maintenance reset MERCEDES-BENZ S600 2006 W221 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: S600, Model: MERCEDES-BENZ S600 2006 W221Pages: 481
Page 8 of 481
Contents
DOT, Tire Identification Number
(TIN) ............................................. 318
Maximum tire load ....................... 319
Maximum tire inflation pressure .. 320
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 320
Tire ply material ........................... 322
Tire and loading terminology ........ 323
Rotating tires ............................... 326
Winter driving .................................... 327
Winter tires .................................. 327
Block heater (Canada only) .......... 328
Snow chains................................. 328
Maintenance...................................... 329
Clearing the maintenance
service indicator........................... 330
Maintenance service
term exceeded ............................. 330
Calling up the maintenance
service indicator........................... 330
Resetting the maintenance
service indicator........................... 331
Vehicle care ....................................... 332
Cleaning and care of vehicle ........ 332
Practical hints.................................. 339
What to do if …? ................................. 340
Lamps in instrument cluster ......... 340
Lamp in center console................. 348
Vehicle status messages
in the multifunction display ........... 349
Where will I find ...? ............................ 384
First aid kit.................................... 384
Vehicle jack, vehicle tool kit,
luggage bowl, spare wheel ............ 384
Unlocking/locking in an emergency... 388
Unlocking the vehicle.................... 388
Locking the vehicle ....................... 389
Fuel filler flap ................................ 390
Opening/closing in an emergency ..... 391
Tilt/sliding sunroof ....................... 391
Replacing SmartKey batteries ............ 392
SmartKey ...................................... 392
SmartKey with KEYLESS-GO* ....... 393
Replacing bulbs .................................. 394
Bulbs ............................................. 395
Replacing bulbs for front lamps .... 397
Replacing bulbs for rear lamps ..... 399Replacing wiper blades ...................... 401
Removing wiper blades ................. 401
Installing wiper blades .................. 402
Flat tire............................................... 403
Preparing the vehicle .................... 403
Mounting the spare wheel ............ 403
Battery ............................................... 408
Disconnecting the battery ............ 409
Removing the battery ................... 409
Charging and reinstalling
the battery .................................... 409
Reconnecting the battery ............. 410
Jump starting...................................... 411
Towing the vehicle.............................. 413
Installing towing eye bolt .............. 415
Fuses.................................................. 416
Aids for replacing fuses ................ 416
Fuse boxes in passenger
compartment ................................ 417
Fuse boxes in engine
compartment ................................ 418
Page 160 of 481
159 Controls in detail
Control system
Vehicle status message memory menu
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the sys-
tem. Such messages appear in the multi-
function display and are based on
conditions or system status the vehicle’s
system has recorded.
Press buttonè orÿ repeatedly
until the vehicle status message mem-
ory appears in the multifunction dis-
play.
No vehicle status messages
If no conditions are recorded in the memo-
ry, the message in the multifunction dis-
play is:
NO MESSAGESVehicle status messages have been re-
corded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
1Number of messages
Press buttonk orj.
The stored messages will now be dis-
played in the order in which the mal-
functions have occurred. See the
“Practical hints” section for malfunc-
tion and warning messages
(page 349).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position0 or re-
moved from the starter switch. If you press
the reset buttonJ(
page 140), the next
message will be displayed immediately.
Warning!
G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
page 349).
iThe vehicle status message memory
will be cleared when you switch on the
ignition. You will then only see high-pri-
ority messages in the multifunction dis-
play. These are highlighted in red color
(page 349).
Page 331 of 481
330 OperationMaintenanceClearing the maintenance service indi-cator
The maintenance service indicator is auto-
matically cleared after 30 seconds when
you switch on the ignition or when reach-
ing the maintenance service threshold
while driving. You can also clear it yourself.
1Reset buttonJ
Press the reset buttonJ1.
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the multifunction
display:'A' SERVICE
EXCEEDED BY
XXXX MI(Canada:
XXXX KM
)
'A' SERVICE
EXCEEDED BY
XXX DAYS
'A' SERVICE
EXCEEDED BY
X DAYIn addition, a signal sounds when the mes-
sage appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance ser-
vice.Calling up the maintenance service in-
dicator
Switch on the ignition (
page 34).
The standard display of the control sys-
tem appears (
page 148).
Press button k or j on the mul-
tifunction steering wheel until the
maintenance service indicator with the
service symbol 9 or ´ and the
service deadline appears in the multi-
function display.iIf the battery is disconnected, the days
of disconnection will not be included in
the count shown by the maintenance
service indicator. To arrive at the true
maintenance service deadline, you will
need to subtract these days from the
days shown in the maintenance service
indicator.
Do not confuse the maintenance ser-
vice indicator with the engine oil level
indicator :.
Page 332 of 481
331 Operation
Maintenance
Resetting the maintenance service indi-cator
In the event that the maintenance service
on your vehicle is not carried out by an au-
thorized Mercedes-Benz Center, you can
have the maintenance service indicator re-
set. The automotive maintenance facility
carrying out the maintenance service will
find the information for resetting the main-
tenance service indicator in the mainte-
nance-relevant information for your
vehicle. Such information is available from
either your authorized Mercedes-Benz
Center or directly from Mercedes-Benz
USA, LLC.
iIf the maintenance service indicator
was inadvertently reset, have an autho-
rized Mercedes-Benz Center correct it.
Only reset if the proper maintenance
service has been performed. Resetting
the system without performing the
proper service as called for by the
maintenance service indicator will re-
sult in engine damage and/or other ve-
hicle damage not covered by the
Mercedes-Benz Limited Warranty.
Page 446 of 481
445 Technical terms
Distronic*
A driving convenience cruise control
system which helps the driver maintain
a pre-selected speed:
If there is no vehicle directly ahead,
the system operates in the same
way as conventional ->cruise con-
trol.
If a slower moving vehicle is ahead,
Distronic will reduce your vehicle
speed to the extent permitted by re-
duced throttle and up to 20% brak-
ing power to maintain the preset
minimum following distance.
DOT
(Department o
f Transportation)
(
page 323)
Engine number
The number set by the manufacturer
and stamped on the cylinder block to
uniquely identify each engine pro-
duced.Engine oil viscosity
Measurement for the inner friction (vis-
cosity) of the oil at different tempera-
tures. The higher the temperature an
oil can tolerate without becoming thin,
or the lower the temperature it can tol-
erate without becoming viscous, the
better the viscosity.
ESP
®(Electronic S
tability P
rogram)
Improves vehicle handling and direc-
tional stability.
ETD
(E
mergency T
ensioning D
evice)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem’s threshold to tighten the seat
belts.
->SRSFSS (Canada vehicles)
(F
lexible S
ervice S
ystem)
Maintenance service indicator in the
multifunction display that informs the
driver when the next vehicle mainte-
nance service is due. FSS evaluates
engine temperature, oil level, vehicle
speed, engine speed, distance driven
and the time elapsed since your last
maintenance service, and calls for the
next maintenance service accordingly.
GAWR
(G
ross A
xle W
eight R
ating)
(
page 323)
Gear range
Number of gears which are available to
the automatic transmission for shifting.
The automatic gear shifting process
can be adapted to specific operating
conditions using the selector lever.
Page 464 of 481
463 Index
Lighter see Cigarette lighter 250
Lighting 131
Automatic headlamp mode 132
Combination switch 135
Courtesy lighting 139
Daytime running lamp mode 133
Door entry lamps 139
Exterior lamp switch 131
Front fog lamps 134
High beam flasher 135
High beams 135
Instrument cluster illumination 140
Interior 137
Locator lighting 133
Low beam 131
Manual headlamp mode 132
Night security illumination 133
Parking lamps 131
Rear fog lamp 134
Settings (control system) 164
Trunk 138, 139
Limiting opening height of trunk lid* 105
Limiting the gear range 178Limp Home Mode 185
Line of fall 446
Loading 239
Cargo tie-down hooks 240
Instructions 240
Roof rack 239
Loading terminology 323
Loading the vehicle 300
Locator lighting 133
Setting 166
Lock button 446
Door handle (KEYLESS-GO*) 58
SmartKey 92
SmartKey with KEYLESS-GO* 96
Locking 55, 58, 92
Fuel filler flap 284
Global (SmartKey with
KEYLESS-GO*) 99
Global, SmartKey 94
Glove box 242
Vehicle in an emergency 389
Vehicle with KEYLESS-GO* 101
with the KEYLESS-GO* 58with the SmartKey 58
Locking knob 446
Loss of SmartKey 96
Loss of Smartkey with
KEYLESS-GO* 102
Low beam headlamps
Messages in display 370, 371
Replacing bulbs 395
Lowering
Vehicle 407
Lumbar support adjustment 122
M
Main Dimensions 433
Maintenance 12, 329
Maintenance service
Calling up the maintenance service
indicator 330
Overdue 330
Maintenance service indicator
Calling up 330
Clearing 330
Resetting 331
Page 470 of 481
469 Index
Reinstalling vehicle battery 409
Remote control
SmartKey 92
SmartKey with KEYLESS-GO* 96
Remote controls
Integrated 265
Remote door unlock
With Tele Aid 261
Removing
Vehicle battery 409
Wheel 406
Wiper blades 401
Replacing
Backup lamp bulbs 399
Battery (SmartKey with
KEYLESS-GO*) 393
Brake fluid 437
Brake lamp bulbs 399
Bulbs 394
Front lamp bulbs 397
License plate lamp bulbs 400
Parking lamp bulbs 399
Rear fog lamp bulbs 399, 400
Rear lamp bulbs 395, 399
Rear turn signal bulbs 399
Side marker lamp bulbs 399Standing lamp bulbs 399
Wiper blades 401
Reporting
Safety defects 18
Reset button in the instrument
cluster 160
Resetting
All functions (control system) 160
All functions of a submenu 161
Fuel consumption 158
Maintenance service indicator 331
Trip odometer 141
Residual heat utilization 202, 207, 448
Residual ventilation 202, 207
REST (Residual engine heat
utilization) 448
Restraint system see Infant and child re-
straint systems 71, 74
Rim 324
Rims and Tires 426
Roadside assistance 12
Tele Aid 257
Rolling code programming 266
RON (Research Octane Number) 285,
448
Roof rack 239Rubber parts
Cleaning 338
S
Safety
Occupant 60
Safety belts see Seat belts 43
Safety defects
Reporting 18
Safety systems
Driving 79
Screwdriver (vehicle tool kit) 385
Seat belt force limiter 69
Seat belts 67
Cleaning 337
Fastening 43
Proper use of 45, 68
Safety guidelines 64
Telltale 345
Seat cushion depth
Adjusting 123
Seat for and aft adjustment 118
Seat heater
Switching off 125
Switching on 125
Seat height 118
Page 475 of 481
474 IndexTemperature
Display mode 163
Setting units in display 163
Tires 307
Tie-down hooks (Trunk) 240
Tightening torque 449
Tightening torque (Wheel bolts) 407
Tilt/sliding sunroof
Stopping 214
Synchronizing 214
TIN 325
Tire
Vehicle maximum load on 325
Tire and Loading Information 301
Tire and loading terminology 323
Tire care and maintenance 298
Tire Identification Number see TIN
Tire inflation pressure
Checking 286, 306, 308
Setting units 164
Tire inflation pressure see the placard on
the fuel filler flapTire inspection 298
Tire load rating 325
Tire ply composition and material
used 325
Tire speed rating 278, 315, 325
Tire terminology 323
Tire traction 278
Tires 297
Direction of rotation 300
Driving instructions 277
Messages in display 376–383
Retreads 297
Rotating 326
Service life 298
Temperature 307, 322
Tire inflation pressure monitor warning
lamp 346
Tread depth 299, 327
Wear pattern 326
Winter 327
Tools 384Tow-away alarm 88
Arming 88
Canceling alarm 89
Disarming 88
Disarming for transport 88
Towing eye bolt (vehicle tool kit) 385
Installing 415
Towing the vehicle 413
Traction 179, 325
Transmission see Automatic
transmission 293
Tread 325
Tread depth 299
Tread depth (tires) 327
Treadwear indicators 325
Trip computer 157
Trip odometer
Resetting 141