CD player MERCEDES-BENZ ML350 1997 Complete Owner's Manual

Fig. 54: Display Layout Of Radio (A2) During Navigation - Shown On Model 203
When traveling within the digitized map area, the following information calculated by the navigation processor
is available to the user (partially to be called with "I" (INFO) button):
Route list indicating the distance to be driven on the affected streets or roads
Distance to destination and estimated time of arrival (the time must be set correctly for this purpose).
Driving recommendations
Arrow indicating the driving direction
Current location, in other words name of city and street, latitude and longitude
Name of the next road into which the vehicle should turn
Distance to next turning point specified in units of length or as bar graph (3)
The navigation processor generates graphic signals for the navigation system symbols.
Actual route guidance is supported by voice output via the vehicle loudspeakers.
GUIDANCE IN DIGITIZED MAP AREA, FUNCTION - GF82.61-P-4000GI
MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357)
Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
When driving within the digitized map area the following information is available to the user:
Current position and vehicle route on digital map (illustrated in figure)
Distance from destination and anticipated time of arrival
Destination guidance in
non-digitalized map area,
function GF82.61-P-4001C

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 93 © 2006 Mitchell Repair Information Company, LLC.

GUIDANCE IN NON-DIGITIZED MAP AREA, FUNCTION - GF82.61-P-4001GI
MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357)
Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
When traveling outside of the digitized map area (e.g. company grounds, parking buildings, dirt roads,...),
however still within the CD-ROM map boundaries, the navigation processor switches over to " Guidance in
non-digitized map area " .
The following message appears on the display of the radio and navigation module (A2/56) :
"OFF ROAD "
In this case only basic location finding (dead reckoning) with correction by the GPS data is performed (no map
matching )
After reentering the digitized map area, the system automatically continues with " Guidance in digitized map
area ".
With the aid of the GPS position the possible roads, on which the vehicle could be located, are determined.
However, this can result in temporary delays in the guidance function.
DYNAMIC ROUTE GUIDANCE, FUNCTION - GF82.61-P-4003GI
MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357)
Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
Dynamic route guidance,
function GF82.61-P-4003QA
Basic location finding,
function GF82.61-P-3006GI
Global positioning
system location finding,
function GF82.61-P-3007GI
Guidance in digitized
map area, function GF82.61-P-4000GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 95 © 2006 Mitchell Repair Information Company, LLC.

RADIO AND NAVIGATION MODULE, DESIGN - GF82.61-P-4109-03GI
The following is integrated into the radio and navigation module (A2/56) (maximum scope):
Graphic compatible 5" LCD color display
Navigation processor with GPS receiver and gyrosensor
Single CD drive for playing audio CD's (option)
Navigation CD drive for loading navigation data or for playing audio CD's (optional)
Telephone unit (optional)
Radio tuner
Audio amplifier
CC player
The radio and navigation module (A2/56) has the following digital interfaces:
Digital data bus (D2B)
K-cable (diagnosis interface)
Fig. 58: Identifying Radio And Navigation Module (A2/56) Design

RADIO AND NAVIGATION MODULE, FUNCTION - GF82.61-P-4109-04A
Models 163, 168, 170, 208, 209, 210 with code 353
Processing key signals
The controls on the radio (A2) are read in via I/O ports of the microcontroller and made available to the central
computer. Depending on the system function the button operations are processed further in the central computer
or conveyed via the Digital Data Bus (D2B) or interior CAN (CAN B) in the form of a data telegram to the
system components involved (e.g. CD changer).
Display

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 100 © 2006 Mitchell Repair Information Company, LLC.

Map data.
The digitized map area on the CD-ROM contains towns, cities, streets, intersections and their attributes (e.g.:
one-way streets, turn prohibitions, ...). It does not contain information about company and private ground,
farms, housing estates and agricultural roads.
Gyrosensor
The gyrosensor determines the direction change of the vehicle. It is installed in the navigation processor .
Calibration is not required.
RADIO AND NAVIGATION UNIT, LOCATION/PURPOSE/DESIGN/FUNCTION - GF82.61-P-4109A
MODEL 163,168,170, 208, 210 with CODE (353) Audio 30 APS
Fig. 59: Identifying Radio And Navigation Unit

Radio and navigation
unit, location GF82.61-P-4109-01A
Radio and navigation
unit, purposeRadio reception and
operation
Input/output and control
unit for navigation
Amplification of audio
signals
Control of integrated CD
player and (optional) CD
changer (A2/6)

Radio and navigation
unit, design GF82.61-P-4109-03A
Radio and navigation
unit, function GF82.61-P-4109-04A

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 104 © 2006 Mitchell Repair Information Company, LLC.

RADIO/NAVIGATION MODULE , LOCATION/PURPOSE/DESIGN/FUNCTION - GF82.61-P-4109GI
MODEL 163 as of 1.9.01 with CODE (522) Modular cont rol system (MCS) radio USA with CODE (357)
Navigation system - additional uni t with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
Fig. 60: Identifying Radio And Navigation Module

Fig. 61: Identifying Radio And Navigation Module Connectors

Radio and navigation
module, location GF82.61-P-4109-01GI
Radio and navigation
module, purposeCentral control for the
following systems:
Radio, CC player, CD
player (optional) and


2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electr ical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 105 © 2006 Mitchell Repair Information Company, LLC.

Global positioning system antenna,
location / task / design / functionModels 170, 208.4GF82.61-P-4106A
Models 203.0/2/7,
209.3GF82.61-P-4106E
Global positioning system antenna,
location/ taskModel 209.4GF82.61-P-4107Q
Antenna splitter,
location/task/design/functionModel 163GF82.85-P-3107B
CD player with changer,
location/task/design/ functionModels 209.3/4GF82.64-P-3113Q
Models 203.0/2/7
with code (819) CD
changer 6-discGF82.64-P-3113PA
Models 163, 208,
210 with code (819)
CD changer 6-discGF82.64-P-3113B
Sound amplifier,
location/task/design/functionModels 209.3/4 with
code (810) sound
system
Models 203.0/2/7 up
to 23.4.04 with code
(810) Sound systemGF82.62-P-3100Q
Models 203.0/2/7 as
from 24.4.04 with
code (810) sound
system, except code
(498) Japan version,
except code (494a)
USA versionGF82.62-P-3100PM
Telephone interface,
location/task/design/ functionModels 203.0/2/7,
209.3/4GF82.70-P-3107Q
Transmitter/receiver unit,
location/task/design/ functionModels 203.0/2, 210
With code (853) MB
Standard telephone
With code (855)
TELE AID
With code (930)
Taxi emergency call
Models 203.7, 208.3,
209.3/4
With code (853) MB
Standard telephone
With code (855)
TELE AIDGF82.95-P-4300A
Table of contents, function description
of Audio 30 APS GF82.61-P-0998ZZ

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 107 © 2006 Mitchell Repair Information Company, LLC.

CD PLAYER WITH CHANGER, LOCATION - GF82.64-P-3113-01GI
The CD player with changer is located behind the access flap in the right side cover of the trunk.
Fig. 73: Identifying CD Player With Changer Location

CD PLAYER WITH CHANGER, FUNCTION - GF82.64-P-3113-02GI
Controlling CD player
The CD player with changer (in trunk) (A2/6) is controlled by the radio and navigation module (A2/56)via
the digital data bus (D2B).
The CD player generates reports on the following operating conditions:
No magazine in CD changer
Magazine assignment (only with music CD)
Number of current CD
Number of current title
List of occupied slots (CDs)
Title number per disc
Current operating state (acoustic playback of radio signals, pause, etc.)
The messages are stored on the digital data bus D2B ) and interpreted by the radio and navigation module
(A2/56) .
CD playback
The audio data is stored digitally on the CD-ROM . The audio CD is driven by a motor in the CD-player with
changer (in trunk) (A2/6) .
location/task
Contents - function description
of antenna system (ATS) GF82.62-P-0999GHZ

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:06 PMPage 121 © 2006 Mitchell Repair Information Company, LLC.

The laser-optical device scans the non-labeled side of the rotating CDwithout making contact and converts the
digital optical signals into electrical signals. Small interruptions in the data flow of the laser optics caused by
scratches or contamination on the audio CD are compensated by the D/A converter supplementing the missing
values .
The electrical signals are then decoded in the CD player with changer (in trunk) (A2/6) and transmitted via
the digital data bus ( D2B ) to the radio and navigation module (A2/56) via the audio signal processing or
when the sound amplifier (A2/13) (code 810) is installed to the loudspeakers.
Jumps and interruptions during playback
On bad roads or in the event of heavy vibrations , jumps and interruptions can occur during playback. In
such cases do not start CD mode until better road conditions are present.
In the event of wet weather conditions and strong deviations in the ambient temperatures moisture can collect in
the CD player housing (condensation formation). This could also lead to malfunctions in the playback. In such
cases provide for sufficient ventilation of the CD player and the trunk.
CD PLAYER WITH CHANGER, LOCATION/TASK/DESIGN/FUNCTION - GF82.64-P-3113B
MODELS 163, 208, 210, 215, 220 with CODE (819) 6-disc CD changer
MODELS 208, 210, 215, 220 with CODE (819a) CD changer with CODE (498) Japanese version
Shown on model 220 (as of 1.9.02)
Fig. 74: Identifying CD Changer (In Trunk) Location

CD player with changer,
locationThe CD player with
changer (in the trunk)
(A2/6) is located in the
trunk near the left side
wall.
Model 163GF82.64-P-3113-01GI
Models 208, 210GF82.64-P-3113-01D
Models 215, 220 with GF82.64-P-3113-01F

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:06 PMPage 122 © 2006 Mitchell Repair Information Company, LLC.

CD PLAYER WITH CHANGER, LOCATION/PURPOSE/DESIGN/FUNCTION - GF82.64-P-3113GI
MODEL 163 with CODE (522) Modular control system (MCS) radio USA with CODE (357) Navigation
system - additional unit with CODE (818b) Single CD player - additional unit with CODE (819) 6-disk
CD changer in trunk with CODE (491) U.S. version
code 498
Models 215, 220 without
code 498GF82.64-P-3113-01E
CD player with changer,
purposePlaying audio
compact discs (CD)
Changing CDs
contained in the
magazine

CD player with changer,
design6-slot CD changer
magazine
only: 12-slot
CD changer
magazine
Digital Data Bus
(D2B) interface

The factory planned
installation position for
the CD changer is vertical,
whereby other installation
positions are possible by
adaptation of the spring
locations.

CD player with changer,
functionModels 208, 210GF82.64-P-3113-02C
Model 215, 220GF82.64-P-3113-02B

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:06 PMPage 123 © 2006 Mitchell Repair Information Company, LLC.

Fig. 75: Identifying CD Player With Changer
GPS/CTEL ROOF ANTENNA, LOCATION - GF82.70-P-4111-01GH
Model 163
Location, illustration valid up to 31.08.01:
The CTEL and GPS roof antenna (A2/49) is mounted on the rear of the roof in the middle of the vehicle.
CD player with changer,
location GF82.64-P-3113-01GI
CD player with changer,
purposePlaying audio
compact discs (CD).
Changing CD's
contained in the
magazine

CD player with changer,
designCD changer
magazine for 6 CD's
Digital data bus
(D2B) interface

The installation position
of the CD changer
predefined by the factory
is vertical, however
another installation
location is also possible
by adapting the spring
location

CD player with changer,
function GF82.64-P-3113-02GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:06 PMPage 124 © 2006 Mitchell Repair Information Company, LLC.