park MERCEDES-BENZ ML350 1997 Complete Repair Manual

AD54.30-P-3000-02A
Warning buzzer function check IC

Warning buzzer
D
Light reminder and parking brake reminder

D
Key reminder

I
D
Seat belt reminder

for approx. 6 s

I
,
M
,
H
and Korea

for approx. 12 s

G

The warning tone is interrupted as soon as the seat belt buckle is

inserted.

D
Warning tone for a shortage of oil

D
Vehicle speed warning

G
> 120 km/h, v-limit warning (cruise

control)

D
In addition the symbol for vehicle speed warning appears in the
instrument cluster with multi-function display.
D

On model 163 a warning tone sounds for approx. 5 seconds if the

CAN signal is unusable.

D
Model 168 with automatic clutch system features an audible gear

warning.

It sounds if a gear is engaged at the same time as the driver's

door is opened. Brake and accelerator pedal must not be

operated.

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR82.30-P-6100GHRemoving and installing wiper arm
7.3.97

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175

P82.30-0386-11

1
Protective cap

2
Nut


Remove/install

Danger!

Injury hazard
by trapping or crushing, in

extreme cases with loss of limbs when

reaching into windshield wiper mechanism
Always remove ignition key when working on

windshield wiper mechanism.

AS82.30-Z-0001-01A

1
Ensure that wiper motor is in park position

2
Open protective cap (1)

3
Unscrew nut (2)


*BA82.30-P-1002-01C

4
Take off wiper arm


Hold wiper arm on mounting section to

avoid hitting against windshield.

5
Install in the reverse order


Windshield wipers

Number

Designation
Model

Series 163

BA82.30-P-1002-01C
Nut for wiper arm on windshield
Nm
18

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR82.30-P-6400GH
Remove/install wiper system
3.3.97

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175

P82.30-0393-06

1
Nuts

2
Wiper system

3
Connector

M6/1
Wiper motor


Remove/install

Danger!

Injury hazard
by trapping or crushing, in

extreme cases with loss of limbs when

reaching into windshield wiper mechanism
Always remove ignition key when working on

windshield wiper mechanism.

AS82.30-Z-0001-01A

1
Ensure that wiper motor is in park position

2
Remove cover on air intake

AR83.25-P-1405GH

3
Unscrew nuts (1) on wiper arm

4
Lift wiper system (2)

5
Disconnect connector (3) from the wiper

motor (M6/1)

6
Remove wiper system (2)

7
Install in the reverse order

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1