Page 44 MERCEDES-BENZ S-Class 2005 W220 Comand Manual

104 Telephone*Telephone operationThe phone book contains all entries
of the internal memory of the mobile
phone (TDMA/CDMA and GSM mobile
phone)

of the address book (
page 176) if it
contains any telephone numbers
Displaying the phone book

In the Telephone menu (
page 96),
press the Z soft key.
The phone book will appear.The first entry found is at the top of the list
and highlighted. All entries are marked with symbols which
indicate the phone number category.
Usable phone number categories:

Symbol : Cell number

Symbol : Private number

Symbol : Business number
And additional categories:

Symbol : Fax number

Symbol : Pager number

Symbol : Main number

Symbol : E-mail address
Phone bookiGSM mobile phone:
COMAND also reads entries from SIM
card.
Phone book
entry
Status bar shows
A phone number
Unknown
Name
A name for a
phone number
The phone number
Several numbers
Several
Numbers
iAddress book entries with more than
one phone number are marked with the
Main number symbol.

105 Telephone*
Telephone operation
You can select the following functions:
Changing the phone book display at
the COMAND

Selecting a phone book entry and
dialing the number (
page 105)

Entering and saving a new phone book
entry* (
page 106)

Deleting a phone book entry
(page 108)
Changing the phone book display

Open the phone book (
page 104).

Press the
123
soft key.
The display changes to numbers. The
status bar displays the name of the
marked entry.
or

Press the
ABC
soft key.
The display changes to names. The
status bar displays the number of the
marked entry.Selecting a phone book entry and
dialing the number

Open the phone book (
page 104).
The list of phone book entries with
names starting with a certain letter is
displayed.
Changing the initial letters
With Handh

Press H or h one or several times.
With every push of the button the
display changes to the next possible
letter. At the end of the letter list
follows the category
Other
.
Category
Other
:
Here, all entries without names or with
names starting with a special character
(e.g. * or #) are put together.With the number keys
The number keys are labelled with the let-
ters which can be selected.

Press, e.g. 4.
The system displays a window above
the status bar which shows the letters G, H and
I. After that, the address book
list with the letter
G is displayed.

To select, e.g. the letter
H, press 4
twice in quick succession.
Selecting an entry

Change the initial letter if required.

Use G or g to select a list entry.
iIf you hold one of the buttons, scrolling
is accelerated.
iIf you hold one of the buttons, scrolling
is accelerated.

106 Telephone*Telephone operationBegin dialing
Press k.
or

Press E.
If the selected entry is an address book
entry (several phone numbers): 
Use g or G to select
Cell
,
Work
or
Home
.
If the selected entry is a cell phone
entry (several phone numbers):

Use g or G to select one of the
phone number categories,
e.g. (
page 104).

Press k.
or

Press E.
The telephone dials the number.New phone book entry
You can create new phone book entries as
entries

in the internal memory of the mobile
phone
or

in the address book.

Press the
New
soft key in the phone
book.
A selection menu appears.
Cell Phone
:
The new entry is saved in the internal
memory of the mobile phone.
Address Book
:
The new entry is saved in the address
book.

Use g or G to select
Cell Phone

or
Address Book
.

Press E.Cell Phone
:
An input menu (page 107) appears.
Address Book:A selection menu appears.

107 Telephone*
Telephone operation

Use g or G to select
Home
, Cell
or
Work
.

Press E.
An input menu appears.
Input menu
The Surname field is automatically
marked.Entering a surname, name or number

Use g or G to select the name or
the number field.
You can input data:
using the selection menu

via the number keys 1 - #
Using the selection menu:

Press the
Keypad
soft key.
The selection menu appears.
Selection menu

Enter the data using the selection
menu (
page 193).
After input using the selection menu,
the input menu is displayed again. You
can select the next data field and enter
data.
Input via the number keys 1 - #:

Use buttons 1 - # to enter the data
(page 195).
iIf you have select the
Cell Phone

entry, the input menu displays the
surname and number field.

108 Telephone*Telephone operationSaving the entry
In the Input menu, press the
OK
soft
key.
If you have not assigned a name, the
system will save the entry in the Other

category, otherwise under the name
you have assigned.
Cell PhoneThe message
Transmitting Data

to Telephone
is displayed.
If transmission is succesful, the
message
Data Has Been Saved
will
appear and the phone book is
displayed again.
Otherwise the message
Error
Occured While Saving Data
will
appear.

Press E to confirm.
The phone book is displayed again.
Address BookIf transmission is succesful, the
message
Data Has Been Saved
will
appear and the phone book is
displayed again.
Otherwise the message
Error
Occured While Saving Data
will
appear.

Press E to confirm.
The phone book is displayed again.Deleting a phone book entry

Select a phone book entry at the
COMAND (
page 104).

Press the
Delete
soft key.
The delete dialogue will appear.

Press E to confirm with
Yes
.
The message is deleted.
If you do not wish to delete the message

Press h to highlight
No
and then
press E.
or

Press the
Back
soft key.
iIf you select an address book entry, the Delete
soft key is greyed out. The
selected entry must be deleted from
within the address book (
page 186).

109 Telephone*
Telephone operation
Saving a phone book entry on the tele-
phone
Use button g or G to select a pho-
ne book entry.

Press the
Save
softkey.
The message Transmitting Data
to Telephone will appear.
If transmission is succesful, the mes-
sage
Data Has Been Saved
will ap-
pear.You can save phone numbers

in the internal memory of the mobile
phone

in the address book.

Open one of the lists:
Dialed numbers list (
page 100)

Received calls list (
page 101)

Use g or G to select an entry.

Press the
Save
softkey.
A selection menu appears.Saving a single phone number on the
telephone

Press E to confirm
Cell Phone
.
An input menu will appear. The
Number

field contains the phone number to be
saved.
iIf you select a phone book entry from
the internal memory, the
Save
soft key
is greyed out.
If a phone book entry contains several
numbers (address book entry), they are
transferred together.
Saving phone numbers

110 Telephone*Telephone operation
Enter a name in the
Surname
field:
You can input data:

using the selection menu by
pressing the
Keypad
soft key
(
page 193)

via the number keys 1 - #
(page 195)Finishing data input and saving the phone
number:
Input via selection menu:

Press the
OK
soft key.
Input via 12-button keypad:

Press E.
The message
Transmitting Data
to Telephone is displayed.
If the transfer was successful, the mes-
sage
Data Has Been Saved
will ap-
pear and the list is displayed again.
Otherwise the message
Error
Occured While Saving Data
will
appear.

Press E to confirm.
The list is displayed again.Saving in the address book

In the selection menu (
page 109),
use G to select
Address book
.

Press E.
A selection menu will appear.
Saving as a new entry

Press E to confirm
New Entry
.
Another selection menu will appear.

111 Telephone*
Telephone operation

Use g or G to select the phone
number type.

Press E.
An input menu will appear.

You can input data:
using the selection menu by
pressing the
Keypad
soft key
(
page 193)

via the number keys 1 - #
(page 195)
Finishing data input and saving:

Press E or the
OK
soft key
.
If the transfer was successful, the

message
Data Has Been Saved
will
appear and the list is displayed again.Adding to an existing entry

In the selection menu (
page 110),
use G to select
Addition.

Press E.
The phone book will appear.

Select the phone book entry
(page 105).

Press E.
A selection menu will appear.

116 NavigationImportant notesLoading
Insert the DVD into the DVD slot 2
with the label side up.
The navigation computer pulls the DVD
in.
If your vehicle has been transported (e.g.
by a car, train or ferry) the system may
make navigation announcements which do
not correspond to the vehicle’s position.
The system needs to redetermine its
position.Determining the location after the
vehicle has been transported
The system will need some time to
determine its location after the car has
been transported. The time required for
the system to do so varies from case to
case.

Switch the COMAND on.

Activate the Navigation main menu
(page 118).
The navigation DVD needs to be in the
navigation computer (
page 115).

Drive and press c.
The display will change to the map
display.Drive until the position or the road
indicated correspond to the real
circumstances. The system is now
correctly adjusted.
Route guidance after the vehicle has
been transported

117 Navigation
Important notes
The following applies if you interrupt your
trip and continue later on:
Trip is continued within 2 hours:
The system will automatically resume
route guidance.

Trip is continued after more than
2 hours: 
Press E to confirm
Continue
Route Guidance in the
Navigation main menu
(
page 118).
Trip interruption during route
guidanceiTrip interruption means the vehicle is
parked and COMAND is switched off.
Trip continuation means the vehicle is
moving and COMAND is switched on
again.