turn signal bulb MERCEDES-BENZ R350 2006 W251 Owner's Manual

446 Practical hintsWhat to do if …Display symbol
Display messages
Possible cause/consequence
Possible solution
.
Tail lamp, left
Substitute bulb on
The left tail lamp is malfunction-
ing. A substitute bulb is being
used.

Replace the bulb as soon as possible.
Tail lamp, right
Substitute bulb on
The right tail lamp is malfunc-
tioning. A substitute bulb is
being used.

Replace the bulb as soon as possible.
Turn signal, rear left
Substitute bulb on
The left rear turn signal lamp is
malfunctioning. A substitute
bulb is being used.

Replace the bulb as soon as possible.
Turn signal, rear right
Substitute bulb on
The right rear turn signal lamp is
malfunctioning. A substitute
bulb is being used.

Replace the bulb as soon as possible.
Turn signal, front left
Substitute bulb on
The left front turn signal lamp is
malfunctioning. A substitute
bulb is being used.

Replace the bulb as soon as possible.
Turn signal, front right
Substitute bulb on
The right front turn signal lamp is
malfunctioning. A substitute
bulb is being used.

Replace the bulb as soon as possible.

465 Practical hints
Replacing bulbs
Replacing bulbs
Bulbs
Safe vehicle operation depends on proper
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp as-
semblies are in good working order at all
times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. See an authorized
Mercedes-Benz Light Truck Center for
headlamp adjustment.
iIf the headlamps or front fog lamps are
fogged up on the inside as a result of
high humidity, driving the vehicle a dis-
tance with the lights on should clear up
the fogging.
iBackup bulbs will be brought into use
when the following lamps malfunction:

Turn signal lamps


Brake lamps


Parking lamps


Tail lamps
Read and observe messages in the
multifunction display (
page 442).

466 Practical hintsReplacing bulbsFront lamps Rear lamps
Lamp
Type
1
Parking/standing lamp
W 5 W
2
Turn signal lamp
PY 21 W
3
Additional turn signal
lamp
LED
4
Headlamps:
Low beam
H7 (55W)
Bi-Xenon headlamps*:
Low beam
1
1Vehicles with Bi-Xenon* headlamps: Do not
replace the Bi-Xenon bulbs yourself. Contact an
authorized Mercedes-Benz Light Truck Center.
D2S-35 W
5
Headlamps:
High beam/high beam
flasher
H7 (55W)
Bi-Xenon headlamps*:
High beam/high beam
flasher spot lamp
H7 (55W)
6
Sidemarker lamp
WY 5 W
7
Corner-illuminating
front fog lamp*
H11 (55W)
Lamp
Type
8
High-mounted brake
lamp
LED
9
Tail, brake, and
sidemarker lamp
P 21 W
a
Turn signal lamp
PY 21 W
b
Backup lamp
P 21 W
c
Rear fog lamp (driver’s
side only)
P 21 W
d
License plate lamps
C 5 W

467 Practical hints
Replacing bulbs
Notes on bulb replacement

Only use 12-volt bulbs of the same type
and with the specified watt rating.


Switch the lights off before changing a
bulb to prevent short circuits.


Always use a clean lint-free cloth when
handling bulbs.


Your hands should be dry and free of oil
and grease.


If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Light Truck Center.Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Light Truck Center:


the additional turn signal lamps in the
exterior rear view mirrors


the high mounted brake lamp


the Bi-Xenon* low beam lamps


the Bi-Xenon high beam flasher spot-
light*


the front sidemarker lamps
Warning!
G
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before chang-
ing a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you:

touch or move it when hot


drop the bulb


scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.

468 Practical hintsReplacing bulbsReplacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 147).

Open the hood (
page 345).
Halogen headlamps
1Low beam/high beam headlamp cover2Bulb socket for turn signal lamp
2Bulb socket for turn signal lamp
3Bulb socket for low beam headlamp
4Bulb socket for high beam headlampLow beam headlamp bulbs

Turn cover 1 counterclockwise.

Remove cover 1.

Turn bulb socket 3 counterclockwise.

Pull bulb socket 3 out of the head-
lamp housing.

Pull the low beam bulb out of bulb
socket 3.

Insert the new low beam bulb into bulb
socket 3.

Insert bulb socket 3 into the head-
lamp housing.

Turn bulb socket 3 clockwise until it
engages.

Place cover 1 on the opening in the
headlamp housing.

Turn cover 1 clockwise until it engag-
es.

469 Practical hints
Replacing bulbs
High beam headlamp bulbs
Turn cover 1 counterclockwise.

Remove cover 1.

Turn bulb socket 4 counterclockwise.

Pull bulb socket 4 out of the head-
lamp housing.

Pull the high beam bulb out of bulb
socket 4.

Insert the new high beam bulb into bulb
socket 4.

Insert bulb socket 4 into the head-
lamp housing.

Turn bulb socket 4 clockwise until it
engages.

Place cover 1 on the opening in the
headlamp housing.

Turn cover 1 clockwise until it engag-
es.Front turn signal lamp bulbs

Pull bulb socket 2 out of the head-
lamp housing.

Pull the turn signal bulb out of bulb
socket 2.

Insert the new turn signal bulb into bulb
socket 2.

Insert bulb socket 2 into the head-
lamp housing.Bi-Xenon headlamps*
1Bulb socket for turn signal lamp
2Low beam/high beam headlamp cover
– Do not remove
1Bulb socket for turn signal lamp

470 Practical hintsReplacing bulbsLow beam and high beam flasher spot
bulbsFront turn signal lamp bulbs

Pull bulb socket 1 out of the head-
lamp housing.

Pull the turn signal bulb out of bulb
socket 1.

Insert the new turn signal bulb into bulb
socket 1.

Insert bulb socket 1 into the head-
lamp housing.Parking and standing lamp bulbs
1Bulb socket for parking and standing
lamp

Turn bulb socket 1 counterclockwise.

Pull bulb socket 1 out of the housing.

Pull the bulb out of bulb socket 1.

Insert the new parking and standing
lamp bulb into bulb socket 1.

Insert bulb socket 1 into the housing.

Turn bulb socket 1 clockwise until it
engages.
Warning!
G
Do not remove the low beam/high beam
cover for the Bi-Xenon* headlamp. Because
of high voltage in Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.

472 Practical hintsReplacing bulbs
Turn bulb socket 5 clockwise until it
engages.

Insert corner-illuminating front fog
lamp 1 back into bumper.

Fasten retaining screws4.

Reinsert cover 2 and press it in until it
engages.

Fasten retaining screw3.Additional turn signal lamps bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Light
Truck Center.
Front sidemarker lamp bulbs
Since replacing the sidemarker lamp bulbs
is a technically highly demanding process,
we recommend you have the sidemarker
lamp bulbs replaced by an authorized
Mercedes-Benz Light Truck Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the combination switch to
positionM (
page 147).
Tail lamp unit

Open the tailgate (
page 122).
iTo access the tail lamp units, you have
to remove the cover in the correspond-
ing side trim panel of the cargo com-
partment.


473 Practical hints
Replacing bulbs
Opening the side trim panels
1Lock
2Cover in left side trim panel
1Lock
2Cover in right side trim panel

Insert a suitable object such as a coin
into the slot of lock1.

Turn lock1 clockwise (left side trim
panel) or counterclockwise (right side
trim panel) by 90° in direction of arrow.

Remove cover2.
Replacing bulbs
1Tail, sidemarker, standing, and parking
lamp bulb socket
2Turn signal lamp bulb socket
3Fog lamp bulb socket
(driver’s side only)
4Backup lamp bulb socket

Depending on which bulb needs to be
replaced, turn the respective bulb
socket 1 - 4 counterclockwise.

Pull the bulb socket out of the housing.

Similarly turn the bulb counterclock-
wise carefully and pull the bulb out of
bulb socket.

Insert the new bulb into the bulb sock-
et.

Turn the bulb in the bulb socket clock-
wise carefully.

Insert the bulb socket into the housing.

Turn the bulb socket clockwise until it
engages.

535 Index
A
ABS 97, 529
ABS control 97
Malfunction indicator lamp 404
Messages in display 418
Warning lamp 404
Accelerator position, automatic
transmission 203
Accessory weight 385, 529
Accident
In case of 63
Activating
Air circulation mode 242
Air conditioning (cooling) 226
Air recirculation mode 225, 239
Anti-theft alarm system 105
Central locking (control system) 188
Defrosting 223
Easy-entry/exit feature* 189
Electric air pump 483
ESP
®
102
Exterior headlamps 58
Hazard warning flasher 154
Headlamps 58
High beams 151
Ignition 38Immobilizer 66, 104
Rear window defroster 215
Rear window wiper 62
Residual heat 243
Residual heat* 228
Seat heating* 142
Tow-away alarm 107
Warning indicators (Parktronic*) 276
Windshield wipers 59
Adding
Coolant 351
Engine oil 349
Additional turn signal lamps
Replacing bulbs 466
Adjusting 42
Air distribution 222, 236
Air volume 222, 237
Backrest tilt 44
Exterior rear view mirror 48
Head restraint height 44
Head restraint tilt 45
Instrument cluster illumination 158
Interior rear view mirror 48
Mirrors 47
Multicontour seat* 136
Seat cushion depth 136Seat cushion tilt 44
Seat fore and aft adjustment 43
Seat height 44
Seats 42
Steering column height 47
Steering wheel 45
Adjusting steering column in or out 47
Adjusting steering column up or down 47
Air bags 71
Children 72
Front 75
Passenger 75
Safety guidelines 74
Side impact 76
Window curtain 76
Air conditioning
Turning off 226
Turning on 226
Air conditioning refrigerant 523
Air distribution
Adjusting 222, 236
Air pressure 385, 529
Air pressure see Tire inflation pressure
Air pump, electric
Turning on 483