oil filter MERCEDES-BENZ ML320 1997 Complete User Guide

version FB6 with code ZS6, -
special protection version FB7
with code ZS7, additional battery
100 Ah incl. cutoff relay code E26.
Model 463.248 with: special
protection version, code 979, -
special protection version FB6,
code ZS6, -special protection
version FB7, code ZS7, -additional
battery 100 Ah including cutoff
relay, code E26.AR54.10-P-0003PM
3.1Unclip cover on front
side of engineModel 211, 215, 220, 230.475/476
4.1Remove engine cover
with integrated air filterExcept model 170.466,
203.065/076/265/276, 209.376/476
from 24.4.04, 211.076/276,
215.374, 220.074/174, 230.474,
463.270/271
The air filter is integrated in the
engine cover. Remove the engine
cover or the air filter housing by
pulling it from the cylinder head
covers vertically in the upward
direction.
4.2Remove air filter housingModel 170.466, 203.065/265,
211.076/276, 215.374,
220.074/174, 230.474AR09.10-P-1150SVK
Model 203.076 /276, 209.376 /476
from 24.4.04, 171.473AR09.10-P-1150AC
Model 463.270/271AR09.10-P-1150GX
5Unscrew screw (5/3) *BA15.10-P-1001-
04A
6Detach spark plug
connector (5/1) from the
spark plugs Pry off spark plug connector
(5/1) using open-end wrench,
double over the cylinder head
cover of the spark plugs.
Installation: Observe the
identification of the connector
(arrow) on the cylinder head cover
and the ignition coil of cylinders 1
to 6 or 1 to 8 for the corresponding
spark plug connector (5/1).
Double open-ended wrenchFig. 24
7Separate electrical
connector of ignition coil
of cylinder 1 to 6 (T1/1 Installation: Install new cable
ties.

2001 Mercedes-Benz ML320
1998-2005 ENGINE Electrical System - Engine - 163 Chassis
me
Saturday, October 02, 2010 3:18:54 PMPage 39 © 2006 Mitchell Repair Information Company, LLC.

Fig. 47: Identifying Spark Plugs And Cylinder 4 Ignition Coil

Remove/install and
replacing

Risk of death due to
contact with high-voltage
conductive partsDo not touch parts which
conduct high voltages.
Persons who are carriers
of electronic implants
(e.g. cardiac pacemaker)
may not carry out any
work on the ignition
systemAS15.10-Z-0001-01A
Notes on avoiding damage
to ignition systemEngine 104, 111, 112,
113, 119, 120,271AH15.10-P-0002-01D
1Remove/install air filter
upper section
2
Remove ignition coils
Remove/install ignition
coils
AR15.12-P-2003A
3Disconnect spark plug
connectors Prise over cylinder
head cover.
Double open-ended
wrenchFig. 24
Checking
4Check spark plug Replace, if necessary.

2001 Mercedes-Benz ML320
1998-2005 ENGINE Electrical System - Engine - 163 Chassis
me
Saturday, October 02, 2010 3:18:55 PMPage 72 © 2006 Mitchell Repair Information Company, LLC.

AP18.00-P-0101AR
Engine - oil and filter change
20.1.99

ENGINE
612

Modification notes

12.9.02

Engine oil level modified
Step 9:

Only Model 203:

Up to engine end number: 134 163 oil level
MAX. 135
mm,
MIN 110
mm.

As of engine end number: 134 164 oil level

MAX. 124,5
mm,
MIN 99,5
mm.


Remove

Danger!

Risk of death
cased by vehicle slipping or

toppling off of the lifting platform.
Align vehicle between the columns of the

hydraulic hoist and position the four support

plates below the hoist support points specified

by the vehicle manufacturer.

AS00.00-Z-0010-01A


Danger!

Risk of accident
caused by vehicle starting

off by itself when engine is running.
Risk of

injury
caused by contusions and burns when

working in engine during starting procedure
Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.

Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A


Change the engine oil only when the engine

is at operating temperature

1
Remove trim panel of cylinder head cover

AR01.20-P-5014-02B

2
Replace oil filter element, drain oil filter

Model 203: Remove clamp attaching fuel

line in order to insert wrench socket.

AP18.00-P-0101-06EG

*BA18.20-P-1002-01G

Socket wrench bit

*103589020900

3.1
Suction off engine oil

AP18.00-P-0101-02Z
4.1
Remove rear left frame cross brace

Only necessary when draining engine oil

at oil drain plug.

MODEL 163

f

Model 203 except 203.018/218/718, 209
AR94.30-P-5300P

Model 210

AR94.30-P-5300AB

4.2
Detach lower engine compartment paneling

Only necessary when draining engine oil

at oil drain plug.

f

Only Model 203.018/218/718

AR61.20-P-1105P

5.1
Unscrew oil drain plug, drain engine oil


Install

6.1
Screw in oil drain plug

Replace sealing ring, in order to avoid

leakage.


*BA01.45-P-1003-01A

7
Pour in engine oil
Note specified and approved quality

grades and viscosity classes conforming to

SAE at enduring ambient temperatures.

*BE18.00-P-1001-02B


*BF18.00-P-1001-01A

g

Viscosity classes of engine oils (car engines)
Sheet 224.1

BB00.40-P-0224-01A

8
Run engine and inspect for leaks

9
Switch off engine

10.1
Fit on bottom part of noise encapsulation

Only necessary when draining engine oil

at oil drain plug.

f

Model 210

AR94.30-P-5300AB

MODEL 203, 209

AR94.30-P-5300P

MODEL 163

10.2
Install lower engine compartment paneling.

Only necessary when draining engine oil

at oil drain plug.

f

Only Model 203.018/218/718

AR61.20-P-1105P

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

11
Check oil level approx. 5 min. after switching

off warm engine

Insert oil dipstick up to the stop and keep

to a residence time of at least 3 seconds.

Model 163, 210 with Engine 612
*BE18.00-P-1001-02B
Model 203, Model 209 with Engine 612

On Model 203, Model 209 after oil level

check pay attention to correct seating of the
cap, otherwise it could result in engine

damage.

Only Model 203:

Up to engine end number: 134 163 oil level

MAX. 135
mm,
MIN 110
mm.

As of engine end number: 134 164 oil level

MAX. 124,5
mm,
MIN 99,5
mm.

Measuring rod


*120589072100

12
Install trim panel of cylinder head cover

AR01.20-P-5014-02B


*BA01.20-P-1002-01A


*BA01.20-P-1003-01A

Test values for engine lubrication - general

Number

Designation
Engine

612.961
Engine

612.963

BE18.00-P-1001-02B
Dipstick marking

Color red
t
1

Color black
t
2

Color green
t
3

Color gentian blue
t
4

Numbers on handle
Number
6020760206

Round handle
Color
--

Bottle opener-shaped

handle
Color
11

Designation
Engine

612.961/962/

963/965/966,

613.961
Engine

612.967
Engine

612.990

BA01.45-P-1003-01A
Oil drain plug at oil pan
M12
Nm
---

M14
Nm
303030


Engine lubrication, oil filter

Number

Designation
Engine

612.961/962/
963/967/990,

613.960/961

BA18.20-P-1002-01G
Screw cap at oil filter
Nm
25

Crankcase ventilation, cylinder head cover

Number

Designation
Engine

612.961/

962/967
Engine

612.963
Engine

612.990

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 2

BA01.20-P-1002-01A
Screw of trim panel of cylinder head cover

to cylinder head cover
Nm
1010
8

BA01.20-P-1003-01A
Screw attaching cover panel to charge air

distribution pipe
Nm
1010
-

Designation
Engine

612.961
Engine 612.962/

967
Engine

612.963/966

BF18.00-P-1001-01A
Engine oil
Filling capacity

(oil and filter change)
Liter
7,06.57.5

Specifications for Operating

Fluids
SheetBB00.40-P-0228-01ABB00.40-P-0228-01ABB00.40-P-0228-01A
SheetBB00.40-P-0228-03ABB00.40-P-0228-03ABB00.40-P-0228-03A
SheetBB00.40-P-0228-05ABB00.40-P-0228-05ABB00.40-P-0228-05A
SheetBB00.40-P-0229-01ABB00.40-P-0229-01ABB00.40-P-0229-01A
SheetBB00.40-P-0229-03ABB00.40-P-0229-03ABB00.40-P-0229-03A
SheetBB00.40-P-0229-05ABB00.40-P-0229-05ABB00.40-P-0229-05A


Engine lubrication system

Number

Designation
Engine 612.990

BF18.00-P-1001-01A
Engine oil
Filling capacity

(oil and filter change)
Liter
6.5

Specifications for Operating

Fluids
SheetBB00.40-P-0228-01A
SheetBB00.40-P-0228-03A
SheetBB00.40-P-0228-05A
SheetBB00.40-P-0229-01A
SheetBB00.40-P-0229-03A
SheetBB00.40-P-0229-05A

120 589 07 21 00

Measuring rod

Socket wrench bit

103 589 02 09 00

Commercially available tools
(see Workshop Equipment Manual)

Number

Designation
Make (e. g.)
Order number

WH58.30-Z-1007-16A
Engine oil extractor
Deutsche Tecalemit

Am Metallwerk 11

33659 Bielefeld

1.386950.2

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 3

AF07.00-P-9000B
Engine runs rough, surges or does not turn over
29.4.02

ENGINE
611 in MODEL 203, 202, 210

ENGINE
612 in MODEL 163, 203, 210, 209

ENGINE
613 in MODEL 210, 220

ENGINE
628 in MODEL 163, 220, 211

ENGINE
646 in MODEL 203, 211

ENGINE
647 in MODEL 211

ENGINE
648 in MODEL 220, 211

ENGINE
668 in MODEL 168

ENGINE
612, 628 in MODEL 463

Modification notes

23.3.01

Supersedes STIP 07.16-014 dated 11.12.00

Damage code
Cause
Remedy

07 206 D5
High-pressure pump

To verify whether high pressure pump is

damaged.

#

High pressure pump of common rail

injection system is damaged mechanically.

1
Remove/install/replace high pressure

pump.

When the high pressure pump of the common

rail injection system is damaged metal chips

and/or damage to the pump drive (timing

drive) can occur due to contamination of the

injection system components.
2
Turn high pressure pump by hand with

driver.

If mechanical resistance can be felt,

perform the following tests. Clarify additional

work with ESKULAB by specifying repair work:

#
3
Check driver of high pressure pump or

mount in sprocket for damage (visual

check).

If high pressure pump is locked:
#
4
Check timing

5
Check timing drive for damage.

In each case:
#
6
Remove/install/replace timing chain.

If timing deviates by a crankshaft angle of

more than 20 degrees (corresponding to one

tooth skipped):

#
7
Check pressure loss.

8
Open low pressure connection on high

pressure pump return (plastic line in

area of pressure regulator valve) and

check connection point in rail for chips.

If chips are present when checking

injection system:

#
9
Thoroughly clean all fuel low pressure

lines as well as feed and return lines.

Flush and blow out with compressed air.

10
Remove fuel preheater and fuel filter

with filter housing, replace.

Fuel preheater is only installed in models

202, 203 and 163.

11
Remove/install/replace fuel cooler at

vehicle and engine end.

Not installed in model 210 up to 6/99 and

model 168.

12
Remove fuel tank, replace.

On engine 628:
#

13
Remove/install/replace electric supply

pump.

14
Remove/install/replace injectors, rail

(including pressure regulation valve and

rail pressure sensor), high pressure

lines and injector leak oil rail.*

Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

ENGINE 113.962 in MODEL 463.206 /240 /241 /247 /248 /249
ENGINE 113 // (except 113.990 /991 /995) in MODEL 129, 163, 202, 203, 208, 209, 210, 211, 215, 220, 230
ENGINE 113.982 in MODEL 463.243/246
Shown on engine 112
Fig. 51: Identifying Slide Rail In Timing Case Cover Components
- Shown On Engine 112
Modification notes
20.12.04Engine oil filling capacity with oil filter modified.Engine 113.967*BF18.00-P-1001-01H
Remove/install
Risk of death caused by
vehicle slipping or
toppling off the lifting
platform.Align vehicle between the columns
of the and position the four support
plates below the lifting platform
support points specified by the
vehicle manufacturer.AS00.00-Z-0010-01A
1Remove engine
compartment panelingModels 129, 202, 208, 210AR61.20-P-1105AB
Model 230.474 /475AR61.20-P-1105R
Model 215, 220AR61.20-P-1105M
Models 203, 209AR61.20-P-1105P
Model 211AR61.20-P-1105T
Models 170, 202.0AR61.20-P-1105A

2004 Mercedes-Benz ML350
1998-2005 ENGINE Engine timing - 163 Chassis
me
Saturday, October 02, 2010 3:39:38 PMPage 45 © 2006 Mitchell Repair Information Company, LLC.

Engine lubrication
Engine lubrication
Engine lubrication
113.948/966
BA01.45-P-1003-
01BOil drain screw
to oil panM14Nm3030
NumberDesignationEngine 112
except
112.916/953/975Engine
112.916/953Engine
113.948/966
BF18.00-P-
1001-01HEngine oilFilling capacity
with oil filterLiters8.07.58.0
Filling capacity
without oil filterLiters7.57.07.5
Specifications
for Operating
FluidsSheetBB00.40-P-0229-
01A
BB00.40-P-
0229-01A
BB00.40-P-
0229-01A
SheetBB00.40-P-0229-
03A
BB00.40-P-
0229-03A
BB00.40-P-
0229-03A
SheetBB00.40-P-0229-
05A
BB00.40-P-
0229-05A
BB00.40-P-
0229-05A
NumberDesignationEngine
113.944/944/980981/984/984/986/991Engine
113.963/963/965Engines
113.987/988/990
/
BF18.00-
P-1001-
01HEngine
oilFilling
capacity with
oil filterLiters7.57.58.5
Filling
capacity
without oil
filterLiters-7.08.0
Specifications
for Operating
FluidsSheet-BB00.40-P-
0229-01A
-
Sheet-BB00.40-P-
0229-03A
-
SheetBB00.40-P-0229-05A BB00.40-P-
0229-05A
BB00.40-P-0229-
NumberDesignationEngines
113.940/941/
942/943/960/
961/962/969/
982Engine
112.975Engine
113.967
BF18.00-P-
1001-01H Engine oilFilling capacity
with oil filterLiters8.08.07.5

2004 Mercedes-Benz ML350
1998-2005 ENGINE Engine timing - 163 Chassis
me
Saturday, October 02, 2010 3:39:38 PMPage 48 © 2006 Mitchell Repair Information Company, LLC.

REMOVE/INSTALL ROCKER ARMS - AR05.20-P-2340AU
ENGINE 112
ENGINE 113 except CODE (479) Cylinder shutoff
ENGINE 112.945 in MODELS 463.209 /232 /233 /244 /245 /250
ENGINE 113.962 in MODELS 463.206 / 240 /241 /247 /248 /249 /254
ENGINE 113.982 in MODELS 463.243 /246
Shown on engine 112
Fig. 52: Identifying Rocker Arm Components
- Shown On Engine 112
Filling capacity
without oil filterLiters-7.5-
Specifications
for Operating
FluidsSheetBB00.40-P-
0229-01A
BB00.40-P-
0229-01A
BB00.40-P-
0229-01A
SheetBB00.40-P-
0229-03A
BB00.40-P-
0229-03A
BB00.40-P-
0229-03A
SheetBB00.40-P-
0229-05A
BB00.40-P-
0229-05A
BB00.40-P-
0229-05A

2004 Mercedes-Benz ML350
1998-2005 ENGINE Engine timing - 163 Chassis
me
Saturday, October 02, 2010 3:39:38 PMPage 49 © 2006 Mitchell Repair Information Company, LLC.

Engine lubrication
Engine lubrication
Fig. 48: Identifying Torx Bit Set (000 589 01 10 00)

Fig. 49: Identifying External Torx Set (001 589 76 09 00)
NumberDesignationEngine 112 except
112.916/953/975
Engines
113.940/941/
942/943/960/
961/962/969/ 982Engine
113.944/980/98
1/984/986/991
BF18.00-
P-1001-
01HEngine
oil
Filling capacity
with oil filterLiters8.08.07.5
Filling capacity
without oil filterLiters7.5--
Specifications for
Operating Fluids
SheetBB00.40-P-0229-
01A
BB00.40-P-0229-
01A
BB00.40-P-0229-
01A
SheetBB00.40-P-0229-
03A
BB00.40-P-0229-
03A
BB00.40-P-0229-
03A
SheetBB00.40-P-0229-
05A
BB00.40-P-0229-
05A
BB00.40-P-0229-
05A
NumberDesignationEngine 113.963/965/968
BF18.00-P-1001-01HEngine oil
Filling capacity with oil filterLiters7.5
Filling capacity without oil filterLiters7.0
Specifications for Operating Fluids
SheetBB00.40-P-0229-01A
SheetBB00.40-P-0229-03A
SheetBB00.40-P-0229-05A

2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:56 PMPage 60 © 2006 Mitchell Repair Information Company, LLC.