instrument panel MERCEDES-BENZ ML500 1997 Complete Repair Manual

Jacket tube
REMOVING AND INSTALLING CENTER AIR NOZZLE - AR68.10-P-1150GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
panel (3)
7Unscrew screws (11) for steering column
(10) from instrument panel carrier (3) *BA46.10-P-
1006-03C
8Remove nuts (12) for steering column (10)
from instrument panel carrier (3) *BA46.10-P-
1007-03C
9Unscrew screws (4) for instrument panel
carrier (3) from middle tunnel
10Disconnect connector from steering column
height adjustment switch (20)
11Disconnect connector from MB
immobilizer switching unit (18)
12Disconnect connector from steering/ignition
switch (19)
13Disconnect wiring harness (15) from
instrument panel carrier Installation:Ensure that wiring
harness is routed correctly on
instrument panel carrier.

14Remove wiper system AR82.30-P-
6400GH
15Unscrew nuts for instrument panel carrier
(3) on firewall Installation: Install new self-
locking nuts.
16Remove caps on A-pillar (1)
17Unscrew screws (2) for instrument panel
carrier (3) from A-pillar
18
Remove instrument panel carrier (3) and
take out of passenger compartment to side
through passenger doorBe careful not to damage center
console when removing and
installing.

19Install in the reverse order
NumberDesignationMODEL Series
163
BA46.10-P-1006-
03CScrew for jacket tube on upper instrument panel carrierNm20
BA46.10-P-1007-
03CJacket tube collar nut on instrument panel carrier at
bottomNm18

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 24 © 2006 Mitchell Repair Information Company, LLC.

Fig. 19: Identifying Glove Compartment Lid, Screw & Stop Lever
DISASSEMBLING AND ASSEMBLING GLOVE COMPARTMENT LID - AR68.10-P-1220GH
MODEL 163.136 /154 /172 up to 31.8.99

Removal, installation
1Remove glove compartment Installation: Adjust glove compartment
lid and check for proper functionAR68.10-P-
1400GH
2Unhook stop lever (1) on left and
right on instrument panel Slightly lift glove compartment lid (3)
and unhook stop lever (1).
3Unscrew screws (2) on hinge
4Remove glove compartment lid (3)
5Reinstall in opposite order

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 26 © 2006 Mitchell Repair Information Company, LLC.

Fig. 21: Identifying Glove Compartment Lid Adjustments
REMOVE/INSTALL GLOVE COMPARTMENT - AR68.10-P-1400GH
MODEL 163.136 /154 /172 #A up to 145272
Adjusting

During entire operation pay attention to uniform
transition, gap and adjustment possibilities on
hinge (arrows) between glove compartment lid
(1) and instrument panel (2).

1Loosen screws (3) on striker eye (4)
Installation: Adjust transition at
top of striker eye (4). Glove
compartment lid (1) should make slight
contact to stop buffers.

2Remove glove compartment AR68.10-P-
1400GH
3Adjust gapFor this purpose loosen hinge screw
(5) from hinge (6).
4Install glove compartment AR68.10-P-
1400GH
5Check for easy motion and proper function

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 28 © 2006 Mitchell Repair Information Company, LLC.

Fig. 23: Identifying Glove Compartment Lid, Screws, Spreading Rivets & Lamp

Remove/Install
1Open glove compartment lid (1)
2Unclip glove compartment lamp (E13/1)
and disconnect connector
3Unscrew bolt (2) Torx bit setFig.
24
4Remove upper spreading rivets (5) from
glove compartment (3) Press pressure pin approx. 4 mm upward and
remove spreading rivet downward.
5Pull glove compartment (3) out of
instrument panel (4)
6Install in the reverse order Align upper edge of glove compartment lid
(1) in relation to instrument panel (4).

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 30 © 2006 Mitchell Repair Information Company, LLC.

Fig. 24: Identifying Torx Bit Set (000 589 01 10 00)
REMOVING AND INSTALLING COVER BELOW INSTRUMENT PANEL (LEFT) - AR68.10-P-1500GH
MODELS 163.113 /128 /136 /154 /157 /172 /174 /175
Fig. 25: Identifying Cover Below Instrument Panel (Left)

REMOVE/INSTALL COVER BELOW INSTRUMENT PANEL (RIGHT) - AR68.10-P-1520GH
MODEL 163.136 /154 /172 #A up to 145272,163.136 /154 /172 #X up to 708318
Remove/install
1Remove plug (1) 2 each.
2Unscrew screw (2) 2 each.
Installation: Observe clips (3).
3Unlock and remove data link connector (X11/4)
4Take off cover (4)
5Install in the reverse order

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 31 © 2006 Mitchell Repair Information Company, LLC.

Fig. 26: Identifying Cover Below Instrument Panel (Right)
REMOVE/INSTALL COVER BELOW INSTRUMENT PANEL (RIGHT) - AR68.10-P-1520GI
MODEL 163.136 /154 /172 #A as of 145273,163.136 /154 /172 #X as of 708319,163.113 /128 /157 /174 /175

Remove/Install
1Unhook catch (3) on blower motor Risk of breakage!
2Unclip cover (1) Cover is fastened with 2 clips
(2).
3Disconnect electrical connector from interior socket
(X58/1)
4Install in the reverse order

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 32 © 2006 Mitchell Repair Information Company, LLC.

Fig. 27: Identifying Cover Below Instrument Panel (Right)
REMOVE/INSTALL STOWAGE COMPARTMENT OR BEVERAGE HOLDER - AR68.10-P-1600GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 driver's side
Instrument panel is illustrated disassembled for clarity.
Vehicles up to VIN A145272, X708318
Remove/Install
1Unscrew Torx screws (1) form cover (2)
2Fold locking lever (3) downward
3Pull cover (2) downward and lay down
4Disconnect electrical connector from interior socket (X58/1)
5Install in the reverse order

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 33 © 2006 Mitchell Repair Information Company, LLC.

Fig. 28: Identifying Stowage Compartment Components (Driver's Side Vehicles Up To VIN A145272,
X708318)
Instrument panel is illustrated disassembled for clarity
Vehicles as of VIN A145273, X708319

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 34 © 2006 Mitchell Repair Information Company, LLC.

Fig. 29: Identifying Stowage Compartment (Driver's Side Vehicles As Of VIN A145273, X708319)

Remove/install
1Remove left and right cover below instrument cluster Risk of breakage!
2Unscrew bolt (10)
Up to VIN A145272, X708318: 3
screws.
As of VIN A145273, X708319: 1
screw.

3Unscrew screws (9) from bottom side of instrument
panel
4.1Remove entry lamp from bottom of instrument panel Only as of VIN A145273,
X708319.
5.1Remove paneling (8) Only as of VIN A145273,
X708319.
6Unscrew screw (11) from left side of instrument panel
7Loosen instrument panel bottom (2) at side on
instrument panel (1) and pull downward Carefully pull downward to
prevent damaging instrument.
8Unscrew screws (4) from beverage holder (3) at inside
of instrument panel bottom section (2)
9Unscrew screws (5) at outside of instrument panel
bottom section (2) At parking brake release handle
(6).
10Remove beverage holder (3)

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 35 © 2006 Mitchell Repair Information Company, LLC.

REMOVE/INSTALL STOWAGE COMPARTMENT OR BEVERAGE HOLDER - AR68.10-P-1600GI
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 passenger side
Instrument panel is illustrated disassembled for clarity.
Vehicles up to VIN A145272, X708318
Fig. 30: Identifying Stowage Compartment Components (Passenger Side Vehicles Up To VIN A145272,
X708318)
Instrument panel is illustrated disassembled for clarity.
Vehicles as of VIN A145273, X708319
11Install in the reverse order

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Saturday, October 02, 2010 3:35:21 PMPage 36 © 2006 Mitchell Repair Information Company, LLC.