MERCEDES-BENZ ML430 1997 Complete Repair Manual
ML430 1997
MERCEDES-BENZ
MERCEDES-BENZ
https://www.carmanualsonline.info/img/4/57307/w960_57307-0.png
MERCEDES-BENZ ML430 1997 Complete Repair Manual
Trending: relay, gas mileage, oil filter, coolant temperature, battery, keyless, ECO mode
Page 1181 of 4133
Fig. 10: 210 589 00 37 00 Pliers
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig. 11: Commercially Available Tools
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 12 © 2006 Mitchell Repair Information Company, LLC.
Page 1182 of 4133
Fig. 12: Auxiliary Repair Materials
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Disconnect Ground Lead From Battery
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 13 © 2006 Mitchell Repair Information Company, LLC.
Page 1183 of 4133
Fig. 13: Disconnecting Ground Lead From Battery
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
1.1 - Open engine hood.
2 - Disconnect ground cable of battery. See Fig. 13
.
NOTE: Model Series 163.
NOTE: To protect against unwanted contact of the disconnected ground line (1)
W16/4 insulate cable lug of the ground line.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 14 © 2006 Mitchell Repair Information Company, LLC.
Page 1184 of 4133

Connect ground cable.
4 - Code radio.
5 - Set time at instrument cluster
6.1 - Activate steering angle sensor.
7.1 - Synchronize tilt/slide sunroof.
8.1 - Synchronize lamella (thin plate) sliding roof.
9.1 - Synchronize power windows.
Torque Specification; Nut Of Ground Cable To Body NOTE: After opening the vehicle wait for at least 4 minutes before disconnecting
the battery otherwise the alarm will be triggered.
NOTE: Model 163: Tighten the nut (5) of the ground line (1) to the specified
torque. Perform work described below only when quiescent current
retention unit was not connected. Model Series 163 see Torque
Specification; Nut Of Ground Cable To Body.
NOTE: MB (models 163).
Hi-Line, premium with Bose (model 163).
NOTE: If necessary set time at stationary heater timer.
NOTE: Model 163 with Code 414.
Open tilt/slide sunroof and hold down switch. Sliding/pop-up roof
mechanism moves to end position, pulls back 1/4 turn and stops.
NOTE: Open tilt/slide sunroof and hold down switch. Sliding/pop-up roof
mechanism moves to end position, pulls back 1/4 turn and stops.
NOTE: Model 163 as of VIN A289565, X754620.
Press power windows switch up to the 1st pressure point and, after
reaching the upper end position of the window, keep pressed for further 5
seconds.
NumberDesignationModel Series 163
BA54.10--P-1001--01ANut of ground cable to bodyNM18
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 15 © 2006 Mitchell Repair Information Company, LLC.
Page 1185 of 4133
Removing & Installing Wire Cable/Transmission For Parking Shift Lock On Transmission
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 16 © 2006 Mitchell Repair Information Company, LLC.
Page 1186 of 4133
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 17 © 2006 Mitchell Repair Information Company, LLC.
Page 1187 of 4133
Fig. 14: Removing & Installing Wire Cable
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Removing -
1 - Turn cable/transmission (80) on transmission counterclockwise and remove. See Fig. 14
.
Installation -
2 - Install cable/transmission (80) and turn clockwise.
Adjusting Wire Cables For Parking Lock Interlock
NOTE: For removal and installation, move selector lever or range selector lever to
position "P" and, with control cable/gears removed, leave in position "P".
NOTE: After installation, adjust cable for parking shift lock and check for proper
operation.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 18 © 2006 Mitchell Repair Information Company, LLC.
Page 1188 of 4133
Fig. 15: Adjusting Wire Cables For Parking Lock Interlock
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Modification Notes - Sequence of work steps revised.
NOTE: The selector lever must be in position "P" for all adjustment work.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 19 © 2006 Mitchell Repair Information Company, LLC.
Page 1189 of 4133

1 - Pretension spring on adjusting button (79a). See Fig. 15.
2 - Turn key in steering lock to position "O".
3 - Adjust wire cable/steering lock (79) by pressing adjusting button (79a) (arrow).
Adjusting wire cable/transmission.
4 - Pretension spring on adjusting button (80a).
5 - Turn key in steering lock to position "O".
6 - Adjust wire cable/transmission (80) by pressing the adjusting button (80a) (arrow) Figure A.
AUTOMATIC TRANSMISSION, CONTENTS, FUNCTION DESCRIPTION
Automatic Transmission, Function
See AUTOMATIC TRANSMISSION, FUNCTION
.
Automatic Transmission, Location Of Mechanical Components
See AUTOMATIC TRANSMISSION, LOCATION OF MECHANICAL PARTS
.
Automatic Transmission, Location Of Electrical/Electronic Components
See AUTOMATIC TRANSMISSION, LOCATION OF ELECTRIC/ELECTRONIC
COMPONENTS.
Automatic Transmission, Location Of Hydraulic Components
See AUTOMATIC TRANSMISSION, POSITION OF HYDRAULIC COMPONENTS
.
Automatic Transmission, Location Of Floor Shift Components.
See AUTOMATIC TRANSMISSION, LOCATION OF FLOOR SHIFT COMPONENTS
.
Automatic Transmission, Selector Lever Positions
See AUTOMATIC TRANSMISSION, SELECTOR LEVER POSITIONS
.
Automatic Transmission, Driver Information Adjusting wire cable/steering lock.
The wire cable/transmission must be installed to adjust the wire cable/steering
lock.
NOTE: For transmissions without Touch Shift.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 20 © 2006 Mitchell Repair Information Company, LLC.
Page 1190 of 4133

See AUTOMATIC TRANSMISSION, DRIVER INFORMATION
.
Automatic Transmission, Gear Ratios
See AUTOMATIC TRANSMISSION, GEAR RATIOS
.
Gearshift System, Function
See FUNCTION OF GEAR SHIFT
.
Power Transmission, Function
See AUTOMATIC TRANSMISSION, POWER TRANSMISSION, FUNCTION
.
Power Flow In 1st Gear, Function
See POWER FLOW IN 1ST GEAR, FUNCTION
.
Power Flow In 2nd Gear, Function
See POWER FLOW IN 2ND GEAR FUNCTION
.
Power Flow In 3rd Gear, Function
See POWER FLOW IN 3RD GEAR FUNCTION
.
Power Flow In 4th Gear, Function
See POWER FLOW IN 4TH GEAR FUNCTION
.
Power Flow In 5th Gear, Function
See POWER FLOW IN 5TH GEAR FUNCTION
.
Power Flow In Reverse, Function
See POWER FLOW IN REVERSE, FUNCTION
.
Gearshift System, Function
See FUNCTION OF GEAR SHIFT
.
Function Of Gear Change
See FUNCTION OF GEAR CHANGE
.
2001 Mercedes-Benz ML320
1998-03 AUTOMATIC TRANSMISSIONS Complete Transmissions - ML 320 - 722.662
me
Saturday, October 02, 2010 3:15:25 PMPage 21 © 2006 Mitchell Repair Information Company, LLC.
Trending: brakes, key battery, check engine light, fuel consumption, reset sun roof, ECU, flat tire