charging MERCEDES-BENZ S450 HYBRID 2010 W221 Owner's Manual

A
ABS (Antilock Brake System) ............. 10
Warning lamp ................................... 24
Anticorrosion/antifreeze .................... 36
Antilock Brake System see ABS
Automatic transmission
Messages in the multifunction
display ............................................. 21
Axle oils ................................................ 35
B
BAS (Brake Assist System) ................. 11
Battery Charging .......................................... 28
Charging condition high-voltage
battery (COMAND) ...........................15
Charging condition high-voltage
battery (instrument cluster) .............15
Jump starting ................................... 29
Messages in the multifunction
display ............................................. 22
Safety notes ..................................... 26
see High-voltage battery
Brake Assist System
see BAS
Brakes
Messages in the multifunction
display ............................................. 23
Warning lamp ................................... 24
Brake system
see RBS
C
Capacities and recommended
fuel/lubricants .................................... 34
Charging condition high-voltage
battery (COMAND) ............................... 15
Climate control system ...................... 19
COMAND
Charging condition high-voltage
battery ............................................. 15
Fuel consumption ............................ 16
Generated electric power ................16
Overview .......................................... 14
Combustion engine
Malfunction ...................................... 25
Starting ............................................ 16
Consumption statistics (COMAND) ... 16
Control system
Overview .......................................... 14
Coolant
Anticorrosion/antifreeze .................36
Capacities ........................................ 35
Cruise control ...................................... 11
D
Displays
Charging condition high-voltage
battery (COMAND) ...........................15
Charging condition high-voltage
battery (instrument cluster) .............15
Messages in the multifunction
display ............................................. 20
Multifunction and COMAND
display ............................................. 15
DISTRONIC PLUS ................................. 11
Driving and parking
Safety notes ..................................... 16
Driving off ............................................ 17
Driving safety systems
ABS .................................................. 10
BAS .................................................. 11
RBS .................................................. 10
Driving systems
Cruise control .................................. 11
DISTRONIC PLUS ............................. 11
Driving tips .......................................... 18
DISTRONIC PLUS ............................. 18
E
ECO Start/Stop function .................... 17
Electric drive
Engine number ................................. 32
Engine
see Combustion engine
Engine number
Electric drive .................................... 32
Enviromental protection ....................... 7
ESC (Electronic Stability Control)
Warning lamp ................................... 24
4Index221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 4

F
Flat tire
Spare wheel ..................................... 34
Fluids
Automatic transmission fluid ...........35
Brake fluid ....................................... 35
Capacities ........................................ 34
Engine coolant ................................. 35
Engine oil ......................................... 35
Power steering fluid .........................35
Washer and headlamp cleaning
system ............................................. 35
Fuel
Capacity, fuel tank ...........................35
Fuels, coolants, lubricants etc. .......... 34
Fuel tank
Capacity ........................................... 35
H
High voltage see Safety notes
High-voltage battery ........................... 10
Charging .......................................... 29
Charging condition (COMAND) ........15
Exhaustive discharge .......................27
Messages in the multifunction
display ............................................. 22
Removing/installing cover ...............27
Hood
Messages in the multifunction
display ............................................. 22
HYBRID system
Automatic switch-off .................. 10, 26
Overview .......................................... 13
READY indicator lamp ......................16
I
Indicator lamp see Lamps, indicator and warning
Instrument cluster .............................. 14
Lamps .............................................. 24
Introduction ......................................... 12
J
Jump starting ....................................... 29
Jump start terminal
Removing/installing cover ...............28
L
Lamp see Lamps, indicator and warning
Lamps, indicator and warning ............ 24
ABS .................................................. 24
Brakes (red) ..................................... 24
ESC .................................................. 24
Instrument cluster ........................... 24
RBS .................................................. 24
SRS .................................................. 26
M
Message see Lamps, indicator and warning
Minispare wheel
see Spare wheel
Multifunction display
Symbol messages ............................ 22
Text messages ................................. 21
Vehicle status messages .................20
Multifunction display messages
Automatic transmission ...................21
Battery ............................................. 22
Brakes ............................................. 23
Display malfunction .........................20
Hood ................................................ 22
O
Operating safety .................................... 7
P
Parking ................................................. 18
R
RBS (Recuperative Brake
System) .......................................... 10, 12
Malfunction ................................ 24, 26
Warning lamp ................................... 24
READY indicator lamp ......................... 16
Index5221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 5

Introduction
The HYBRID technology combines an
economical combustion engine with a
powerful electric drive. The HYBRID system
selects the most efficient operating mode for
each driving situation automatically. You can
drive the vehicle in the usual manner.
The HYBRID system turns the combustion
engine off when stopping as often as possible
in order to save fuel. You will just have to
continue to keep the brake pedal depressed
or to activate the HOLD function. Thus, the
engine should normally never run at idle
speed.
When you remove the foot from the brake
pedal or accelerate when the HOLD function
is activated, the combustion engine starts
automatically. You can drive off as usual.GWarning!
When the green READY indicator lamp in the
instrument cluster is on while the combustion
engine is off, the combustion engine has been
turned off automatically. All vehicle systems
continue to be active. When you open the
driver’s door, unbuckle the seat belt, or take
your foot off of the brake pedal, the
combustion engine starts automatically. The
vehicle could start to drive off. An accident
causing serious or even fatal personal injury
to you and/or others could be the result.
Therefore, always do the following before
leaving the vehicle:
R Engage the electronic parking brake.
R Shift the automatic transmission into park
position P.
R Switch off the ignition. The green or yellow
READY indicator lamp goes out.
Driving off and accelerating consumes the
most energy. Thus, the electric drive supports
the combustion engine with the energy stored
in the high-voltage battery. The energy is also
used for semi-electrical driving, for operation
of the electric compressor of the cooling
system and to support the 12-volt on-board
power supply. The hybrid drive thereby
contributes significantly to the fuel economy
of your vehicle.
For information on driving and parking, see
( Y page 16).
The current operating mode of the HYBRID
system can be displayed in the multifunction
display and in the COMAND display
( Y page 14).
The COMAND can also display a chart of the
fuel consumption and the electric power that
has been generated ( Y page 16).
RBS
With the RBS activated ( Y page 10), the
electric drive functions as a generator when
coasting and braking. HYBRID converts the
energy of movement into electric power and
stores it in the high-voltage battery. The high-
voltage battery does not require additional
charging by other means.
12Controls in detail221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 12

Instrument clusterFunctionPage:÷ ABS/ESC warning
lamp
10,
24
;$ Brake warning lamp,
USA only24
J Brake warning lamp,
Canada only24
=é Recuperative Brake
System (RBS) warning lamp24
?Green or yellow READY
indicator lamp for the
HYBRID system16
AMultifunction display
with:
Charging level high-voltage
battery15
Control system and COMAND
iFor information on the instrument cluster
control system and COMAND operation,
refer to the Operator’s Manual.
The current operating mode of the HYBRID
system can be displayed in the multifunction
display and in the COMAND.
The COMAND can also display a chart of the
fuel consumption and the electric power that
has been generated (Y page 16).
Selecting submenu in the
multifunction display
Use the buttons on the multifunction steering
wheel.
XPress button = or ; to select the
Trip menu.
XPress button 9 or : to select the
HYBRID menu.
Selecting submenu in the COMAND
display
XSelect Vehicle Q Hybrid Q Energy.14Controls in detail221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 14

Multifunction display and COMAND
display examples
Example illustration: Operating mode display
1Combustion engine2Electric drive3High-voltage battery4Charging condition of high-voltage
battery in percent
5Flow of energy
The HYBRID components that are currently
active are highlighted in the multifunction
display and the COMAND display.
Multifunction
display
COMAND displayOperating modeThe electric drive functions as a
generator when coasting and
braking. HYBRID converts the
energy of movement into electric
power and stores it in the high-
voltage battery.
The arrows that indicate the flow
of energy are green.
Boost effect – the electric drive
supports the combustion engine
when driving off and when
accelerating.
The arrows that indicate the flow
of energy are red.
Normal driving – the combustion
engine powers the vehicle.
The arrows that indicate the flow
of energy are white.
Controls in detail15221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 15Z

ECO Start/Stop function
When the green READY indicator lamp : in
the instrument cluster is on, the combustion
engine turns off automatically when
R you stop the vehicle and keep the brake
pedal depressed
R you activate the HOLD function
All vehicle systems remain active, for
example the climate control system.
When you remove the foot from the brake
pedal or accelerate when the HOLD function
is activated, the combustion engine starts
automatically. You can drive off as usual.GWarning!
When the green READY indicator lamp in the
instrument cluster is on while the combustion
engine is off, the combustion engine has been
turned off automatically. All vehicle systems
continue to be active. When you open the
driver’s door, unbuckle the seat belt, or take
your foot off of the brake pedal, the
combustion engine starts automatically. The
vehicle could start to drive off. An accident
causing serious or even fatal personal injury
to you and/or others could be the result.
Therefore, always do the following before
leaving the vehicle:
R Engage the electronic parking brake.
R Shift the automatic transmission into park
position P.
R Switch off the ignition. The green or yellow
READY indicator lamp goes out.
The conditions for turning off the combustion
engine automatically are fulfilled when
R the combustion engine has reached its
operating temperature
R the driver seat belt is fastened and the
driver’s door is closed
R the vehicle has exceeded a speed of 9 mph
(15 km/h) after driving off. In subsequent
stop-and-go traffic, brief forward
movement of the vehicle is sufficient
R you take your foot off the accelerator pedal
R the hood is closed and properly engaged
R the automatic transmission is in drive
position D or neutral position N
R the high-voltage battery is charged
sufficiently
R the HYBRID system is operating
undisturbed
i For information on driving with the
DISTRONIC Plus, see ( Y page 18).
When the conditions for turning off the engine
automatically are not fulfilled, the yellow
READY indicator lamp : is illuminated. The
combustion engine does not turn off
automatically when
R the self-diagnosis of the engine
management is still running
R the temperature of the coolant or the
catalyst is too low
R the climate control system of the vehicle
requires the engine to run
R the battery is being charged
R the vehicle has moved backward shortly
before
R the automatic transmission is in reverse
gear R
R automatic emission tests are in progress
After the combustion engine has been turned
off automatically, it restarts automatically in
circumstances, when
R the charging condition of the high-voltage
battery has reached the lower limit
R the settings of the climate control systems
require the engine to run, for example at an
outside temperature over 100‡ (38 †)
Driving off
Depress the brake pedal and shift the
automatic transmission into drive position D
or reverse gear R. If the message Apply
Controls in detail17221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 17Z

Symbol messages Display messagesPossible causes/consequences and X SolutionsLThe hood is open. The combustion engine cannot be started.
Risk of accident!XClose the hood.cCharging
Hybrid
Battery
Please
WaitThe high-voltage battery is discharged. You have switched on
the ignition while the 12-volt battery was being charged with
an approved charge unit or while jump starting the vehicle.
The high-voltage battery is being charged via the voltage
transformer automatically. The message Engine Can Now
Be Started appears in the multifunction display after a few
minutes.XStart the combustion engine.XDisconnect the charge unit and drive the vehicle for some
time in order to charge the 12-volt battery and the high-
voltage battery.
If the display message Engine Can Now Be Started does
not appear after a few minutes:
XTry to start the combustion engine.XIf the combustion engine cannot be started: Contact an
authorized Mercedes-Benz Center.cMalfunctio
nThe combustion engine cannot be started. In addition, an
acoustic warning sounds.XContact an authorized Mercedes-Benz Center.The combustion engine is running and the HYBRID system is
malfunctioning. In addition, an acoustic warning sounds.XContact an authorized Mercedes-Benz Center.The combustion engine is running and the HYBRID system is
malfunctioning. In addition, an acoustic warning sounds.
Extreme operating conditions such as driving through
standing water can cause very high moisture in the engine
compartment.
The message disappears once the engine compartment is dry.22Practical hints221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 22

ProblemPossible causes/consequences and X SolutionsThe warning and
indicator lamps in the
instrument cluster fail
to come on when
switching on the
ignition.The 12-volt battery is discharged.XGet a jump start ( Y page 29).
or
XCharge the 12-volt battery ( Y page 28).
or
XContact an authorized Mercedes-Benz Center.
Combustion engine
ProblemPossible causes/consequences and X SolutionsThe combustion engine
cannot be started. The
warning and indicator
lamps in the instrument
cluster come on when
switching the ignition.
The message
Charging Hybrid
Battery Please
Wait appears in the
multifunction display.The high-voltage battery is discharged.
The discharged high-voltage battery is being charged with the
ignition switched on, provided the 12-volt battery is charged
sufficiently and an approved charge unit is connected.XRead and observe messages that may appear in the
multifunction display ( Y page 22).The combustion engine
cannot be started. The
multifunction display
does not display any
messages.The self-diagnosis has not been completed yet or the HYBRID
system is malfunctioning.XSwitch off the ignition and switch it back on.XTry to start the combustion engine once more.XIf the combustion engine cannot be started: Contact an
authorized Mercedes-Benz Center.The ECO Start/Stop
function does not start
the combustion engine
when attempting to
drive off.The ECO Start/Stop function may be malfunctioning. The lamps
in the instrument cluster are on.XShift the automatic transmission into park position P.XSwitch off the ignition and switch it back on.XStart the combustion engine.The HYBRID system is malfunctioning.XContact an authorized Mercedes-Benz Center.Practical hints25221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 25Z

GWarning!
The electrolyte, i.e. the battery fluid, is toxic
and caustic. Do not allow this fluid to come in
contact with eyes, skin or clothing, for
example in case of an accident.
In case it does, immediately flush affected
area with water and seek medical help
immediately.
For information on the location of the 12-volt
battery and the high-voltage battery, see
(Y page 13).
! Deep discharge caused by prolonged
periods of the vehicle not being used, can
damage the high-voltage battery.
During such periods, operate the vehicle
every 4 weeks for several minutes in order
to charge the high-voltage battery.
During the charging process, switch off
electrical consumers that are currently not
needed, e.g. climate control system or seat
heating.
If necessary, get a jump start.
GWarning!
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and lead to death. Do not
run the engine in confined areas (such as a
garage) which are not properly ventilated.
If you do not intend to operate your vehicle
for an extended period of time, contact an
authorized Mercedes-Benz Center about
steps you need to observe.
Removing/installing high-voltage
battery cover
XEngage the electronic parking brake.XShift the automatic transmission into park
position P.
XSwitch off the ignition.
The green or yellow READY indicator lamp
(Y page 16) in the instrument cluster goes
out.
XRemove the SmartKey from the starter
switch or remove the SmartKey with
KEYLESS-GO from the vehicle.
XObserve the safety notes on the danger of
electric shock in this manual.
XObserve the safety notes regarding the
hood in the Operator's manual.
XOpen the hood, see Operator's Manual.
Removing
XTurn locks 1 clockwise by 90°.XLift cover 2 as indicated by the arrows and
remove it forward as seen in driving
direction.
XStore cover 2 in the trunk for example.
Installing
Practical hints27221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 27Z

XPlace cover 1 onto the high-voltage
battery carefully.
XPush holder 2 onto pin 3.XTurn locks 4 counterclockwise by 90°.
The cover is locked.
Removing/installing jump start
contact cover
XRemove the high-voltage battery cover, see
(Y page 27).
Removing
XDisengage tabs :.XRemove cover ;.XStore cover 2 in the trunk for example.
Installing
XPosition cover ;.XPress down on cover ; until tabs 1
engage.
XInstall the high-voltage battery cover.! The cover must be positioned and
installed properly. Otherwise moisture
and/or dirt may impair fuse operation.
XClose the hood.
Charging the batteries
Charging the 12-volt battery
GWarning!
Never charge a battery while still installed in
the vehicle unless the accessory battery
charge unit approved by Mercedes-Benz is
being used. Gases may escape during
charging and could cause an explosion that
may result in personal injury, paint damage or
corrosion.
An accessory battery charge unit specially
adapted for Mercedes-Benz vehicles and
tested and approved by Mercedes-Benz is
available. It permits the charging of the
battery in its installed position. Contact an
authorized Mercedes-Benz Center for
information and availability.
Charge battery in accordance with the
separate instructions for the accessory
battery charger.
XRemove the high-voltage battery cover
(Y page 27).
XRemove the jump start terminal cover
(Y page 28).
XFollow the instructions in the separate
operating instructions of the charge unit.
28Practical hints221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 28