Sensor MERCEDES-BENZ ML500 1997 Complete Repair Manual

Auto button, location/purpose/functionRear ventilation operating module
2147GI
GF83.40
-P-
2147GJ
AC OFF button, location/purpose/function GF83.40-P-
2107GI
Residual heat button,
location/purpose/function GF83.40-P-
2148GI
Rear compartment air distribution button,
location/purpose/function GF83.40-P-
2173GI
All-activity module,
location/purpose/function GF54.21-P-
4110GH
Air conditioner housing, location/purpose/
design/function GF83.40-P-
2105GI
Auxiliary fan, location/purpose/function
Engine 111.977, 112.942, 112.970
with code 580 up to 31.08.01
Engine 112.942, 112.970 with code
580a as of 01.09.01
GF83.40-P-
2162GH
Engine and AC electric suction fan with
integrated control, location/purpose/function
Engine 113.942 with code 580a up to
31.08.01 Engine 113.981, 113.965,
612.963, 628.963, with code 580a as o
f
01.09.01
GF83.40-P-
2172GI
Condenser, location/purpose/function GF83.40-P-
2152GC
Evaporator location/purpose/design/function GF83.40-P-
2121GC
Fluid reservoir, location/purpose/function GF83.40-P-
2153GI
Expansion valve, location/purpose/design/
function GF83.40-P-
2123GC
Refrigerant pressure and temperature sensor,
location/purpose/function GF83.40-P-
2171GI
Refrigerant compressor, location/purpose/
design/function GF83.55-P-
2100P
Control valve, location/purpose/function GF83.55-P-
2102P
Belt pulley, location/purpose/design/function GF83.55-P-
2103P
Pressure relief valve,
location/purpose/function GF83.55-P-
2104P
In-car temperature sensor location/purpose/
function GF83.57-P-
2115GI
Ice-up protection temperature sensor,
location/ purpose/function GF83.57-P-
2113GH
Blending air flap actuator, location/purpose/ GF83.57-P-

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:16 PMPage 119 © 2006 Mitchell Repair Information Company, LLC.

REFRIGERANT COMPRESSOR, LOCATION - GF83.55-P-2100-01GH
Illustrated up to 31.08.01
The refrigerant compressor (A9) is flanged to the engine at front left
Fig. 98: Identifying Refrigerant Compressor

REFRIGERANT COMPRESSOR, FUNCTION - GF83.55-P-2100-02A
function2112GI
Ambient air temperature sensor, location/
purpose/function GF83.57-P-
2119GI
Outlet air temperature sensor, center nozzle,
location/purpose/function GF83.57-P-
2116GI
Outlet air temperature sensor, front footwell,
location/purpose/function GF83.57-P-
2117GI
Outlet air temperature sensor rear, location/
purpose/function GF83.57-P-
2118GI
Sun sensor, location/purpose/function GF83.57-P-
2111GI
Electric heater booster, location/purpose/
design/functionEngine 612.963GF83.70-P-
4054GH
Extended activity module, location/purpose/
design GF54.21-P-
4107GK
CDI control module,
location/purpose/function GF07.16-P-
3102IA
Table of contents, automatic air conditioning
(AAC) function description GF83.40-P-
0999GI

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:16 PMPage 120 © 2006 Mitchell Repair Information Company, LLC.

Cooling down
The thermostatic expansion valve located on the evaporator core serves to expand the liquid refrigerant which is
under high pressure thus lowering its pressure. After this the refrigerant evaporates. The evaporation heat
required for this is taken from the air flowing through the evaporator. The resulting cooled down air then
succeeds in entering the passenger compartment via the air ducts.
Reheat mode
The air which has been cooled down and dehumidified by the evaporator core is heated up again by the heat
exchanger (reheat). This serves to prevent the windows from misting up on the inside.
Temperature selector wheel, location/task/
design/function GF83.25-P-
2102GC
Heating system heat exchanger, location/
purpose/function GF83.20-P-
2108GC
Evaporator, location/purpose/design/function GF83.40-P-
2121GC
Expansion valve, location/task/design/function GF83.40-P-
2123GC
Refrigerant compressor, location/task/design/ function GF83.55-P-
2100GH
In-car temperature sensor, location/task/functionwith suction jet nozzle up to
30.11.99GF83.57-P-
2115GH
In-car temperature sensor with ventilation fan,
location/task/functionas of 01.12.99GF83.57-P-
2107GH
Defroster protection temperature sensor,
location/task/function GF83.57-P-
2113GH
Blending air flap actuator, location / task / function GF83.57-P-
2112GC
Outside temperature sensor, location/task/ functionas of 01.12.99GF83.57-P-
2110GH
Air conditioning control module, location/task/ function GF83.30-P-
2102GH
All Activity Module, location/task/function GF54.21-P-
4110GH
Electric heater booster position/task/design/ function Engine 612.963GF83.70-P-
4054GH
Temperature regulator microswitch, location/
task/function Engine 612.963GF83.70-P-
4055GH
Extended activity module, position/task GF54.21-P-
4106GH
Extended Activity Module, location/task/designas of 1.12.99GF54.21-P-
4107GK

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 138 © 2006 Mitchell Repair Information Company, LLC.

TEMPERATURE CONTROL, FUNCTION - GF83.57-P-2000GI
MODEL 163 as of 01.09.01 with CODE (580a) Automatic air conditioning
Function
The electronically controlled cooling, heating and ventilation system of the automatic air conditioning achieves
the desired in-car temperature as rapidly as possible or maintains it constantly.
The following options are available for this purpose:
the evaporator cooling the air
the heating system heat exchanger heating the air
Temperature control
The temperature values needed for the temperature control are determined by the in-car temperature sensors
(N22b1), center nozzle air stream (B10/24), footwell at front (B10/25), rear (B10/7), outside temperature
indicator (B14) and defroster protection (R35).
The electronics of the AAC push-button control module (N22) compare the various test values with the
temperature preselected at the temperature selector wheel.
As required, the automatic air conditioning performs the regulation in that in heating mode it controls the
position of the blending air flaps, via the blending air flap actuator motor (M2/6), or in cooling mode it actuates
the refrigerant compressor and thus keeps the respective setting constant.
CDI control module, location/task/function Engine 612.963GF07.16-P-
3102IA
Temperature selector wheel, location/task/ design/function GF83.25-P-
2102GI
Heating system heat exchanger, location/ purpose/function GF83.20-P-
2108GC
Evaporator, location/purpose/design/function GF83.40-P-
2121GC
Expansion valve, location/task/design/function GF83.40-P-
2123GC
Refrigerant compressor, location/task/design/ function GF83.55-P-2100P
Control valve, location/task/function GF83.55-P-2102P
In-car temperature sensor, location/task/function GF83.57-P-
2115GI
Center nozzle air stream temperature sensor,
location/task/function GF83.57-P-
2116GI
Front footwell air stream temperature sensor, GF83.57-P-

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 139 © 2006 Mitchell Repair Information Company, LLC.

IN-CAR TEMPERATURE SENSOR WITH ASPIRATOR BLOWER, LOCATION - GF83.57-P-2100-01GH
The in-car temperature sensor (B10/4) is located on the center console on the left next to the radio. The aspirator
blower (M9) associated with the in-car temperature sensor is located at the bottom left on the evaporator
housing.
Fig. 118: Identifying In
-Car Temperature Sensor
IN-CAR TEMPERATURE SENSOR WITH ASPIRATOR BLOWER FUNCTION - GF83.57-P-2100-02GH
Function
location/task/function2117GI
Rear air stream temperature sensor, location/ task/function GF83.57-P-
2118GI
Defroster protection temperature sensor, location/task/function GF83.57-P-
2113GH
Blending air flap actuator, location / task / function GF83.57-P-
2112GI
Outside temperature indicator temperature sensor,
location/task/function GF83.57-P-
2119GI
Sun sensor position/task/function GF83.57-P-
2111GI
Electric heater booster position/task/design/ function Engine
612.963GF83.70-P-
4054GH

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 140 © 2006 Mitchell Repair Information Company, LLC.

The in-car temperature sensor (B10/4) is equipped with an aspirator blower which constantly draws air out of
the vehicle interior for the temperature measurement when the ignition is ON . The in-car temperature sensor
(B10/4) records the interior temperature and conveys it to the AAC push-button control module. A comparison
is made there with the setting on the temperature selector and the blend air flap is repositioned depending on the
result of this comparison.
It is connected to the AAC push-button control module via a separate electric cable.
Constant circulation of the interior air at the in-car temperature sensor (B10/4) is achieved by the in-car
temperature sensor aspirator blower (M9) and therefore ensures a high level of control accuracy.
In contrast to the previous suction jet nozzle a high level of control accuracy is ensured by the in-car
temperature sensor aspirator blower (M9).
OUTSIDE AIR TEMPERATURE SENSOR FUNCTION - GF83.57-P-2103-01GH
Function
The resistance of the outside air temperature sensor (B10/5) depends on the ambient temperature and the ground
speed. With an increase in the outside temperature, its resistance decreases. This information is sent to the air
conditioning control module (N19). This information causes a slight lowering or raising of the temperature
selected at the air conditioning control panel.
This achieves an adaptation to the temperature perception of the occupants.
The outside temperature depends on the ground speed, which prevents a value for the outside temperature that is
too high - as may occur when the vehicle is stationary or when traveling slowly, e.g. due to thermal radiation
from the engine - from being sent to the air conditioning control module (N19).
The value of the ground speed is sent from the traction systems control module (N47) via the instrument cluster
(A1) to the air conditioning control module (N19).
When switching the ignition off and on and with speeds lower than 20 km/h the temperature measured last is
used.
OUTSIDE AIR TEMPERATURE SENSOR POSITION - GF83.57-P-2103-02GH
The outside air temperature sensor (B10/5) is located at the front on the air inlet of the evaporator housing.

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 141 © 2006 Mitchell Repair Information Company, LLC.

Fig. 119: Identifying Outsid e Air Temperature Sensor
BLENDING AIR ACTUATOR, LOCATION - GF83.57-P-2105-01GH
The blending air flap actuator motor (M16/8) is located at the top in the center on the evaporator housing.
Fig. 120: Identifying Blending Air Flap Actuator Motor

BLENDING AIR FLAP MOTOR FUNCTION - GF83.57-P-2105-02GH
Function
The blending air flap actuator motor (M16/8) is actu ated via the air conditioning control module depending on
the position of the temperature sel ector wheel in the air conditioning co ntrol panel and the actual in-car
temperature.

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 142 © 2006 Mitchell Repair Information Company, LLC.

The mechanical flaps are regulated by a linkage to the blending air flap actuator motor (M16/8). The flaps open
or close the passage of air through the heating system heat exchanger in order to mix heated air with cooled air
in the correct proportion necessary to achieve the desired in-car temperature.
The set point flap angle of the blending air flaps is determined by the air conditioning control module as a
function of the following information:
set point temperature selected at the temperature selector wheel
in-car temperature measured at the in-car temperature sensor (B10/4)
BLENDING AIR FLAP MOTOR FUNCTION - GF83.57-P-2105-02GI
Function
The blending air flap actuator motor (M2/6) is actuated via the AC bus and as a function of the position of the
temperature selector wheel in the AAC push-button control module (N22) and the actual in-car temperature.
The mechanical flaps are regulated by a linkage to the blending air flap actuator motor (M2/6). The flaps open
or close the passage of air through the heating system heat exchanger in order to mix heated air with cooled air
in the correct proportion necessary to achieve the desired in-car temperature.
The set point flap angle of the blending air flaps is determined by the AAC push-button control module (N22)
as a function of the following information:
set point temperature selected at the temperature selector wheel
in-car temperature measured at the in-car temperature sensor (N22b1)
temperatures of the air stream measured at the center nozzle air stream temperature sensors, footwell
forward and rear (B10/24, B10/25 and B10/7)
outside temperature measured by the outside temperature indicator temperature sensor (B14)
All actuators are identical.
If a problem exists, it is possible to retrieve and verify the defined end positions by means of the diagnosis
assistant system (DAS) (valuation trip).
After an actuator motor has been replaced, an adjustment run must be performed via the Diagnosis Assistant
System (DAS), i.e. the end positions flap OPEN and SHUT are defined and retained.
ICING PROTECTION TEMPERATURE SENSOR, LOCATION - GF83.57-P-2106-01GH
The icing protection temperature sensor (R35) is located at the center rear of the evaporator housing.

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 143 © 2006 Mitchell Repair Information Company, LLC.

Fig. 121: Identifying Icing Protection Temperature Sensor
ICING PROTECTION TEMPERATURE SENSOR, FUNCTION - GF83.57-P-2106-02GH
Function
The icing protection temperature sensor (R35) is located in the air flow behind the evaporator. It sends its
resistance value depending upon the temperature at the evaporator to the air conditioning control panel (S98) or
AAC push-button control module (N22).
At an evaporator temperature of 1 to 3°C the refrigerant compressor is switched off. This helps to prevent the
evaporator from icing up. As a result the outlet temperature fluctuates insignificantly at the nozzles.
IN-CAR TEMPERATURE SENSOR WITH ASPIRATOR BLOWER, LOCATION/TASK/FUNCTION - GF83.57-P-2107GH
MODEL 163 as of 1.12.99 up to 31.8.01
OUTSIDE TEMPERATURE SENSOR, LOCATION/TASK/FUNCTION - GF83.57-P-2110GH
MODEL 163 as of 1.12.99 up to 31.8.01 with code (580) Air conditioning or Tempmatic for USA

In-car temperature sensor
with aspirator blower,
location
GF83.57-P-
2100-01GH
In-car temperature sensor
with aspirator blower, task
The in-car temperature sensor (B10/4) with aspirator blower
(M9) records all the in-car temperatures and sends them to
the air conditioning control module.
The aspirator blower (M9) then uses air from the passenger
compartment to supply a constant flow of air to the in-car
temperature sensor (B10/4).


In-car temperature sensor
with aspirator blower
function
GF83.57-P-
2100-02GH
Outside temperature
sensor position GF83.57-P-
2103-02GH

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 144 © 2006 Mitchell Repair Information Company, LLC.

SUN SENSOR POSITION/TASK/FUNCTION - GF83.57-P-2111GI
MODEL 163 as of 1.9.01 with CODE (580a) Automatic air conditioning
Fig. 122: Identifying Sun Sensor

BLENDING AIR FLAP ACTUATOR MOTOR, LOCATION/TASK/FUNCTION - GF83.57-P-2112GC
MODEL 163 up to 31.8.01, 168 with code (580) Air conditioning or Tempmatic for USA
Outside temperature
sensor, taskThe outside temperature sensor (B10/5) records all the outside
temperature and sends it to the air conditioning control module
(N19).

Outside temperature
sensor function GF83.57-P-
2103-01GH
Sun sensor,
locationThe sun sensor (B32) is located behind the instrument cluster in the instrument panel.
Sun sensor,
taskThe sun sensor (B32) measures the intensity and direction of the solar radiation.
Sun sensor,
functionThe sun sensor (B32) records the intensity and angle of incidence of the solar radiation
onto the vehicle. This makes it possible, dependent on the solar radiation intensity
(brightness) the in-car temperature and the blower speed to be automatically adjusted.

Blending air flap GF83.57-P-

2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Saturday, October 02, 2010 3:23:17 PMPage 145 © 2006 Mitchell Repair Information Company, LLC.