MERCEDES-BENZ S-CLASS SALOON LONG 2020 Owners Manual

Wa
rnings If
Traf fic Sign Assi stdetects a cor responding sit‐
uation, a triangle will be projected onto thero ad
in thefo llowing situations at speeds of at least
30 km/h:
R You are driving in the opposite direction to
th e permissible direction of tr avel, e.g. on a
mo torw ay slip road.
R You are driving towa rds a stop sign without
re ducing your speed.
R You are driving towa rds a red traf fic light
wi thout reducing your speed. Obser
vethe sy stem limits of Traf fic Sign Assi st
( / page 247).
Notes If
Traf fic Sign Assi stdetects a roadwor kszone,
th e sy stem will pr ovide support as follo ws:
R A cor responding symbol will be projected
onto thero ad when you en ter a roadwor ks
zone.
R When you drive thro ugh a roadwor kszone,
guide lines will be projected onto thero ad
th at roughly mat chthe width of theve hicle.
The guide lines will be suppressed for a while
on tight bends. Obser
vethe sy stem limits of Traf fic Sign Assi st
( / page 247).
Switching the Intelligent Light Sy stem
on/off
Re quirements:
R The ignition is switched on.
Multimedia sy stem:
4 © 5
Settings 5
Lights
5 MULTIBEAM LED #
Activate or deacti vate Dynamic dipped beam. 15 8
Light and sight

%
Invehicles with DIGITAL LIGHT headlamp s,
th e Intelligent Light Sy stem can be switched
on and off on theDIGITAL LIGHT menu.
Ac tivating or deactivating enhanced assis‐
tance functions
% The availability of the functions is dependent
on the count ry. #
Select Supporting projections .#
Activate or deacti vate the desired projection. #
Activate or deacti vate Projection when open-
ing/closing.
If th e locator lighting or theex terior switch-
off delay time is activated, a high-resolution
greeting or fare we ll scene will be pla yed back
fo r a short period of time when theve hicle is
opened or loc ked.
% More information on locator lighting
(/ page 161)
Mo reinformation on theex terior switch-off
delay time (/ page161) Ad
aptive Highbeam Assist Plus Ad
aptive Highbeam Assist Plus function &
WARNING Risk of accident despi te
Ad aptive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not
re act to:
R road users without lights, e.g. pedes‐
trians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recog‐
nise them too late.
In these, or in similar situations, the auto‐
matic high beam will not be deactivated or
will be activated despite the presence of
ot her road users. #
Alw ays obser vethero ad and traf fic
conditions carefully and switch off the
high beam in good time. Ad
aptive Highbeam Assist Plus cannot take into
account road, weather or traf fic conditions.
De tection may be restricted in thefo llowing
cases:
R in poor visibilit y,e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is on lyan aid.
Yo u are responsible for adju sting theve hicle's
lighting tothe pr evailing light, visibility and traf‐
fi c conditions. Light and sight
15 9

Ad
aptive Highbeam Assist Plus automatically
swit ches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam (only vehicles with
DIGITAL LIGHT) ULTRA RANGE Highbeam increases
the bright‐
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theexc luded vehicles.
At speeds below 25 km/h or when there is suf fi‐
cient stre et lighting:
R The partial high beam and the high beam will
be switched off automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RANGE Highbeam will
be swit ched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If highly reflective signs are de tected, ULTRA
RANGE Highbeam will be switched off au to‐
matical ly.
% The sy stem's optical sensor is located
behind the windscreen near theove rhead
control panel.
Switching Adaptive Highbeam Assist Plus
on/off
Switching on #
Turn the light switch tothe à position. #
Switch on the high beam using the combina‐
tion switch.
If Ad aptive Highbeam Assist Plus is activated,
th e_ indicator lamp will light up on the
driver's displa y.When partial high beam or
high beam is active, the cor responding blue
indicator lamp will also light up.
Switching off #
Switch off the high beam using the combina‐
tion switch. 16 0
Light and sight

Setting dipped beam
Multimedia sy
stem:
4 © 5
Settings 5
Lights
5 MULTIBEAM LED 5
Dipped beam #
Select Right-side traffic, Left-side trafficor
Automatic.
% Invehicles with DIGITAL LIGHT headlamp s,
th e Intelligent Light Sy stem can be adjus ted
on theDIGITAL LIGHT menu. Setting
theex terior lighting switch-off delay
time Re
quirements:
R The light switch is in theà position. Multimedia sy
stem:
4 © 5
Settings 5
Lights
5 Interior/exterior lighting
5 Exterior lighting delayed switch off #
Set the switch-off delay time.
When theve hicle's engine is switched off,
th eex terior lighting will be activated forthe
set time. Ac
tivating/deactivating the locator lighting Re
quirements:
R The light switch is in theà position.
Multimedia sy stem:
4 © 5
Settings 5
Lights
5 Interior/exterior lighting #
Activate or deacti vate Locator lighting.
When the function is activated, theex terior light‐
ing will light up for 40 seconds af terth eve hicle
is unloc ked. When youstart theve hicle, the
locator lighting is switched off and automatic
driving lights are activated. Interior lighting
Ad
justing the in terior lighting 1
c
Switches the front interior lighting
on/off
2 u
Switches there ar interior lighting
on/off
3 |
Switches automatic interior lighting
control on/off #
Toswitch reading lamps on/off: holdyour
hand under there spective reading lamp 4
or 5. Light and sight
161

Control panel inside
thegr ab handle (rear) 1
p
Reading lamp on there spective side of
th eve hicle
2 u
Rear interior lighting #
Toswitch reading lamps on: press button
1.
The reading lamp, the interior lighting in the
gr ab handle and the dome lamp on the
re spective side of theve hicle will light up. #
Toswitch reading lamps off: press button
1 once or twice.
Af ter pressing it once, the interior lighting in
th e grab handle and the dome lamp on the
re spective side of theve hicle will go out.
Af ter pressing it twice, there ading lamp on
th ere spective side of theve hicle will go out. #
Toswitch there ar interior lighting on/
off: press button 2.
The reading lamps, the interior lighting in the
gr ab handle and the dome lamps on bo th
sides of theve hicle will light up or go out. Ad
justing the ambient lighting Multimedia sy
stem:
4 © 5
Settings 5
Comfort
5 Ambient lighting
Setting the colour #
Select Colour. #
Select Monochrome orMulti-colour . #
Set the desired colour or colour combination. Ad
justing the brightness #
Select Brightness . #
Adjust the brightness.
% Depending on the ambient light conditions,
th e ambient lighting will automatically switch
between day and night modes.
Ac tivating the brightness for zones #
Select Brightness . #
Switch off Link zones .
The Direct ,Indirect andAccent zones can be
set separately.
% The Light band zone can also be set forve hi‐
cles with active ambient lighting.
Ac tivating ef fects &
WARNING Risk of an accident despi te
activated ef fects of ambient lighting and
acti veambient lighting
To use theWa rning Assis tance ef fects, the
re spective functions must be activated in the
driver assist menu. 16 2
Light and sight

#
Make sure that the functions and
assists are switched on. %
The exitwa rning sy stem is only an aid.
Fu rther no tes on driving sy stems and your
re sponsibility: (/ page219) #
Select Effects . #
Activate the desired ef fect.
% Depending on theve hicle equipment, dif fer‐
ent ef fects are available:
Operating feedback ef fects:
R Climate: If changes are made tothete mp era‐
ture setting in theve hicle, the colour of the
ambient lighting will change brief ly.
R Voice assistant: Forve hicles with active
ambient lighting, thevo ice assis tant is visu‐
ally anima ted.
Wa rning assis tance ef fects:
R Warning when exiting: If an object is de tec‐
te d in the blind spot while you are getting out
of theve hicle, the ambient lighting in the
af fected door will flash red. Fu
rther information on theex itwa rning
(/ page 251).
R Active Lane Keeping Assist: If there is a
wa rning from Active Lane Keeping Assist, the
active ambient lighting will flash red.
Fu rther information on Active Lane Keeping
Assis t: (/ page 255).
R Active Brake Assist: If there is an Active
Brake Assi stwa rning, the active ambient
lighting in the cent reofthe dashboard will
fl ash bright red.
Fu rther information on Active Brake Assi st
( / page 243).
R Active Blind Spot Assist : Invehicles with
active ambient lighting, the ambient lighting
on the af fected side will flash red if there is a
wa rning from Active Blind Spot Assi st.
Fu rther information on Active Blind Spot
Assi st (/ page 251).
Greeting R When youge t into theve hicle, a special col‐
our animation will pla y. Multi-colour animat.
R
The chosen colour combination will change
at predefined inter vals.
% Invehicles with active ambient lighting, an
animation will be pla yed.
% The desired operating feedback and warning
assis tance can be acti vated or deactivated
via the´ symbol. Depending on the
equipment, dif fere nt operating feedback and
wa rning assis tance ef fects are available.
% Ifth e brightness is set toa low le vel,wa rning
animations will be displa yed at a higher
basic brightness. Light and sight
16 3

Switching
the interior lighting switch-off
delay time on/off Multimedia sy
stem:
4 © 5
Settings 5
Lights
5 Interior/exterior lighting
5 Interior lighting delayed switch off #
Switch Interior lighting delayed switch off on
or off.
When this function is active, the interior light‐
ing will light up for a short time af terthe
ve hicle is loc ked. Wi
ndscreen wipers and windscreen washer
sy stem Switching
the windscreen wipers on/off 1
gWindsc reen wipers off
2 Ä Automatic wiping, normal
3 Å Automatic wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re‐
sponding position 1-5. #
Single wipe/washing: pushthe button on
th e combination switch in the direction of
ar row 1.
R í Single wipe
R î Wiping with washer fluid
Ve hicles with MAGIC VISION CONTROL: in
position 2or3 ,th e windscreen washing
process is automatically triggered if dirt is de tec‐
te d on the windscreen unless theTop up
washer fluid message is being displa yed.
Cleaning the windscreen intensively
Fo r heavy soiling, you can clean the windscreen
intensively from an outside temp erature of 5°C. #
In a stationary vehicle, turn the combination
switch toposition 1,2or3. 16 4
Light and sight

#
Press the button on the combination switch
in the direction of ar row1and hold it for
appr oximately two seconds.
The wiper arms will mo veinto there place‐
ment position and washer fluid will be distrib‐
uted on the windscreen.
Af ter appro ximately 30 seconds, the wiper
arms will mo veback again and wipe the
windscreen se veral times. Intensive cleaning
has now finished. Re
placing the windsc reen wiper blades &
WARNING Risk of becoming trapped if
th e windscreen wipers are switched on
while wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm. #
Alw ays switch off the windscreen wip‐
ers and ignition before changing the
wiper blades. Moving
the wiper arms into there placement
position #
Switch the ignition on and then off again
immediatel y. #
Within around 15seconds, press and hold
th eî button on the combination switch
fo r appro ximately thre e seconds
(/ page 164).
The wiper arms will mo veinto there place‐
ment position.
Re moving the wiper blades #
Foldthe wiper arms away from the wind‐
screen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm
in the direction of ar row4. Light and sight
16 5

Fi
tting the wiper blades #
Inse rtthe new wiper blade into the wiper
arm in the direction of ar row1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor‐
re ctly. #
Foldthe wiper arms back onto the wind‐
screen. #
Switch on the ignition. #
Press theî button on the combination
switch.
The wiper arms will return tothe original
position. #
Switch the ignition off. Maintenance display #
Remo veprotective film 1 from the mainte‐
nance display on the tip of the newly fitted
wiper blades.
When the colour of the maintenance display
ch anges from black to yellow, the wiper blades
should be replaced. 16 6
Light and sight

%
The duration until the colour changes varies
depending on the usage conditions. Re
placing the windsc reen wiper blades
(MAGIC VISION CONT ROL) Moving
the wiper arms into there placement
position #
Switch the ignition off. #
Within around 15seconds, press theî
button on the combination switch
(/ page 164).
The wiper arms will mo veinto there place‐
ment position. Re
moving the wiper blades #
Tobring the wiper blade into position to
be remo ved: hold the wiper arm firm ly in
one hand. With th eot her hand, turn the
wiper blade in the direction of ar row1
be yond the point of resis tance.
The wiper blade will engage in there mo val
position with a clic k. #
Toremo vethe wiper blade: pressrelease
knob 2, pull the wiper blade in the direction
of ar row3and remo ve.
Fi tting the wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row1until release
knob 2engages. Light and sight
167