heating MERCEDES-BENZ S-CLASS CABRIOLET 2019 Owner's Manual

1
Stow age compartment in the center console →
102
Soc ket →
107
2 Cup holder →
105
3 Stow age compartment in there ar armrest →
102 4
Stow age box in the seat backrest →
102
Through-loading feature →
103
5 Switches there ar seat heating on/off →
92 At
aglance – Control settings in there ar passenger compartment 15

#
Save the settings using the memory function
(→ page 98).
% The head restra int height will be adjus ted
automatically when you adjust the seat
height or the seat fore -and-aft position. Ad
justing the front passen ger seat electri‐
cally from the driver's seat Re
quirements:
R Toselect the front passenger seat: the po wer
supply is switched on
% This function is not available for all models. Yo
u can call up thefo llowing functions forthe
front passenger sea t:
R Seat adjustment
R Seat heating
R Seat ventilation
R Memory function #
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. #
Adjust the front passenger seat using the
buttons on the door control panel on the
driver's side. Head
restra ints Ad
justing the front seat head restra ints
mechanically &
WARNING Risk of inju ryfrom adju sting
th eve hicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra int, thesteering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi‐
cle is in motion 88
Seats and stowing

#
Brief lypress button 1.
% Depending on the model, button 1is loca‐
te d on the door control panel on the driver's
side.
Au tomatically extending or retracting the
re ar seat head restra ints #
Toextend: fasten seat belt.
The head restra int is extended. #
Toretract: release seat belt.
The head restra int lo wersto its starting posi‐
tion. Configuring
the seat settings Re
quirements:
R The ignition is switched on.
Multimedia sy stem:
, Vehicle .
a Seats #
Select Driver's Seat orPassenger Seat.
Ad justing the backrest side bols ters #
Select Side Bolsters . #
Select the setting.
Ad justing the seat contour in the lumbar
re gion of the seat backrest (lumbar) #
Select Lumbar . #
Adjust the air cushion.
Setting the shoulder section #
Select Shoulders . #
Select the settings. Setting
the seat heating balance #
Select Seat Heating Balance. #
Select the settings.
Memory function #
Save the seat adjustments with the memory
function (→ page 98). Setting automatic adjustment of
the lateral
support (active multicontour seat) Multimedia sy
stem:
, Vehicle .
a Seats
Wi th th is function, the lateral support of the
active multicontour seat is automatically adjus‐
te dto the driving and cornering dynamics of the
ve hicle. #
Select Driver's Seat orPassenger Seat. #
Select Dynamic Seat. #
Select setting: Off,Level 1 orLevel 2. 90
Seats and stowing

instrument clus
ter.A wa rning tone will also
sound.
The seat will mo vetothe sa ved position.
If th e pr evious seat position can no longer be
set, e.g. because of luggage in there ar foot we ll
or af ter occupants ha veentered there ar of the
ve hicle: #
Pull seat release handle 1again and return
th e seat backrest toan upright position.
The seat will lock in the new fore -and-aft
position. Switching the seat heating on and off
&
WARNING Risk of bu rns due torepeat‐
edly switching on the seat heating
Re peatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding tobecome very hot.
The health of persons with limited temp era‐
ture sensitivity or a limited ability toreact to
high temp eratures may be af fected or they
may even su ffer burn-like injuries. #
Do not repeatedly switch on the seat
heating. *
NO
TEDama getothe seats caused by
objects or documents when the seat
heater is switched on When
the seat heater is switched on, over‐
heating can occur due toobjects or docu‐
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
th e seat sur face. #
Makesure that no objects or docu‐
ments are on the seats when the seat
heater is switched on. Re
quirements:
R The po wer supply is switched on 92
Seats and stowing

#
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
Depending on the heating le vel, up tothree
indicator lamps will light up. #
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
If all indicator lamps are off, the seat heating
is switched off.
% The seat heating will automatically switch
down from theth re e heating le vels af ter 8,
10 and 20 minutes until the seat heating
switches off.
% Ifyo u swit ch the power supply off and on
again within 20 minutes, the pr evious setting
of the seat heating forth e driver's seat will
re main active.
% You can set the distribution of the heated
sections of the seat cushions and seat
backrests on the front and rear seats via the
multimedia sy stem (→ page 93).
% Vehicles with theWa rmthComfort Package:
yo u can adjust the heating of the center con‐
sole and the door armrests byusing the mul‐
timedia sy stem (→ page 93). Setting
the panel heating Re
quirements
R The seat heating is activated (→ page 92).
Multimedia sy stem:
, Vehicle .
î Vehicle Set-
tings .
Panel Heating #
Select one or more seats.
The armrests of the selected seats and the
center console are hea ted. Switching
the seat ventilation on/off Re
quirements:
R The po wer supply is switched on Seats and
stowing 93

#
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
Depending on theve ntilation le vel, up to
th re e indicator lamps will light up. #
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
If all indicator lamps are off, the seat ventila‐
tion is switched off.
% Ifyo u swit ch the power supply off and on
again within 20 minutes, the pr evious seat
ve ntilation setting forth e driver's seat will
re main active. Switching AIRSCARF on/off
&
WARNING Risk of bu rns caused bythe
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can flow from the outlet opening in the head
re stra ints.
This could result in burns in the immediate
vicinity of the outlet opening. #
Turn the heating output down in good
time. #
Maintain a suitable dis tance from the
outlet opening. Re
quirements:
R The po wer supply is switched on AIRSCARF
warmsth e head and neck area of
ve hicle occupants with warm air. The warm air
fl ow s out of theve nts in the head restra ints. 94
Seats and stowing

#
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
Depending on the heating le vel, up tothree
indicator lamps will light up. #
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
If all the indicator lamps are off, AIRSCARF is
switched off.
% When switching on, the blo wer will start up
on lyafte r a preheating phase lasting a few
seconds.
Af ter switching off, the blo wer will continue
to runfo r a few seconds tocool down the
heating elements.
% Ifth eve hicle battery voltage is too lo w,AIR‐
SCARF may switch off. #
Adjust the AIRSCARF vent (→ page 128).
Ma kesure that there are no objects co vering the
intake grille on the back of the head restra int.
Make sure that objects do not enter theve nts in
th e head restra ints. Ste
ering wheel Ad
justing the steering wheel electrically &
WARNING Risk of inju ryfrom adju sting
th eve hicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra int, thesteering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi‐
cle is in motion #
Before starting the engine: adjust the
driver's seat, the head restra int, the
st eering wheel or the mir ror and fasten
yo ur seat belt. &
WARNING Risk of entrapment forch il‐
dren when adjusting thesteering wheel
Children could injure themselves if they
adjust thesteering wheel. #
Never lea vechildren unat tended in the
ve hicle. #
When leaving theve hicle, alw aysta ke
th e SmartK eywith you and lock the
ve hicle. The
steering wheel can be adjus ted when the
po we r supp lyis switched off. Seats and
stowing 95

Operating
the memory function &
WARNING Risk of an accident if the
memory function is used while driving
If yo u use the memory function on the driv‐
er's side while driving, you could lose cont rol
of theve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station‐
ar y. &
WARNING Risk of entrapment when set‐
ting the seat with the memory function
When the memory function adjusts the seat
or steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. #
During the setting procedure of the
memory function, ensure that no body
parts are in the sweep of the seat or
th esteering wheel. #
If somebody becomes trapped, immedi‐
ately release the memory function posi‐
tion button.
The adjustment process is stopped. &
WARNING Risk of entrapment if the
memory function is activated bychildren
Children could become trapped if they acti‐
va te the memory function, particularly when
unattended. #
Never lea vechildren unat tended in the
ve hicle. #
When leaving theve hicle, alw aysta ke
th eke y with you and lock theve hicle. The memory function can be used when
the igni‐
tion is switched off.
St oring
The memory function is only available in vehicles
with the memory pac kage.
Seat adjustments for up tothre e people can be
st ored and called up using the memory function. The
following settings can be stored forth e front
seats:
R Seat, backrest, head restra int position and
con tour of the seat backrest in the lumbar
re gion
R Active multicontour seat: side bols ters of the
seat backrest, shoulder of the seat backrest,
conto ur ofthe seat backrest, dynamic func‐
tion le vel
R Seat heating: di stribution of the heated sec‐
tions of the seat cushion and seat backrest
R Driver's side: steering wheel position and
position of the outside mir rors on the driver's
and front passenger sides
R Head-up Display 98
Seats and stowing

Asht
ray and cigar ette lighter Using
the ashtr ayinthe front center console #
Toopen: briefly press marking 4.#
Toremo vethe inser t:grip the sides of
insert 1, push it forw ard and pull it upwards
2. #
Tore-install the inser t:press insert 1into
th e dr awe r until it engages. #
Toclose: pressstowage compartment 3
closed until it loc ks. Using
the cigar ette lighter in the front center
console &
WARNING ‑ Risk of fire and injury from
hot cigar ette lighter
Yo u can burn yourself if youto uch the hot
heating element or the soc ket of the ciga‐
re tte lighter.
In addition, flammable materials may ignite
if:
R you drop the hot cigar ette lighter
R ach ild holds the hot cigar ette lighter to
objects, forex ample #
Alw ays hold the cigar ette lighter bythe
knob. #
Alw ays make sure that the cigar ette
lighter is out of reach of children. #
Never lea vechildren unat tended in the
ve hicle. Re
quirements:
R The ignition is switched on. #
Press in cigar ette lighter 1.
The cigar ette lighter will pop out automati‐
cally when the heating element is red-hot. Soc
kets Using the
12V so cket inthe front center
console Re
quirements:
R Only devices up toa maximum of 180 W
(15 A) are permissible. 106
Seats and stowing

ve
hicle is unloc ked. When youstart theve hicle,
th e sur round lighting is deactivated and the
automatic driving lights are activated. Interior lighting
Ad
justing the in terior lighting #
1 0042 Switches there ar interior heating
on/off #
2 003D Switches the front right-hand read‐
ing lamp on/off #
3 0033 Switches the automatic interior
lighting control on/off #
4 004A Switches the front interior lighting
on/off #
5 003D Switches the front left-hand reading
lamp on/off Ad
justing the ambient lighting Multimedia sy
stem:
, Vehicle .
÷ Light Settings .
Ambi-
ent Light
Setting the color #
Select Color. #
Set a colo r.
Ad justing the brightness #
Select Brightness . #
Set a brightness value.
Ac tivating the brightness for zones #
Select Brightness Zones . #
Activate 0073or deacti vate 0053 the function.
The Display ,Front andRear zones can be set
separately. Ac
tivating multi-color lighting #
Select Multi-color. #
Activate 0073or deacti vate 0053 the function.
There are ten preset color combinations
av ailable.
Ac tivating multi-color animation #
Select Multi-color Anim. . #
Activate 0073or deacti vate 0053 the function.
The chosen color combination changes at
predefined inter vals.
Ac tivating dependency on air conditioning
settings #
Select Climate. #
Activate 0073or deacti vate 0053 the function.
If ch anges are made tothete mp erature set‐
ting in theve hicle, the color of the ambient
lighting changes brief ly.
Ac tivating welcome lighting #
Select Welcome. 11 6
Light and visibility