trip computer MERCEDES-BENZ ML450 HYBRID 2010 W164 Owner's Manual

1
Fuel consumption
; Average fuel consumption From Start as
shown in the multifunction display of the
instrument cluster in the Trip computer
menu.
= Generated electric power
Each bar in the chart represents the average
value for 1 minute.
Resetting values The values are reset together when resetting
the trip computer in the
From Start
submenu. Refer to the Operator’s Manual. Driving and parking
Safety notes
G
Warning!
When your vehicle is in electric drive mode the
engine produces significantly lower noise
levels. Other motorists or pedestriants,
especially those who are visually or hearing
impaired, may be unable to hear your vehicle
while it is in motion. This is particularly true
when driving at lower speeds and during
parking maneuvers. At all times, it is the
responsibility of the driver to be aware of their
surroundings, especially in these low speed
situtations. Otherwise other road users could
be seriously or fatally injured. G
Warning!
Make sure absolutely no objects are
obstructing the pedals’ range of movement. Keep the driver’s footwell clear of all
obstacles. If there are any floormats or
carpets in the footwell, make sure the pedals
still have sufficient clearance.
During sudden driving or braking maneuvers
the objects could get caught between or
under the pedals. You could then no longer
brake or accelerate. This could lead to
accidents and injury.
Starting the engine
:
READY indicator
X Switch on the ignition.
X Apply the brake pedal fully and release it.
The self-test of the RBS is completed. For
more information on the RBS, see
(Y page 9).
X Observe the notes on “Starting the engine”
in the Operator’s Manual and start the
combustion engine.
Silent-Start mode
The combustion engine may not start each
time you start the vehicle with the SmartKey
or with KEYLESS-GO.
Depending on various conditions such as the
charging level of the high-voltage battery, you
may drive off with electrical energy alone. The
vehicle is then in Silent-Start mode. The
READY indicator : will then indicate that the
HYBRID systems are operational. 16
Controls in detail 164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-12T15:08:04+02:00 - Seite 16