tailgate MERCEDES-BENZ ML320 1997 Complete Owner's Manual

AR88.20-P-2200GK
Remove/install rear bumper
26.2.01

MODEL
163.113 #A as of 289565,

163.113 #X as of 754620,

163.154 #A as of 289565,

163.128 /157 /175

P88.20-2200-09


Remove/Install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

The connector is located behind side flap on

right C-pillar paneling at vehicle jacking point.

2
Remove panelings (1)

Do not damage paint. Do not break off

clips.

Installation wedge

*115589035900

3
Remove screws (2)


*BA88.20-P-1008-01B

4.1
Remove nut for dirt trap retaining strap from

vehicle underbody

Only if present


*BA88.30-P-1004-01A

5
Pull bumper toward rear and remove

Do not damage paint/wiring harness.

Pull directly over clips (arrows) and

detach from bracket.


Installation:
Align bumper at tailgate and
at taillamps

6.1
Remove rubber seal for E-call emergency call

system antenna from body at right

Only with emergency call system E-Call,

code 349.

7.1
Detach connector from Parktronic system

Only with Parktronic system (PTS), code

220a.


Remove left rubber seal from body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1008-01B
Screw for rear bumper on mount
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GH
Remove/install rear bumper
6.4.99

MODEL
163.113 #A up to 289564,

163.154 #X up to 754619,

163.154 #A up to 289564,

163.136 /172

P88.20-0372-09

A
Covers
C
Screws

B
Nuts


Remove/install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

Connector is located behind side flap of right

C-pillar paneling at jack mounting point.

2
Remove covers (A)

Do not damage paint. Do not break off

clips.

Installation wedge

*115589035900

3
Unscrew mounting nuts (B) from bumper


*BA88.20-P-1004-01B

4
Unscrew screws (C)


*BA88.20-P-1005-01B

5.1
Remove nut from rear mud guard

Only if present


*BA88.30-P-1004-01A

6
Remove bumper toward rear

Do not damage paint.


Installation:
Align bumper at tailgate and
at taillamps

7.1
Remove rubber seal for E-call emergency call

system antenna from body at right

Only with emergency call system E-Call,

code 349.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1004-01B
Nut, rear bumper to frame
Nm
8

BA88.20-P-1005-01BScrews, rear bumper on frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GI
Remove/install rear bumper
11.4.97

MODEL
163.113 #A up to 289564,

163.113 #X up to 754619,

163.154 #A up to 289564,

163.154 #X up to 716524,

163.136 /172 with CODE (849) Spare wheel carrier/spare wheel

P88.20-0369-09

A
Nuts

B
Nut
E

Nuts

C
Screws

D
Spare wheel carrier consoles


Remove/Install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

Connector is located behind side flap of right

C-pillar paneling at jack mounting point.

2
Unscrew nuts (A)

On vehicle underbody behind cross

member

3
Unscrew nut (B)

On vehicle underbody behind cross

member

4
Unscrew bolts from spare wheel carrier

console

Do not damage bolt thread


Bolts fastened with nuts (A) can be driven

out from the rear of the cross member.

5
Remove spare wheel carrier consoles (D)

6
Remove 3 panels from bumper

Do not damage paint. Do not break off

clips.

Long wedge

*115589035900

7
Unscrew bolts (C) from bumper


*BA88.20-P-1007-01B

8
Unscrew nuts (E) from bumper


*BA88.20-P-1006-01B

9.1
Remove nut from rear mud guard

Only if present


*BA88.30-P-1004-01A

10
Remove bumper

Do not damage paintwork on vehicle and

bumper.


Completely turn spare wheel carrier to

rear (maximum clearance for bumper). Pull

bumper to rear and then lift out upward

between spare wheel carrier and vehicle.


Installation:
Align bumper at tailgate and
at taillamps
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GJ
Remove/install rear bumper
6.4.99

MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package

MODEL
163.174

P88.20-2090-09


Remove/install

1.1
Separate antenna of emergency call system

E-Call connector

Only with E-call emergency call system,

code 349. The connector is located behind

the side flap of the right C-pillar paneling at

the jack socket point.

2
Unscrew screws (A) on energy absorber

retaining straps at bottom of cross member

2 each.


*BA88.20-P-1005-01B

3
Pull cover strip off of screws (B) at top of

bumper

Velcro strips

4
Unscrew screws (B) at top of bumper


*BA88.20-P-1005-01B

5
Pull bumper to the rear and remove

Do not damage paintwork/wiring harness.


Installation:
Align bumper at tailgate and

at taillamps.

6.1
Remove rubber seal of antenna of emergency

call system E-Call on right at body

Only with emergency call system E-Call,

Code 349.

7.1
Disconnect connector from Parktronic system

Only with Parktronic system (PTS), code

220a. Remove left rubber seal at body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1005-01B
Screws, rear bumper to frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GJ
Remove/install rear bumper
6.4.99

MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package

MODEL
163.174

P88.20-2090-09


Remove/install

1.1
Separate antenna of emergency call system

E-Call connector

Only with E-call emergency call system,

code 349. The connector is located behind

the side flap of the right C-pillar paneling at

the jack socket point.

2
Unscrew screws (A) on energy absorber

retaining straps at bottom of cross member

2 each.


*BA88.20-P-1005-01B

3
Pull cover strip off of screws (B) at top of

bumper

Velcro strips

4
Unscrew screws (B) at top of bumper


*BA88.20-P-1005-01B

5
Pull bumper to the rear and remove

Do not damage paintwork/wiring harness.


Installation:
Align bumper at tailgate and

at taillamps.

6.1
Remove rubber seal of antenna of emergency

call system E-Call on right at body

Only with emergency call system E-Call,

Code 349.

7.1
Disconnect connector from Parktronic system

Only with Parktronic system (PTS), code

220a. Remove left rubber seal at body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1005-01B
Screws, rear bumper to frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GJ
Remove/install rear bumper
6.4.99

MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package

MODEL
163.174

P88.20-2090-09


Remove/install

1.1
Separate antenna of emergency call system

E-Call connector

Only with E-call emergency call system,

code 349. The connector is located behind

the side flap of the right C-pillar paneling at

the jack socket point.

2
Unscrew screws (A) on energy absorber

retaining straps at bottom of cross member

2 each.


*BA88.20-P-1005-01B

3
Pull cover strip off of screws (B) at top of

bumper

Velcro strips

4
Unscrew screws (B) at top of bumper


*BA88.20-P-1005-01B

5
Pull bumper to the rear and remove

Do not damage paintwork/wiring harness.


Installation:
Align bumper at tailgate and

at taillamps.

6.1
Remove rubber seal of antenna of emergency

call system E-Call on right at body

Only with emergency call system E-Call,

Code 349.

7.1
Disconnect connector from Parktronic system

Only with Parktronic system (PTS), code

220a. Remove left rubber seal at body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1005-01B
Screws, rear bumper to frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GI
Remove/install rear bumper
11.4.97

MODEL
163.113 #A up to 289564,

163.113 #X up to 754619,

163.154 #A up to 289564,

163.154 #X up to 716524,

163.136 /172 with CODE (849) Spare wheel carrier/spare wheel

P88.20-0369-09

A
Nuts

B
Nut
E

Nuts

C
Screws

D
Spare wheel carrier consoles


Remove/Install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

Connector is located behind side flap of right

C-pillar paneling at jack mounting point.

2
Unscrew nuts (A)

On vehicle underbody behind cross

member

3
Unscrew nut (B)

On vehicle underbody behind cross

member

4
Unscrew bolts from spare wheel carrier

console

Do not damage bolt thread


Bolts fastened with nuts (A) can be driven

out from the rear of the cross member.

5
Remove spare wheel carrier consoles (D)

6
Remove 3 panels from bumper

Do not damage paint. Do not break off

clips.

Long wedge

*115589035900

7
Unscrew bolts (C) from bumper


*BA88.20-P-1007-01B

8
Unscrew nuts (E) from bumper


*BA88.20-P-1006-01B

9.1
Remove nut from rear mud guard

Only if present


*BA88.30-P-1004-01A

10
Remove bumper

Do not damage paintwork on vehicle and

bumper.


Completely turn spare wheel carrier to

rear (maximum clearance for bumper). Pull

bumper to rear and then lift out upward

between spare wheel carrier and vehicle.


Installation:
Align bumper at tailgate and
at taillamps
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GH
Remove/install rear bumper
6.4.99

MODEL
163.113 #A up to 289564,

163.154 #X up to 754619,

163.154 #A up to 289564,

163.136 /172

P88.20-0372-09

A
Covers
C
Screws

B
Nuts


Remove/install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

Connector is located behind side flap of right

C-pillar paneling at jack mounting point.

2
Remove covers (A)

Do not damage paint. Do not break off

clips.

Installation wedge

*115589035900

3
Unscrew mounting nuts (B) from bumper


*BA88.20-P-1004-01B

4
Unscrew screws (C)


*BA88.20-P-1005-01B

5.1
Remove nut from rear mud guard

Only if present


*BA88.30-P-1004-01A

6
Remove bumper toward rear

Do not damage paint.


Installation:
Align bumper at tailgate and
at taillamps

7.1
Remove rubber seal for E-call emergency call

system antenna from body at right

Only with emergency call system E-Call,

code 349.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1004-01B
Nut, rear bumper to frame
Nm
8

BA88.20-P-1005-01BScrews, rear bumper on frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GJ
Remove/install rear bumper
6.4.99

MODEL
163.113 /128 /136 /154 /157 /172 /175 with CODE (U49) Styling package

MODEL
163.174

P88.20-2090-09


Remove/install

1.1
Separate antenna of emergency call system

E-Call connector

Only with E-call emergency call system,

code 349. The connector is located behind

the side flap of the right C-pillar paneling at

the jack socket point.

2
Unscrew screws (A) on energy absorber

retaining straps at bottom of cross member

2 each.


*BA88.20-P-1005-01B

3
Pull cover strip off of screws (B) at top of

bumper

Velcro strips

4
Unscrew screws (B) at top of bumper


*BA88.20-P-1005-01B

5
Pull bumper to the rear and remove

Do not damage paintwork/wiring harness.


Installation:
Align bumper at tailgate and

at taillamps.

6.1
Remove rubber seal of antenna of emergency

call system E-Call on right at body

Only with emergency call system E-Call,

Code 349.

7.1
Disconnect connector from Parktronic system

Only with Parktronic system (PTS), code

220a. Remove left rubber seal at body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1005-01B
Screws, rear bumper to frame
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR88.20-P-2200GK
Remove/install rear bumper
26.2.01

MODEL
163.113 #A as of 289565,

163.113 #X as of 754620,

163.154 #A as of 289565,

163.128 /157 /175

P88.20-2200-09


Remove/Install

1.1
Disconnect antenna connector of E-call

emergency call system

Only with emergency call system E-Call,

code 349.

The connector is located behind side flap on

right C-pillar paneling at vehicle jacking point.

2
Remove panelings (1)

Do not damage paint. Do not break off

clips.

Installation wedge

*115589035900

3
Remove screws (2)


*BA88.20-P-1008-01B

4.1
Remove nut for dirt trap retaining strap from

vehicle underbody

Only if present


*BA88.30-P-1004-01A

5
Pull bumper toward rear and remove

Do not damage paint/wiring harness.

Pull directly over clips (arrows) and

detach from bracket.


Installation:
Align bumper at tailgate and
at taillamps

6.1
Remove rubber seal for E-call emergency call

system antenna from body at right

Only with emergency call system E-Call,

code 349.

7.1
Detach connector from Parktronic system

Only with Parktronic system (PTS), code

220a.


Remove left rubber seal from body.

8
Install in the reverse order


Bumper
Number

Designation
Model 163

BA88.20-P-1008-01B
Screw for rear bumper on mount
Nm
8

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1