menu settings MERCEDES-BENZ SL-Class 2005 R230 Comand Manual

103
Telephone*
Telephone operation
The following functions can be used during
a call:
Ending an active call
Switch on/off hands-free microphone
Change sound settings (Balance only),
(
page 98)
Transmitting other dial tones
(
page 99)
Ending an active call
Press
K.
The Telephone menu will appear.
Switching hands-free microphone on/
off (available if microphone is switched
on)
The microphone status is indicated by the
status of the
Mic Off soft key.
Press the Mic Off soft key.
The microphone is switched on or off.
The soft key status changes
accordingly.
When the microphone is off, the other
party cannot hear you. You can still
hear your partner.
i
You can use three-way calling if this
feature is offered by your mobile phone
service provider.
Refer to the mobile phone operator’s
manual or contact your mobile phone
service provider for feature availability
and operating instructions.Microphone
statusSymbol
Mic Off
Onwhite
Off black
230_Telefon_US_B.fm Seite 103 Mittwoch, 8. Dezember 2004 4:32 16

119
Navigation
Navigation main menu
Destination Memory
You can select destinations from the
Destination Memory (page 158).
Destination Entry
Activates the Destination Entry
menu (
page 124).
Last Destinations
You can select last destinations from
the
Last Destinations memory
(
page 155).
POIs:
Brings you to the
POIs input menu
(
page 160).
POIs are e.g. gas stations, parking
facilities or airports. Available soft keys
Home soft key:
You can edit the home address and
start route guidance (
page 138).
Mode soft key:
Brings you to the route mode setting
for the next route guidance
(
page 120).
Setting soft key:
Here, you can make audio settings for
the navigation announcements (treble,
bass, balance) (
page 121)
230_Navigati_US_B.fm Seite 119 Mittwoch, 8. Dezember 2004 4:37 16

121
Navigation
Navigation main menu
You can set the following for the navigation
announcements:
Bass and treble control (page 121)
Balance (page 121)
Volume (page 122)
In the Navigation main menu
(
page 118), press the Setting soft
key.
The Settings menu will appear.
The announcement
Navigation Is
Not Active
is made. Adjusting bass and treble
In the Settings menu, press the Bass
or
Treble soft key.
Press H or h .
You adjust bass or treble.
Press E or the Back soft key.
or
Wait until the display changes.
The new setting is saved. The
Navigation main menu appears. Adjusting balance
In the Settings menu, press the
Balance soft key.
Cross-hairs are displayed. The vertical
line indicates the fader setting. The
horizontal line indicates the balance
setting.
Press H or h .
Move the cross-hairs horizontally and
adjust the balance.
Audio settings for the navigation
announcements
i
Balance defines the sound center left/
right.
230_Navigati_US_B.fm Seite 121 Mittwoch, 8. Dezember 2004 4:37 16

122 Navigation
Navigation main menu
Press E or the Back soft key.
or
Wait until the display changes.
The new setting is saved. The
Navigation main menu will appear.
Adjusting the volume
The automatic navigation announcements
override the currently active audio source.
You can adjust the volume difference. The
setting will reduce the volume of the
currently active audio source for the
duration of the announcement.
In the Navigation main menu, press the
Setting soft key.
The Settings menu will appear.
In the Settings menu, press the
Nav.Vol. soft key.
Options for the reduction of audio
volume are displayed.
Use G or g to select an option.
Press E.
Wait until the Settings menu is
displayed again or press the
Back soft
key.
The new setting is saved. The
Navigation main menu will appear.
Press c.
The full view of the map appears. You
will see the vehicle’s current position.
Press any soft key.
The soft key displays will appear.
Saving current position
i
If a map submenu is displayed, you
need to press the button twice.
230_Navigati_US_B.fm Seite 122 Mittwoch, 8. Dezember 2004 4:37 16

126 Navigation
Destination input
Accepting the displayed destination
In the Destination Entry menu, press
E longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
or
Select the ( symbol in the
Destination Entry menu. Press H,
h , g , G to do so.
Press E. Entering another destination address
Press
h, H , g and G to select
the characters. After each selection,
press E.
Press F and f to select characters
diagonally.
or
Press one of the number keys 2 to
9 as often as needed.
A window will appear at the bottom of
the menu showing the available
characters.
Press the Delete soft key if
necessary.
The character last entered or the
character last acce pted by the system
is deleted.
i
You can only select admissible
characters. The character selected
appears magnified. If your input is
unambiguous, the system will
complete it.
i
For quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the cities stored on the
navigation DVD. The character
selected appears magnified. The
system will accept the entry if the input
matches the name of a city stored on
the navigation DVD.
230_Navigati_US_B.fm Seite 126 Mittwoch, 8. Dezember 2004 4:37 16

127
Navigation
Destination input
Press
E longer than 2 seconds to
confirm.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
or
Select the ( symbol in the
Destination Entry menu. Press H,
h , g , G to do so.
Press E.
The city list will appear. You can now
accept the city entered or select
another. Selecting a cityUse
g or G to select the desired
city.
Press E.
After you have selected a city one of
the following menus will appear:
For larger cities with more than 15
streets: Enter Street input menu
(
page 129).
For smaller cities with up to 15
streets: Select Street menu
(
page 130)
If no streets are available for the
selected city, or if a street extends
through several city centers:
Select CityCtr menu (
page 128)
i
Do not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
i
In some cases, the system may
distinguish cities of the same name by
area selection (
page 128).
i
Pressing the Back soft key will abort
the selection process.
i
If several options of a city are available,
another menu will appear where you
must make and confirm your desired
selection.
230_Navigati_US_B.fm Seite 127 Mittwoch, 8. Dezember 2004 4:37 16

130 Navigation
Destination input
Press E longer than 2 seconds to
confirm.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
or
Select the ( symbol in the Entry
menu. Press H, h , g , G to do
so.
Press E.
The street list will appear. You can now
select a street. Selecting a streetUse
g or G to select a street.
Press E.
The menu for starting the route
guidance function with the destination
data you have entered is displayed. The following soft keys are available to
further define your destination:Map soft key:
Brings you to the destination input
directly above the map (
page 135).
Intrsct. soft key:
You can select an intersection for the
destination street (
page 131).
Hse No. soft key:
Brings you to the destination street
house number input (
page 132).
i
If several options of streets are availab-
le, another menu will appear where you
must make and confirm your desired
selection.
230_Navigati_US_B.fm Seite 130 Mittwoch, 8. Dezember 2004 4:37 16

133
Navigation
Destination input
Press the Delete soft key if
necessary.
The number last entered is deleted.
Press E longer than 2 seconds to
confirm.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The Start Route Guidance menu
(
page 139) or a list for selecting a
house number or a house number area
will appear. Selecting a House Number Area
Press
g or G to select the desired
house number area.
Press E.
The Start Route Guidance menu will
appear (
page 139).
Entering a parking
After entering the destination street
(
page 129) or selecting a city center
(
page 128), you can select parking
nearby.
i
You can only select admissible
numbers. The number selected
appears magnified.
i
Do not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
i
House numbers may be displayed in
the list as single numbers, e.g.
1, or as
number areas, e.g.
2..8.
230_Navigati_US_B.fm Seite 133 Mittwoch, 8. Dezember 2004 4:37 16

144 Navigation
During route guidance

During route guidance
During route guidance you can use the soft
keys to activate additional menus and
displays and make settings.
The soft key displays will automatically
disappear after a few seconds.
During route guidance, press any soft
key.
The soft key displays will appear. Available soft keys
Info soft key:
Brings you to the Info menu.
St-over soft key:
Brings you to the stopover destination
function (
page 149).
Detour soft key:
Brings you to the Traffic Jam function
(
page 147).
Memory soft key:
Brings you to the save current location
function (
page 151).
Display soft key:
Brings you to the Display menu
(
page 151).
Soft key +:
Enlarge visible map section.
Soft key ):
Reduce visible map section.
Coord. soft key:
Brings you to the destination
coordinates input (
page 137).
Display the soft keys.
Press the Info soft key.
The Info menu will appear.
1 Your destination with estimated time of
arrival and the remaining distance
2 A stopover destination, if entered
(
page 149)
Displaying the soft keys
Info menu
230_Navigati_US_B.fm Seite 144 Mittwoch, 8. Dezember 2004 4:37 16

145
Navigation
During route guidance
Available soft keys
Route soft key:
Brings you to the route display on the
map.
Mode soft key:
Brings you to the route mode selection
menu (
page 120).
Setting soft key:
Brings you to the audio settings for the
navigation announcements
(
page 121). Displaying the route on the map
In the Info menu (page 144), press
the
Route soft key.
The map will appear. The route ahead
is blue-colored.
The destination is marked with a flag $
on the map, a stopover destination is
marked with a flag showing the letter
S.
Displaying the route list
In the Info menu (page 144), press
the
Route soft key.
The route appears on the map.
Press the List soft key.
The list of the remaining roads/route
sections appears.
The road currently travelled on is at the
top of the list.
Press G or g to scroll through the
list.
Use the
Page V and Page v soft keys
to display the next or previous page.
i
If a stopover destination has been
entered:
The estimated time of arrival and the
remaining distance to the destination
are displayed.
When the stopover destination is
reached, the system calculates the
route to the main destination and
indicates estimated time of arrival and
remaining distance.
i
Depending on the distance to the
destination, it may take some time
before the route display appears. i
Depending on the distance to the
destination, it may take a few moments
before the route list is completed.
The list will only be complete when the
route is completely calculated. This is
indicated by the word
Destination in
front of the last list entry.
230_Navigati_US_B.fm Seite 145 Mittwoch, 8. Dezember 2004 4:37 16