Vehicle MERCEDES-BENZ S-Class 2008 W221 Comand Manual

748 Technical dataIdentification labels1Certification label (on driver’s B-pillar)
The V
ehicle I
dentification N
umber (VIN)
can be found in the following locations:


on the certification label


embossed underneath a cover in the
rear center armrest


on the lower edge of the windshield
Example certification label (U.S. vehicles)2VIN
3Paintwork code
Example certification label
(Canada vehicles)2VIN
3Paintwork codei
Data shown on certification label are for il-
lustration purposes only. These data are specific
to each vehicle and may vary from data shown in
the illustration. Refer to certification label on ve-
hicle for actual data specific to your vehicle.

749 Technical data
Identification labels
4VIN
Fold down rear center armrest.
VIN 4 is underneath a cover in the
center armrest.
Example illustration
(all models except S 63 AMG and
S65AMG)5Engine number (engraved on engine)
6VIN (lower edge of windshield)
7Emission control information label,
includes both federal and California
certification exhaust emission
standards
S 63 AMG and S 65 AMG5Engine number (engraved on engine)
6VIN (lower edge of windshield)
7Emission control information label,
includes both federal and California
certification exhaust emission
standards
i
When ordering parts, please specify vehicle
identification and engine numbers.

750 Technical dataLayout of poly-V-belt driveS 450 4MATIC
1, S 550 and
S 550 4MATIC
1Idler pulley
2Idler pulley
3Automatic belt tensioner
4Pump for power-steering assistance
Vehicles with ABC*: ABC* tandem
pump (pump for power-steering assis-
tance and ABC* chassis)
5Air conditioning compressor
6Crankshaft
7Coolant pump
8Generator (alternator)
S63 AMG
1Idler pulley
2Idler pulley
3Idler pulley
4Automatic belt tensioner
5Pump for power-steering assistance
6Air conditioning compressor
7Crankshaft
8Coolant pump
9Generator (alternator)
S 600 and S 65 AMG
1Automatic belt tensioner
2ABC tandem pump (pump for
power-steering assistance and ABC
chassis)
3Air conditioning compressor
4Crankshaft
5Coolant pump
6Generator (alternator)
7Idler pulley
8Idler pulley
9Idler pulley
1Canada only

751 Technical data
Engine
Engine
Model
S 450 4MATIC (221.184)
1,2
1The quoted data apply only to the standard vehicle. Contact an authorized Mercedes-Benz Center for the corresponding data of all special bodies and special equip-
ment.2Canada only
S 550 (221.171)
1
Engine
273
273
Mode of operation
4-stroke engine, gasoline injection
4-stroke engine, gasoline injection
No. of cylinders
8
8
Bore
3.66 in (92.90 mm)
3.86 in (98.00 mm)
Stroke
3.39 in (86.00 mm)
3.56 in (90.50 mm)
Total piston displacement
284.6 cu in (4 663 cm
3)
333.3 cu in (5 461 cm
3)
Compression ratio
10.5:1
10.7:1
Output acc. to SAE J 1349
3
3Premium fuel required. Performance may vary with fuel octane rating.
335 hp/6 000 rpm
(250 kW/6 000 rpm)
382 hp/6 000 rpm
(285 kW/6 000 rpm)
Maximum torque
acc. to SAE J 1349
391 lb-ft/2 700 - 5 000 rpm
(460 Nm/2 700 - 5 000 rpm)
391 lb-ft/3 000 rpm
(530 Nm/3 000 rpm)
Maximum engine speed
6 500 rpm
6500 rpm
Firing order
1-5-4-2-6-3-7-8
1-5-4-2-6-3-7-8
Poly-V-belt
2 404 mm
2404 mm

752 Technical dataEngineModel
S 550 4MATIC (221.186)
1
S 600 (221.176)
1
1The quoted data apply only to the standard vehicle. Contact an authorized Mercedes-Benz Center for the corresponding data of all special bodies and special equip-
ment.Engine
273
275
Mode of operation
4-stroke engine, gasoline injection
4-stroke engine, gasoline injection
No. of cylinders
8
12
Bore
3.86 in (98.00 mm)
3.23 in (82.00 mm)
Stroke
3.56 in (90.50 mm)
3.43 in (87.00 mm)
Total piston displacement
333.3 cu in (5 461 cm
3)
336.4 cu in (5 513 cm
3)
Compression ratio
10.5:1
9:1
Output acc. to SAE J 1349
2
2Premium fuel required. Performance may vary with fuel octane rating.
382 hp/6 000 rpm
(285 kW/6 000 rpm)
510 hp/5 000 rpm
(380 kW/5 000 rpm)
Maximum torque
acc. to SAE J 1349
391lb-ft/2800-4800rpm
(530 Nm/2 800 - 4 800 rpm)
612 lb-ft/1 800 - 3 500 rpm
(830 Nm/1 800 - 3 500 rpm)
Maximum engine speed
6500 rpm
5 950 rpm
Firing order
1-5-4-2-6-3-7-8
1-12-5-8-3-10-6-7-2-11-4-9
Poly-V-belt
2404 mm
2 370 mm

753 Technical data
Engine
Model
S 63 AMG (221.077)
1
S 65 AMG (221.179)
1
1The quoted data apply only to the standard vehicle. Contact an authorized Mercedes-Benz Center for the corresponding data of all special bodies and special equip-
ment.Engine
156
275
Mode of operation
4-stroke engine, gasoline injection
4-stroke engine, gasoline injection
No. of cylinders
8
12
Bore
4.02 in (102.20 mm)
3.25 in (82.60 mm)
Stroke
3.72 in (94.60 mm)
3.66 in (93.00 mm)
Total piston displacement
378.8 cu in (6 208 cm
3)
364.9 cu in (5 980 cm
3)
Compression ratio
11.3:1
9:1
Output acc. to SAE J 1349
2
2Premium fuel required. Performance may vary with fuel octane rating.
518 hp/6 800 rpm
(386 kW/6 800 rpm)
603 hp/4 800 - 5 100 rpm
(450 kW/4 800 - 5 100 rpm)
Maximum torque
acc. to SAE J 1349
465 lb-ft/5 200 rpm
(630 Nm/5 200 rpm)
738 lb-ft/2 000 - 4 000 rpm
(1 000 Nm/2 000 - 4 000 rpm)
Maximum engine speed
7 200 rpm
5950 rpm
Firing order
1-5-4-2-6-3-7-8
1-12-5-8-3-10-6-7-2-11-4-9
Poly-V-belt
2360 mm
2370 mm

754 Technical dataRims and tires!
Only use tires which have been tested and
approved by Mercedes-Benz. Tires approved by
Mercedes-Benz are developed to provide best
possible performance in conjunction with the
driving safety systems on your vehicle such as
ABS or ESP
®. Tires specially developed for your
vehicle and tested and approved by
Mercedes-Benz can be identified by finding the
following on the tire’s sidewall:


MO = M
ercedes-Benz O
riginal equipment
tires
AMG vehicles:
Does not apply to all approved tires on AMG
vehicles. For information on tested and
approved tires for AMG vehicles, contact an
authorized Mercedes-Benz Center.
Using tires other than those approved by
Mercedes-Benz may result in damage that is not
covered by the Mercedes-Benz Limited
Warranty.
!
Using tires other than those approved by
Mercedes-Benz can have detrimental effects,
such as


poor handling characteristics


increased noise


increased fuel consumption
Moreover, tires and rims not approved by
Mercedes-Benz may, under load, exhibit dimen-
sional variations and different tire deformation
characteristics that could cause them to come
into contact with the vehicle body or axle parts.
Damage to the tires or the vehicle may be the
result.
i
Further information on tires and rims is
available at any authorized Mercedes-Benz
Center. A placard with the recommended tire in-
flation pressures is located on the driver’s door
B-pillar (
page 585). Some vehicles may have
supplemental tire inflation pressure information
for driving at high speeds (
page 591) or for ve-
hicle loads less than the maximum loaded
vehicle condition (
page 598). If such informa-
tion is provided, it can be found on the placard lo-
cated on the inside of the fuel filler flap. The tire inflation pressure should be checked
regularly and should only be adjusted on cold
tires. Follow tire manufacturer’s maintenance
recommendation included with vehicle.
i
The following pages also list the approved
wheel rim and tire sizes for equipping your vehi-
cles with winter tires. Winter tires are not avail-
able as standard or optional factory equipment,
but can be purchased from an authorized
Mercedes-Benz Center.
Depending on vehicle model and the standard or
optional factory-equipped wheel rim/tire config-
uration on your vehicle (Appearance Package,
Sport Package etc.), equipping your vehicle with
winter tires approved for your vehicle model may
also require the purchase of two or four wheel
rims of the recommended size for use with these
winter tires. Contact an authorized
Mercedes-Benz Center for more information.

759 Technical data
Rims and tires
Spare wheelModel
S 450 4MATIC
S 550
S 550 4MATIC
S 600
S 550 (Sport Package*)
S 600 (Sport Package*)
S63AMG
S 63 AMG (Performance Package*)
S65AMG
Rim (steel)
4.5 B x 19 H2
4.5 B x 19 H2
–
Rim (light alloy)
–
–
4.5 B x 19 H2
Wheel offset
1.38 in (35 mm)
1.38 in (35 mm)
1.38 in (35 mm)
Minispare tire
1
1Must not be used with snow chains.
T 155/70 R19 113M
T 155/70 R19 113M
T 155/70 R19 113M
Recommended tire inflation pressure
61 psi (4.2 bar)
61 psi (4.2 bar)
61 psi (4.2 bar)
!
Please compare the recommended tire
inflation pressure for your vehicle with the tire
inflation pressure on the yellow label located on
the spare wheel rim.
If the tire inflation pressure on the yellow label
on the spare wheel rim differs from the values
given in this Operator’s Manual, inflate the spare
wheel tire to the recommended tire inflation
pressure given on the yellow label on the spare
wheel rim.
i
Please note that the tire inflation pressure of
the spare tire differs from the tire inflation pres-
sure of the road tires.

762 Technical dataMain dimensions and weightsMain dimensionsModel
S 450 4MATIC (221.184)
1
S 550 (221.171)
S 550 4MATIC (221.186)
S 600 (221.176)
S 63 AMG (221.077)
S 65 AMG (221.179)
1Canada onlyOverall vehicle length
205.0 in (5 210 mm)
Overall vehicle width (exterior rear view mirrors folded out)
83.2 in (2 115 mm)
Overall vehicle width (exterior rear view mirrors folded in)
73.7 in (1 928 mm)
Overall vehicle height
All models except S 63 AMG
58.46 in (1 485 mm)
S 63 AMG
58.0 in (1 473 mm)
Wheelbase
124.6 in (3 165 mm)
Track, front
63.2 in (1 600 mm)
Track, rear
63.3 in (1 606 mm)

764 Technical dataFuels, coolants, lubricants, etc.Capacities
Vehicle components and their respective
lubricants must match. Therefore use only
products tested and approved by
Mercedes-Benz.
Please refer to the Factory Approved
Service Products pamphlet (USA only), or
inquire at an authorized Mercedes-Benz
Center.
Warning!
G
Comply with all valid regulations with re-
spect to handling, storing and disposing of
service fluids. Otherwise you could endan-
ger persons or the environment.
Keep service fluids out of the reach of chil-
dren.
For health reasons, you should prevent ser-
vice fluids from coming into direct contact
with your skin or clothing.
If a service fluid is swallowed, contact a phy-
sician immediately.