begin dialing:
If you have found the right number,
press .
Ending the call:
Press .Speed-dialing
Make sure the main telephone menu is
displayed.
Enter the memory location number us-
ing the number keys through
.
You can enter up to 2 digits.
i
If there is no entry in the numbers list,
the message “LAST NUMBERS MEM-
ORY EMPTY” appears in the telephone
menu.
WarningG
If you enter“1” and confirm this memory lo-
cation as described in “Begin dialing”, the
default emergency number 9-1-1 is dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.

82 Navigation
Important notes
Important notes
WarningG
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion- let voice
instructions guide you. Stop at a safe loca-
tion before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by the MCS is a
recommendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights
Stop and yield signs
Parking or stopping zones
One-way streets
Narrow bridges
Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict the MCS
instructions.
WarningG
The DVD reader contains a Class 1 laser
product. There is a danger of invisible laser
radiation if the cover is opened or damaged.
Do not remove the cover. The DVD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
!
MCS calculates the route with the help
of data stored on the navigation DVD.
Only use Mercedes-Benz navigation
DVDs. Using other navigation DVDs
might lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road work) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the DVD only reflects lo-
cal conditions at the time of produc-
tion. DVD maps do not cover all areas
nor all routes within an area.

85 Navigation
Quick reference
FunctionPage
1Color display
2Delete the last input, re-
turn to previous screen
3Press to:
Open and close the con-
trol panel
The CD/DVD slot and
button are located
behind the control panel.
86
4Press to:
Switch the MCS on and
off
Turn to:
Set the volume differ-
ence between an audio
source and navigation
voice during an an-
nouncement
14
16
FunctionPage
5Entering address num-
bers
6Altering the map scale
7Pushing Joystick:
Moves cursor
Pressing :
Confirm selection
8Switching the navigation
system on
Activating the navigation
menu90
9Repeating current (last)
voice instruction
10Altering the map scale114
FunctionPage
11Softkeys for:
“DETR”: Detour
“STOP”: Cancels the
current destination,
“LIST”: Lists the ma-
neuver
“MUTE”: Mutes the voice
instructions
“LGHT”: Changes be-
tween light and dark
mode
“MAP”: Changes be-
tween map screen and
maneuver screen, re-
turning to the map
To activate the softkey
functions, press any soft-
key
119
115
113
114
140

108 Navigation
Destination input
Selecting a destination using the map
If you are not in the map mode, press
any softkey in the navigation
mode.
The softkeys are activated.
Press the softkey “MAP”.
The map and the vehicle’s current posi-
tion icon are displayed.
Move the joystick.
The map cursor moves on the map.
Use the joystick to move the map cur-
sor to the desired destination.
If you have found the desired destina-
tion, press .
The closest street segment or point of
interest to the selected destination is
highlighted and the name appears on
the display.
If this destination is acceptable, press
.
The Confirm Destination menu will ap-
pear.or
If this destination is not acceptable,
move the map cursor to the desired
destination.
For a detailed view, press .
Confirming a Destination
Once the complete address is entered, the
Confirm Destination menu appears.
P82.85-9575-31
P82.85-9565-31

112 Navigation
Route guidance
Route guidance
After you select the destination and the
route is calculated, the navigation system
uses both pictorial displays and voice
prompts to guide you to the destination.
When the route is calculated, the display
switches to the map mode or to the ma-
neuver screen.The system announces “Proceed to the
highlighted Route” and the display shows
“Please Proceed”. The route is now in
progress.
While the system is guiding you on your
route, you can be manually change the dis-
play between modes. The Guidance Dis-
play mode shows an arrow indicating the
next maneuver.
Press the joystick to the right to preview
the next maneuver. Press the joystick to
the left to return to the current maneuver.
i
After entering the destination, you can
change to an audio source. If you have
selected the Hybrid or Arrow mode
(
page 131), the Guidance Display
comes up when a maneuver is started.
The voice instructions are announced
simultaneously.