MERCEDES-BENZ S-Class 2005 W220 Comand Manual

109 Telephone*
Telephone operation
Saving a phone book entry on the tele-
phone
Use button g or G to select a pho-
ne book entry.

Press the
Save
softkey.
The message Transmitting Data
to Telephone will appear.
If transmission is succesful, the mes-
sage
Data Has Been Saved
will ap-
pear.You can save phone numbers

in the internal memory of the mobile
phone

in the address book.

Open one of the lists:
Dialed numbers list (
page 100)

Received calls list (
page 101)

Use g or G to select an entry.

Press the
Save
softkey.
A selection menu appears.Saving a single phone number on the
telephone

Press E to confirm
Cell Phone
.
An input menu will appear. The
Number

field contains the phone number to be
saved.
iIf you select a phone book entry from
the internal memory, the
Save
soft key
is greyed out.
If a phone book entry contains several
numbers (address book entry), they are
transferred together.
Saving phone numbers

110 Telephone*Telephone operation
Enter a name in the
Surname
field:
You can input data:

using the selection menu by
pressing the
Keypad
soft key
(
page 193)

via the number keys 1 - #
(page 195)Finishing data input and saving the phone
number:
Input via selection menu:

Press the
OK
soft key.
Input via 12-button keypad:

Press E.
The message
Transmitting Data
to Telephone is displayed.
If the transfer was successful, the mes-
sage
Data Has Been Saved
will ap-
pear and the list is displayed again.
Otherwise the message
Error
Occured While Saving Data
will
appear.

Press E to confirm.
The list is displayed again.Saving in the address book

In the selection menu (
page 109),
use G to select
Address book
.

Press E.
A selection menu will appear.
Saving as a new entry

Press E to confirm
New Entry
.
Another selection menu will appear.

111 Telephone*
Telephone operation

Use g or G to select the phone
number type.

Press E.
An input menu will appear.

You can input data:
using the selection menu by
pressing the
Keypad
soft key
(
page 193)

via the number keys 1 - #
(page 195)
Finishing data input and saving:

Press E or the
OK
soft key
.
If the transfer was successful, the

message
Data Has Been Saved
will
appear and the list is displayed again.Adding to an existing entry

In the selection menu (
page 110),
use G to select
Addition.

Press E.
The phone book will appear.

Select the phone book entry
(page 105).

Press E.
A selection menu will appear.

112 Telephone*Telephone operation
Use g or G to select the phone
number type.

Press E.
Phone number type available:
The message
Data Has Been Saved

will appear. After around three se-
conds, the list from where you started
the saving process will appear.Phone number type occupied:
The message
Do You Want to Over-
write Entry? will appear.

Press E if you wish to overwrite the
entry.
The message
Data Has Been Saved

will appear. After around three se-
conds, the list from where you started
the saving process will appear.
If you do not wish to overwrite the entry

Press h to highlight
No
if you do not
wish to overwrite the entry.

Press E.
The list from where you started the sto-
rage will appear.
iIf transmission is not succesful the
message
Error Occured While
Saving Data
will appear.

Press E to confirm.
The phone book is displayed again.

113 Navigation
Important notes
Navigation main menu
Destination input
Route guidance
During route guidance
Last destinations and destination memory
POIs
Software updates

114 NavigationImportant notes

Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
only by qualified personnel.

115 Navigation
Important notes
COMAND calculates the route with the
help of data that is stored on the navigati-
on DVD.
Only use Mercedes-Benz navigation DVDs.
Using other navigation DVDs or CDs will
cause malfunctions and/or damage.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.Loading/ejecting a DVD
DVDs are loaded and ejected at the
navigation computer. The navigation
computer is located on the left side in the
trunk.
Open panel cover to get access to the
navigation computer. 1Ejecting DVDs
2DVD slot
Ejecting

Press l.
The navigation computer ejects the
DVD.
Navigation DVDiThe message
No DVD Available
Please Insert Navigation DVD

will appear if no DVD is currently
loaded in the navigation computer.
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

if the reception of GPS signals is
disturbed e.g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s conditi-
on
iIf you do not remove the DVD from
the slot within around 15 seconds, the
COMAND will pull the DVD into the
drive.

116 NavigationImportant notesLoading
Insert the DVD into the DVD slot 2
with the label side up.
The navigation computer pulls the DVD
in.
If your vehicle has been transported (e.g.
by a car, train or ferry) the system may
make navigation announcements which do
not correspond to the vehicle’s position.
The system needs to redetermine its
position.Determining the location after the
vehicle has been transported
The system will need some time to
determine its location after the car has
been transported. The time required for
the system to do so varies from case to
case.

Switch the COMAND on.

Activate the Navigation main menu
(page 118).
The navigation DVD needs to be in the
navigation computer (
page 115).

Drive and press c.
The display will change to the map
display.Drive until the position or the road
indicated correspond to the real
circumstances. The system is now
correctly adjusted.
Route guidance after the vehicle has
been transported

117 Navigation
Important notes
The following applies if you interrupt your
trip and continue later on:
Trip is continued within 2 hours:
The system will automatically resume
route guidance.

Trip is continued after more than
2 hours: 
Press E to confirm
Continue
Route Guidance in the
Navigation main menu
(
page 118).
Trip interruption during route
guidanceiTrip interruption means the vehicle is
parked and COMAND is switched off.
Trip continuation means the vehicle is
moving and COMAND is switched on
again.

118 NavigationNavigation main menu

Navigation main menu
Press b.
The Navigation main menu will appear.

Use G or g to select a menu item.

Press E.
or

Press one of the soft keys. Available
soft keys (
page 119).
The selected menu or the function of
the selected soft key appears.Selectable Menu Items

Continue Route Guidance
:
Resumes interrupted or aborted route
guidance.
Activating the Navigation main
menu iIf a navigation submenu is displayed,
you need to press the button twice.
iIf route guidance is active, a message
appears instead asking you whether
you wish to resume route guidance
(page 143).
If route guidance has been interrupted
for more than 2 hours, the entry
Continue Route Guidance
will be
on top of the list.
iThis menu item appears if you:
have aborted route guidance
(page 143) and less than 30
minutes have elapsed since the
guidance process was aborted

have interrupted your journey and
continue it after more than 2 hours