high beam MERCEDES-BENZ SL500 2005 R230 User Guide

336 Practical hintsWhat to do if …On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may ap-
pear in the multifunction display.
For your convenience the messages are di-
vided into two sections:

Text messages (
page 337)


Symbol messages (
page 345)
iSwitching on the ignition causes all in-
strument cluster lamps (except high
beam headlamp indicator lamp and
turn signal indicator lamps unless acti-
vated) as well as the multifunction dis-
play to come on. Make sure the lamps
and the multifunction display are in
working order before starting your jour-
ney.

360 Practical hintsWhat to do if …Left display
Right display
Possible cause
Possible solution
.
Brake lamp
Right
Auxiliary
lamp on!
The right brake lamp is malfunction-
ing. An auxiliary lamp has been
brought into use.

Visit an authorized Mercedes-Benz Center as
soon as possible.
Brake lamp
!
Drive to
workshop!
Brake lamp illumination is delayed
or lamp is permanently on.

Visit an authorized Mercedes-Benz Center as
soon as possible.
Front foglamp
Left
The left front fog lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
Front foglamp
Right
The right front fog lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
Rear foglamp
Left
The left rear fog lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
High beam
Left
The left high beam lamp is malfunc-
tioning.

Replace the bulb as soon as possible.
High beam
Right
The right high beam lamp is mal-
functioning.

Replace the bulb as soon as possible.
Left turn signal
Mirror
T h e l e f t t u r n s i g n a l i n t h e s i d e m i r r o r
is malfunctioning. This message will
only appear if all light emitting di-
odes have stopped working.

Have the LEDs replaced as soon as possible.

381 Practical hints
Replacing bulbs
Front lamps Rear lamps
Lamp
Type
1
Additional turn signal
LED
2
Turn signal lamp
1156 NA
3
Low beam
1
1Vehicles with Bi-Xenon* headlamps: Low beam
and high beam use the same D2S-35W lamp. Do
not replace the Xenon and Bi-Xenon* bulbs your-
self. See an authorized Mercedes-Benz Center.
D2S-35 W
4
Xenon headlamps:
High beam, high beam
flasher
H7 (55 W)
Bi-Xenon* head-
lamps:
High beam flasher
H7 (55 W)
Parking and standing
lamps
W 5 W
5
Fog lamp
HB4 (51 W)
6
Side marker lamp
W 5 W
Lamp
Type
7
Rear fog lamp
(driver’s side only);
replacement
P 21 W
1156/32 cp
8
High mounted brake
lamp
LED
9
Backup lamp;
replacement
P 21 W
1156/32 cp
a
Tail, parking and
standing lamp, side
marker lamp
LED
b
Tail, parking and
standing lamp, brake
lamp
LED
c
License plate lamps
C 5 W
d
Turn signal lamp;
replacement
P 21 W
1156/32 cp

382 Practical hintsReplacing bulbs
Notes on bulb replacement

Only use 12-volt bulbs of the same type
and with the specified watt rating.


Switch the lights off before changing a
bulb to prevent short circuits.


Always use a clean lint-free cloth when
handling bulbs.


Your hands should be dry and free of oil
and grease.


If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:


the additional turn signals in the exteri-
or rear view mirrors


the high mounted brake lamp


the brake lamps


the parking lamps and the side marker
lamps in the tail lamp unit


the rear fog lamps


the low beam (Xenon or Bi-Xenon*)
lamps


the front fog lamps
Warning!
G
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas. A
bulb can explode if you:

touch or move it when hot


drop the bulb


scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
iHave the headlamp adjustment
checked regularly.

383 Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to posi-
tion M (
page 123).

Open the hood (
page 270)
(except for side marker lamps).
1Bulb socket for turn signal lamp
2High beam headlamp cover
3Low beam headlamp cover (Xenon or
Bi-Xenon* lamp). Do not remove.4High beam bulbs
5Locking mechanism
6Parking and standing lampsFront turn signal bulb

Turn bulb socket 1 counterclockwise
and pull it out.

Push the bulb into socket 1, turn
socket 1 counterclockwise and re-
move it.

Insert the new bulb in socket 1, push
and turn bulb socket 1 clockwise.

Reinsert bulb socket 1 in lamp and
turn bulb socket 1 clockwise.
Warning!
G
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high volt-
age in Xenon and Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.

384 Practical hintsReplacing bulbsHigh beam/ high beam flasher bulbs
Press ends of headlamp cover tab to-
gether and remove high beam head-
lamp cover 2.

Pull the electrical connector off.

Turn locking mechanism 5 counter-
clockwise and take out the bulb.

Insert the new bulb so that the base lo-
cates in the recess on the holder.

Turn locking mechanism 5 clockwise.

Plug the connector onto the bulb.

Align high beam headlamp cover 2
and click it into place.Parking and standing lamp bulbs

Press ends of cover tab together and
remove high beam headlamp cover 2.

Pull out bulb socket 6 with the bulb.

Pull the bulb out of bulb socket 6.

Insert a new bulb in bulb socket 6.

Reinstall bulb socket 6.

Align high beam headlamp cover 2
and click it into place.Side marker bulbs

Carefully slide the side marker lamp to-
wards rear.

Remove the front end first.

Turn the bulb socket counterclockwise
and pull it out.

Pull the bulb out of the bulb socket.

Insert the new bulb in socket.

Reinstall the bulb socket, push it in,
and turn it clockwise.

To reinstall the side marker lamp, set
the rear end in bumper and let the front
end snap into place.

439 Technical terms
ABS
(A
ntilock B
rake S
ystem)
Prevents the wheels from locking up
during braking so that the vehicle can
continue to be steered.
ABC
(A
ctive B
ody C
ontrol)
Active, computer-controlled system
that hydraulically adjusts the suspen-
sion at all four wheels in response to
various driving situations.
Alignment bolt
Metal pin with thread. The alignment
bolt, or centering bolt, is an aid used
when changing a tire to align the wheel
with the wheel hub.BabySmart
TM1
airbag deactivation
system
This system detects if a special system
compatible child restraint seat is in-
stalled on the front passenger seat. The
system will automatically deactivate
the passenger front airbag when such a
seat is properly installed (indicator
lamp 7 on the glove box comes on).
BabySmart
TM compatible child seats
Special restraint system for children.
The sensor system for the passenger
seat prevents deployment of the pas-
senger front airbag if a BabySmart
TM
compatible child seat is installed. See
your authorized Mercedes-Benz Center
for availability.BAS
(B
rake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
Bi-Xenon headlamps*
Headlamps which use an electric arc as
the light source and produce a more in-
tense light than filament headlamps.
Bi-Xenon headlamps produce low
beam and high beam.
CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.
1BabySmart
TM
is a trademark of Siemens
Automotive Corp.

445 Index
A
ABC 220, 439
Messages in display 337
Oil level 275
Setting vehicle level 221
ABC switch 30
ABS 79, 80, 439
ABS control 80
Messages in display 338
Warning lamp 27, 325
ABS/ESP
Warning lamp 25, 324
Accelerator position, automatic
transmission 171
Accessory weight 305
Activating
Air circulation mode 187
Air conditioning (cooling) 192
Anti-theft alarm system 89
Central locking (control system) 156
Distance warning function* 217Distronic* 213
Easy-entry/exit feature 157
Electric air pump 398
ESP 84
Exterior lamps 123
Exterior rear view mirror parking
position 179
Hazard warning flasher 129
High beams 128
Ignition 36
Immobilizer 58
Parktronic* 226
Rear window defroster 189
Residual heat 190
Seat heating 117, 118
Seat ventilation* 119
Tow-away alarm 90
Windshield wipers 53
Active Body Control (ABC) switch 30
Active Body Control see ABC
Adding
Engine oil 274Adjusting
Air distribution 186
Air volume 185
Backrest tilt 40, 41
Exterior rear view mirrors 43
Head restraint height 41
Head restraint tilt 41
Interior rear view mirror 43
Lumbar support 115
Mirrors 43
Multicontour backrest* 116
Seat cushion depth 41
Seat cushion tilt 41
Seat height 41
Seat in the lumbar region 116
Seat in the shoulder region 116
Seats 39
Steering column in/out 42
Steering column up/down 42
Steering wheel 42

454 IndexHeight adjustment
Head restraints 41
Height adjustments
Vehicle level 221
High beam flasher 128
High beam headlamp indicator 27
High beam headlamps 52, 123, 381
Replacing bulbs 383
Switching on 128
High-performance brake system
(SL 65 AMG only) 258
Hood 270
Messages in display 357
Horn 23
Hydroplaning 260
I
Identification labels 418
Ignition 36, 38
Switching on 36
Immobilizer 88
Activating 58, 88
Deactivating 88Indicator lamps see Lamps, indicator and
warning
Infant and child restraint systems 74
Instrument cluster 24, 131, 441
Select language 149
Instrument lighting 131
Interior lighting 129
Automatic control 129
Delayed switch-off 155
Interior lighting control 31
Manual operation 130
Intermittent wiping 53
J
Jack 373
K
Key, Mechanical 374
Key-dependent memory 158KEYLESS-GO* 441
Closing power window with 195
Closing windows with 195
Important notes 101
Key positions 35
Starting the engine 49
Turning off the engine 59
KEYLESS-GO* start/stop button 29, 37,
49
Keys
Loss of 98
Kickdown 171, 441
Kilometers/miles in speedometer 148
Kilopascal 306
Kneebag 68
L
Labels, identification 418
Lamp bulbs, exterior 380
Lamps, exterior
Delayed switch-off 154
Exterior lamp switch 23, 51
Front 381
Headlamps 317

459 Index
Power train 442
Power window
Closing with KEYLESS-GO* 195
Power windows 193
Side windows 193
Synchronizing 195
Problems while driving 55
Production options weight 306
Program mode selector switch 443
Automatic transmission 30, 170
PSI 306
PULSE function (Massage function) 116
Q
Quick search
Phone book* 163
R
Radio
Satellite* 140
Select station 140Radio transmitters
Control and operation 264
Range (distance to empty)
Calling up 161
Reading lamp 31
Rear lamps see Tail lamps
Rear luggage compartment 232
Rear view mirrors see Mirrors
Rear window defroster 178, 189
Recommended inflation pressure 306
Redial memory 163
Refuelling 267
Regular checks 269
Regular driving style 220
Replacing
Backup lamp bulbs 385
Brake lamp bulbs 381
Bulbs 380
Front lamp bulbs 383
Front turn signal bulbs 383
Fuses 412High beam bulbs 383
License plate lamp bulbs 385
Low beam bulbs 383
Rear fog lamp bulb 385
Rear lamp bulbs 381, 385
Rear turn signal bulbs 385
Wiper blades 386
Reset button 25
Resetting
All functions (control system) 145
Fuel consumption statistics 160
Maintenance service indicator
(FSS) 314
Trip odometer 132
Residual heat utilization 190
Restraint systems 62
Airbags 62
Child seat recognition 62
Child seats 62
Emergency Tensioning Device
(ETD) 62, 72
Seat belts 62, 69