light MERCEDES-BENZ M-Class 2004 W163 Comand Manual

60 AudioCD operationForward
Push the joystick to .
The CD seeks forward as long as you
push the joystick.
Backward

Push the joystick to .
The CD seeks backward as long as you
push the joystick.The tracks on a CD can be scanned in suc-
cession for 8 seconds each.
Activating scan

Press the softkey SCAN.
Scan begins and SCAN is highlighted in
the softkey menu.Cancelling scan

Press the highlighted softkey
SCAN.
or

Push the joystick in any direction.
Playback resumes with the desired
track.
Music seek
CD track scan

61 Audio
CD operation
Activating repeat
Press the softkey RPT.
The current track repeats until you
switch the function off.
The repeat mode is activated when
RPT is highlighted in the softkey menu.
Cancelling repeat mode

Press the highlighted softkey
RPT.Activating random play

Press the softkey RDM.
The tracks on the currently selected CD
play back in a random order.
The random mode is activated when
RDM is highlighted in the softkey menu.Selecting the next / previous track

Push the joystick to or .
The next or previous track in the ran-
dom list plays.
Cancelling random play

Press the highlighted softkey
RDM.
CD track repeat
iYou cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.CD track random play
iYou cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.

63 Audio
Audio Adjustment

Audio Adjustment
The sound settings for all audio sources
can be adjusted.
Audio sources include
Radio FM, AM, WB

Satellite radio*

Tape

CD (Single CD*, CD changer*)
Each audio source has its own audio ad-
justments for bass and treble.
All audio sources share the balance and
fader functions.Setting Bass/Treble/Balance/Fader

Press the softkey ADJ in any au-
dio menu.
Your current settings are displayed in
the main audio adjust menu.To select the parameter you want to
adjust, press the softkeys
or .
The selected parameter is highlighted.

To set the desired values, press the
softkeys - and + or L and R.

To reset the selected parameter press
and hold both softkeys , - and +
or L and R for longer then 2 seconds.

Once you are satisfied with the sound
setting, press the softkey EXIT.
Audio AdjustmentiIf your vehicle is equipped with the
Bose
® Audiopilot
TM digital processor,
digital electronics will continually sepa-
rate program material from ambient
noise and modify the programming sig-
nal so that you can enjoy the full musi-
cal performance without making any
adjustments.
The normal operation of the Bose
®
Audiopilot
TM could be interpreted as
volume fluctuations, however this is
normal operation.

83 Telephone*
Telephone* operation
Function
Page
1
Unlock code menu
84
2
Main telephone menu
3
Telephone roaming indicator
S: Signal
R: Roaming
R (highlighted): Roaming on
non-home type system
4
Signal strength meter
5
Incoming call
85
6
Alphabetic phone book
88
7
Numeric phone book
89

89 Telephone*
Telephone* operation

By pushing the joystick up or down, you
can select the desired name.
The selected name is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right name, press
.
Ending the call:

Press .Opening the numeric scrolling mode

Make sure the main telephone menu is
displayed.

Press the softkey NUM.
or

Enter up to 2 letters with the number
keys through (e.g.: ).

To correct the last digit, press .

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .

90 Telephone*Telephone* operationRedial
You can redial the last 10 numbers dialed.
Make sure the main telephone menu is
displayed.

Press .
The number list appears on the display.

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.or

By pushing the joystick to the left or
the right, you can jump to the next or
previous five numbers in the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .Speed-dialing

Make sure the main telephone menu is
displayed.

Enter the memory location number us-
ing the number keys through
.
You can enter up to 2 digits.
iIf there is no entry in the numbers list,
the message LAST NUMBERS MEMO-
RY EMPTY appears in the telephone
menu.
Warning
G
If you enter“1” and confirm this memory lo-
cation as described in “Begin dialing”, the
default emergency number 9-1-1 is dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.

94 Navigation*Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion- let voice
instructions guide you. Stop at a safe loca-
tion before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by the MCS is a
recommendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict the MCS
instructions.
Warning
G
The DVD reader contains a Class 1 laser
product. There is a danger of invisible laser
radiation if the cover is opened or damaged.
Do not remove the cover. The DVD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
!MCS calculates the route with the help
of data stored on the navigation DVD.
Only use Mercedes-Benz navigation
DVDs. Using other navigation DVDs
might lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road work) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the DVD only reflects lo-
cal conditions at the time of produc-
tion. DVD maps do not cover all areas
nor all routes within an area.

97 Navigation*
Quick reference
Function
Page
1
Color display
2
Delete the last input, re-
turn to previous screen
3
Press to:
Open and close the con-
trol panel
The CD/DVD slot and
button are located
behind the control panel.
98
4
Press to:
Switch the MCS on and
off
Turn to:
Set the volume differ-
ence between an audio
source and navigation
voice during an an-
nouncement
14
16
142
Function
Page
5
Entering address num-
bers
6
Altering the map scale
7
Pushing Joystick:
Moves cursor
Pressing :
Confirms selection
8
Switching the navigation
system on
Activating the navigation
menu
102
9
Repeating current (last)
voice instruction
a
Altering the map scale
126
Function
Page
b
Softkeys for:
DETR: Detour
STOP: Cancels the cur-
rent destination,
LIST: Lists the maneu-
ver
MUTE: Mutes the voice
instructions
LGHT: Changes between
light and dark mode
MAP: Changes between
map screen and maneu-
ver screen, returning to
the map
To activate the softkey
functions, press any soft-
key
131
127
125
126
150

120 Navigation*Destination inputSelecting a destination using the map
If you are not in the map mode, press
any softkey in the navigation
mode.
The softkeys are activated.

Press the softkey MAP.
The map and the vehicle’s current posi-
tion icon are displayed.

Move the joystick.
The map cursor moves on the map.

Use the joystick to move the map cur-
sor to the desired destination.

If you have found the desired destina-
tion, press .
The closest street segment or point of
interest to the selected destination is
highlighted and the name appears on
the display.

If this destination is acceptable, press
.
The Confirm Destination menu will ap-
pear.or

If this destination is not acceptable,
move the map cursor to the desired
destination.
For a detailed view, press .
Confirming a Destination
Once the complete address is entered, the
Confirm Destination menu appears.






124 Navigation*Route guidanceRoute guidance
After you select the destination and the
route is calculated, the navigation system
uses both pictorial displays and voice
prompts to guide you to the destination.
When the route is calculated, the display
switches to the map mode or to the ma-
neuver screen.The system announces “Proceed to the
highlighted Route” and the display shows
“Please Proceed”. The route is now in
progress.
While the system is guiding you on your
route, you can manually change the display
between modes. The Guidance Display
mode shows an arrow indicating the next
maneuver.
Press the joystick to the right to preview
the next maneuver. Press the joystick to
the left to return to the current maneuver.
iAfter entering the destination, you can
change to an audio source. If you have
selected the Hybrid or Arrow mode
(page 143), the Guidance Display
comes up when a maneuver is started.
The voice instructions are announced
simultaneously.